Emtek 11B5 Multi Point Lock Trim (Door Config #1) - Brass Plates, Modern Style (2" x 10"), Dummy Pair

Trim only. The 11B5 set gives you the plates and handles for a swinging patio door, and the multi point mortise lock box has to be ordered separately. If your door already has a working multi point lock in it and you just want new hardware on the faces, this is the right part. If you are building the opening from scratch, you need the lock case too.

Dummy means the handles do not retract or throw anything. There is no keying and no cylinder function on the 11B5 pair, so it is a pull on both faces. It is what you put on the inactive leaf of a pair of patio doors, or on a door where the multi point mechanism is driven by other means. If you need the handle to actually operate the multi point gearing, this is the wrong trim.

It covers 1-3/8 to 1-3/4 inch doors, which spans the usual residential patio door range. Mounting is surface mount with no door prep required, so you are not boring or mortising the face to install the plates. Door thickness is still a field you specify when ordering so the through-fixings come right.

3-5/8 inch center to center, with the cylinder position below the handle. That spacing and that cylinder location are what have to line up with the multi point lock case already in your door. Measure from your existing handle center to the cylinder center before ordering; if yours is a different spacing, a different Emtek door configuration is the one you want rather than Config #1.

Config #1 is referenced to Atrium, G-U, KML by Andersen, Andersen, Marvin Integrity, Paddock Lockmaster and Superior doors. Those are the multi point systems this plate layout and 3-5/8 inch center to center spacing is cut for. Identify the maker of your door or the lock case stamped in the edge, then match the configuration number.

Yes, right hand or left hand is a required choice. Even though nothing latches on a dummy set, the plate and lever orientation is handed. Stand outside the door, and the side the hinges are on tells you the hand.

Lever style is a required selection and runs the full Emtek brass lever range, from the modern L-Square, T-Bar and R-Bar bars in Faceted, Hammered, Knurled, Tribeca, Straight Knurled and White Marble, through Athena, Helios, Hermes, Luzern, Poseidon and Stuttgart, on to traditional patterns like Coventry, Rope, Rustic, Santa Fe, Wembley and Arts and Crafts. Finishes are seven: Oil Rubbed Bronze (US10B), Polished Nickel Lifetime (US14), Satin Nickel (US15), Flat Black (US19), Polished Chrome (US26), Unlacquered Brass (US3NL) and Satin Brass (US4). Any brass lever can be ordered with this plate, so you can match the levers already on your interior doors.

Brass, both the material and the substrate, in the Modern style at 2 by 10 inches. That plate size is worth checking against what is on the door now, because a smaller replacement will not cover the marks or holes left by wider trim.

It is residential hardware for swinging patio doors, not a commercial opening. For an apartment unit, a house, or the patio doors in a multi-family building it is the right class of product. For a storefront or a code-required commercial exit, you want commercial grade hardware instead.

No. The 11B5 is a mechanical, non-electronic dummy trim with no keying, so there is nothing on it to wire or program. If you want electronic access on a multi point patio door, you need an electronic multi point handleset rather than this trim set.

The cylinder classification on the 11B5 is American, so the prep in the plate is for an American standard mortise cylinder rather than a Euro profile. Note that the 11B5 itself is a dummy pair and comes unkeyed, so the cylinder question really applies when you pair it with the keyed active side of the same door configuration.