You may also like
Emtek 1184 Multi Point Lock Trim (Door Config #1) - Brass Plates, Concord Style (2" x 10.5"), Non-Keyed Fixed Handle Outside, Operating Handle Inside (for Semi-Active Door)
Model: EMTEK-1184
Specifications:
Door Configuration: Configuration #1
Plate Size: 2" x 10.5"
Material: Brass
Plate Style: Concord
Keyed: No
Function: Non-Keyed – Fixed Handle Outside / Operating Handle Inside...
Emtek
Starting at
$381.00
$304.80
Emtek 1484 Multi Point Lock Trim (Door Config #4) - Brass Plates, Concord Style (2" x 10.5"), Non-Keyed Fixed Handle Outside, Operating Handle Inside (for Semi-Active Door)
Model: EMTEK-1484
Specifications:
Door Configuration: Configuration #4
Plate Size: 2" x 10.5"
Material: Brass
Plate Style: Concord
Keyed: No
Function: Non-Keyed – Fixed Handle Outside / Operating Handle Inside...
Emtek
Starting at
$381.00
$304.80
Emtek 1284 Multi Point Lock Trim (Door Config #2) - Brass Plates, Concord Style (2" x 10.5"), Non-Keyed Fixed Handle Outside, Operating Handle Inside (for Semi-Active Door)
Model: EMTEK-1284
Specifications:
Door Configuration: Configuration #2
Plate Size: 2" x 10.5"
Material: Brass
Plate Style: Concord
Keyed: No
Function: Non-Keyed – Fixed Handle Outside / Operating Handle Inside...
Emtek
Starting at
$381.00
$304.80
Emtek 1584 Multi Point Lock Trim (Door Config #5) - Brass Plates, Concord Style (2" x 10.5"), Non-Keyed Fixed Handle Outside, Operating Handle Inside (for Semi-Active Door)
Model: EMTEK-1584
Specifications:
Door Configuration: Configuration #5
Plate Size: 2" x 10.5"
Material: Brass
Plate Style: Concord
Keyed: No
Function: Non-Keyed – Fixed Handle Outside / Operating Handle Inside...
Emtek
Starting at
$381.00
$304.80
Emtek 1384 Multi Point Lock Trim (Door Config #3) - Brass Plates, Concord Style (2" x 10.5"), Non-Keyed Fixed Handle Outside, Operating Handle Inside (for Semi-Active Door)
Model: EMTEK-1384
Specifications:
Door Configuration: Configuration #3
Plate Size: 2" x 10.5"
Material: Brass
Plate Style: Concord
Keyed: No
Function: Non-Keyed – Fixed Handle Outside / Operating Handle Inside...
Emtek
Starting at
$381.00
$304.80
Specifications:
- Door Configuration: Configuration #6
- Plate Size: 2" x 10.5"
- Material: Brass
- Plate Style: Concord
- Keyed: No
- Function: Non-Keyed – Fixed Handle Outside / Operating Handle Inside (Semi-Active)
- Product Type: Multi Point Lock Trim
Emtek 1684 Multi Point Lock Trim (Door Config #6) - Brass Plates, Concord Style (2" x 10.5"), Non-Keyed Fixed Handle Outside, Operating Handle Inside (for Semi-Active Door)
- Can be ordered with any Brass Levers
- Swinging Patio Door Hardware. Set includes Plates, Handles
- Multi Point Mortise Lock Box not included. Trims Only
- Each Multi Point Lock Trim now includes the Spring Assist function which returns the lever to the neutral position and eliminates sagging handles.
Manufacturer Resources
Emtek Multi Point Pocket Booket
Product Specs
- Subcategory:
- Multi Point Lock Trim
- Product Group:
- Mechanical Locks
- Commercial/Residential:
- Residential
- Product Type:
- Multi Point Lock Trim
- Product Subgroup:
- Multi Point Lock Trim
- Collection:
- Brass
- Cylinder Position:
- Below Handle
- Door Configuration:
- #6
- Electronic:
- No
- Keyed:
- No
- Lock Type:
- Multi Point Trim
- Ref. Door Manufacturer(s):
- Milgard, Pella
- Series:
- Concord
- Theme:
- American Classic
- MAP Policy:
- Yes
- Product Model:
- 1684
- (CTC) Center-to-Center:
- 3-5/8"
- Product Function:
- Non-Keyed Fixed Handle Outside, Operating Handle Inside
- Product Size:
- 2" x 10-1/2"
- Cylinder Classification:
- American
- Product Style:
- Concord
- Product Material:
- Brass
- Product Category:
- Mechanical Locks
- Product Substrate:
- Brass
- Department:
- Door Hardware
Emtek 1684-US15 – Frequently Asked Questions
1) What does Door Configuration #6 mean on the Emtek 1684 handle set?
Configuration #6 is the non-keyed setup for a semi-active door: a fixed (dummy) handle on the exterior and an operating lever on the interior. The inside lever retracts the latching points; there is no key cylinder because the leaf is not the primary operating door.
2) Will the Emtek 1684 Concord trim line up with my existing multi point lock holes?
The Concord plate measures 2 by 10-1/2 inches with a 3-5/8 inch center-to-center between the handle spindle and the cylinder position, and the cylinder location sits below the handle. Measure your door's existing spindle-to-cylinder dimension; if it is not 3-5/8 inches the plate will not line up with the lock prep.
3) Do I have to specify handing when ordering the Emtek 1684 trim?
Yes, handing is required. You choose right hand or left hand, plus a lever style and a finish. Door thickness can be entered as well so the spindle and screw pack match your door.
4) Can I use the Emtek 1684 on a Pella or Milgard swinging patio door?
Emtek lists Milgard and Pella as reference door manufacturers for this multi point trim. It is swinging patio door hardware, not sliding door hardware. Confirm your door's multi point lock uses the 3-5/8 inch center-to-center spacing before ordering.
5) I need a keyed handle set for the active leaf of my French doors, is this it?
No. The 1684 is the non-keyed, semi-active trim, meaning fixed outside handle and no cylinder. For the active leaf you want a keyed Emtek multi point configuration with an operating handle and cylinder outside. Pair them so both leaves carry the same Concord plate and lever.
6) What finishes does the Emtek 1684 Concord multi point trim come in?
Eight: Oil Rubbed Bronze (US10B), Satin Nickel (US15), Pewter (US15A), Flat Black (US19), Polished Chrome (US26), Polished Brass Lifetime (US3), Unlacquered Brass (US3NL), and French Antique (US7). Unlacquered brass will patina over time; the lifetime polished brass will not.
7) Will the levers on this Emtek multi point trim sag over time?
Emtek's multi point trims now ship with a spring assist that returns the lever to neutral, which is what stops the drooping handle you see on older patio door trim. Any of the brass lever styles can be ordered on it.
8) Is the Emtek 1684 trim solid brass, and is it rated for commercial use?
Plates and handles are brass, and Emtek classifies this multi point trim as residential. It is intended for swinging patio and French doors in homes rather than high-traffic commercial openings.
9) If I later add a cylinder to this door, what type fits the Concord trim?
The Concord plate is prepped for an American-classification cylinder, positioned below the handle. Note that the 1684 configuration itself is the non-keyed version; if you need key access on that leaf, order the keyed configuration instead of retrofitting this plate.
How fast can I get the Emtek 1684-US15 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Emtek 1684-US15 come with a warranty?
Absolutely. The Emtek 1684-US15 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Emtek 1684-US15?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Emtek 1684-US15 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.