Emtek 1743 Multi Point Lock Tr...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$424.00
$339.20
Emtek Emtek 1743 Multi Point Lock Trim (Door Config #7) - Lost Wax Cast Bronze Plates, Tuscany Style (1.5" x 11"), Non-Keyed American Style Thumbturn Inside EMTEK-1743

Emtek 1743 Multi Point Lock Trim (Door Config #7) - Lost Wax Cast Bronze Plates, Tuscany Style (1.5" x 11"), Non-Keyed American Style Thumbturn Inside

(No reviews yet) Write a Review

Model: 1743-MB
From the Tuscany Bronze Collection
$424.00
$339.20
Selected Finish is
Selected Lever Style is
Selected Handing is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$424.00
$339.20
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

 

Specifications:

  • Door Configuration: Configuration #7
  • Plate Size: 1.5" x 11"
  • Material: Lost Wax Cast Bronze
  • Plate Style: Tuscany
  • Keyed: No
  • Function: Non-Keyed – Thumbturn Inside
  • Product Type: Multi Point Lock Trim

 

Emtek 1743 Multi Point Lock Trim (Door Config #7) - Lost Wax Cast Bronze Plates, Tuscany Style (1.5" x 11"), Non-Keyed American Style Thumbturn Inside

  • Can be ordered with any Lost Wax Cast Bronze Levers (any Tuscany Bronze Levers)
  • Swinging Patio Door Hardware. Set includes Plates, Handles
  • Multi Point Mortise Lock Box not included. Trims Only
  • Each Multi Point Lock Trim now includes the Spring Assist function which returns the lever to the neutral position and eliminates sagging handles.
Manufacturer Resources

Product Specs

Subcategory:
Multi Point Lock Trim
Product Group:
Mechanical Locks
Commercial/Residential:
Residential
Product Type:
Multi Point Lock Trim
Product Subgroup:
Multi Point Lock Trim
Collection:
Tuscany Bronze
Cylinder Position:
Above Handle
Door Configuration:
#7
Electronic:
No
Keyed:
No
Lock Type:
Multi Point Trim
Ref. Door Manufacturer(s):
Trillenium (formerly W&F Manufacturing)
Series:
Tuscany
Theme:
Tuscany
MAP Policy:
Yes
Product Model:
1743
(CTC) Center-to-Center:
6"
Product Function:
Non-Keyed American Style Thumbturn Inside
Product Size:
1-1/2" x 11"
Cylinder Classification:
American
Product Style:
Tuscany Bronze
Product Material:
Bronze
Product Category:
Mechanical Locks
Product Substrate:
Bronze
Department:
Door Hardware

Emtek 1743-MB – Frequently Asked Questions

1) What door configuration does the Emtek 1743 fit, and what does Config #7 mean?
It is built for Door Configuration #7, with the cylinder hole above the handle and an American-style cylinder prep. Inside, there is no key cylinder, just a thumbturn. If your door's existing prep puts the cylinder below the handle or uses a euro-profile cylinder, this trim will not line up.
2) What is the center-to-center spacing on this Emtek multi point trim?
6 inches center to center, measured between the handle and the cylinder opening. That figure has to match the prep in your door and the multi point lock case behind it, since the plate is a fixed casting and cannot be shifted.
3) How big are the escutcheon plates on the Emtek 1743, and will they fit a narrow patio door stile?
The plates measure 1-1/2 by 11 inches, a slim Tuscany-style casting that suits the narrow stiles common on swinging patio doors. Measure your stile face before ordering: you need at least 1-1/2 inches of flat width for the plate to sit fully on the stile.
4) Do I have to specify handing when ordering the Emtek 1743 trim?
Yes, handing is a required selection: right hand (RH) or left hand (LH). Multi point trim is handed because the thumbturn and lever orientation are fixed at the factory, so an LH set will not work on an RH door. Determine handing from the inside of the door, standing on the side the hinges are visible.
5) Will this Emtek trim work on my Trillenium (W&F) patio door?
Trillenium, formerly W&F Manufacturing, is the reference door manufacturer for this trim, and Config #7 with 6 inch center-to-center is the prep it is cut for. Confirm the actual bore spacing on your door and that the cylinder hole sits above the handle before committing.
6) Is the Emtek 1743 multi point trim rated for commercial use?
It is a residential product, intended for swinging patio doors in homes. For an apartment or hotel exterior door in a high-traffic commercial opening, specify commercial-grade hardware instead. This is a decorative cast bronze trim for residential entry and patio doors.
7) Which lever styles can I put on the Emtek 1743 Tuscany trim?
Four Tuscany bronze levers are offered with it: Medici (MD), Napoli (NA), Octagon (OCL), and Padua (PD). Lever choice is required at order. Emtek also allows any lost wax cast bronze Tuscany lever on this trim, so the plate can be matched to levers already used elsewhere in the house.
8) Can I key the inside of the Emtek 1743, or is it thumbturn only?
Thumbturn only on the interior. The 1743 is a non-keyed function, so there is no inside cylinder and no double-cylinder option. If you need a key on both sides, for example on a rental unit or an egress door where you want key control from inside, pick a keyed inside function instead of this one.
9) Do I need to give a door thickness when ordering the Emtek 1743?
There is an optional door thickness field on the order. Supply your measured thickness if the door is anything other than standard, since spindle and screw length on multi point trim depend on it. On a nonstandard slab, measuring and stating the thickness up front avoids a short spindle on arrival.
10) Is the Emtek 1743 an electronic or smart lock?
No electronics in it. The 1743 is mechanical trim, non-keyed with a thumbturn inside, driving a multi point mortise lock case that you supply. There is no motor, keypad, or wiring, and no power prep is needed in the door.
How fast can I get the Emtek 1743-MB delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Emtek 1743-MB come with a warranty?
Absolutely. The Emtek 1743-MB is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Emtek 1743-MB?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Emtek 1743-MB from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!