Emtek 1834 Multi Point Lock Tr...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$424.00
$339.20
Emtek Emtek 1834 Multi Point Lock Trim (Door Config #8) - Lost Wax Cast Bronze Plates, Tuscany Style (1.5" x 11-1/8"), Non-Keyed Fixed Handle Outside, Operating Handle Inside (for Semi-Active Door) EMTEK-1834

Emtek 1834 Multi Point Lock Trim (Door Config #8) - Lost Wax Cast Bronze Plates, Tuscany Style (1.5" x 11-1/8"), Non-Keyed Fixed Handle Outside, Operating Handle Inside (for Semi-Active Door)

(No reviews yet) Write a Review

Model: 1834-MB
From the Tuscany Bronze Collection
$424.00
$339.20
Selected Finish is
Selected Lever Style is
Selected Handing is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$424.00
$339.20
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

 

Specifications:

  • Door Configuration: Configuration #8
  • Material: Lost Wax Cast Bronze
  • Plate Style: Tuscany
  • Keyed: No
  • Function: Non-Keyed – Fixed Handle Outside / Operating Handle Inside (Semi-Active)
  • Product Type: Multi Point Lock Trim

 

Emtek 1834 Multi Point Lock Trim (Door Config #8) - Lost Wax Cast Bronze Plates, Tuscany Style (1.5" x 11-1/8"), Non-Keyed Fixed Handle Outside, Operating Handle Inside (for Semi-Active Door)

  • Can be ordered with any Lost Wax Cast Bronze Levers (any Tuscany Bronze Levers)
  • Swinging Patio Door Hardware. Set includes Plates, Handles
  • Multi Point Mortise Lock Box not included. Trims Only
  • Each Multi Point Lock Trim now includes the Spring Assist function which returns the lever to the neutral position and eliminates sagging handles.
Manufacturer Resources

Product Specs

Subcategory:
Multi Point Lock Trim
Product Group:
Mechanical Locks
Commercial/Residential:
Residential
Product Type:
Multi Point Lock Trim
Product Subgroup:
Multi Point Lock Trim
Collection:
Tuscany Bronze
Cylinder Position:
Above Handle
Door Configuration:
#8
Electronic:
No
Keyed:
No
Lock Type:
Multi Point Trim
Ref. Door Manufacturer(s):
Neuma Doors
Series:
Tuscany
Theme:
Tuscany
MAP Policy:
Yes
Product Model:
1834
(CTC) Center-to-Center:
5-1/4"
Product Function:
Non-Keyed Fixed Handle Outside, Operating Handle Inside
Product Size:
1-1/2" x 11-1/8"
Cylinder Classification:
American
Product Style:
Tuscany Bronze
Product Material:
Bronze
Product Category:
Mechanical Locks
Product Substrate:
Bronze
Department:
Door Hardware

Emtek 1834-MB – Frequently Asked Questions

1) Does the Emtek 1834 multi point trim include the multi point lock body?
No. The Emtek 1834 is trim only: plates and handles for a swinging patio door. The multi point mortise lock box has to be sourced separately, so you need to know which multi point lock is already in the door (or which one is being ordered with the door) before you buy the trim.
2) What does Door Configuration #8 mean on an Emtek multi point trim?
Configuration #8 is the non-keyed semi-active door setup: a fixed (dummy-style) handle on the exterior and an operating handle on the interior. It is what goes on the inactive or semi-active leaf of a French or patio pair, where you do not want anyone entering from the outside on that leaf. If you need a key cylinder and an operating exterior handle, configuration #8 is the wrong one.
3) Will the 1834 trim line up with my existing multi point lock hole prep?
The plates measure 1-1/2 by 11-1/8 inches with 5-1/4 inch center-to-center spacing between the handle and the cylinder hole, and the cylinder position is above the handle. Measure your door's existing prep center to center; if it is not 5-1/4 inches with the cylinder opening above the lever, the plates will not cover and align. Note the plates on the 1834 are non-keyed, so the cylinder hole position matters for matching the mate plate on the active leaf, not for a cylinder in this trim.
4) Do I have to specify handing when ordering the Emtek 1834?
Yes, handing is a required choice, right hand or left hand. Since this trim goes on the semi-active leaf of a pair, get the handing from the door itself rather than guessing from the pair as a whole. Lever style is also a required selection.
5) Will the Emtek 1834 fit a Neuma patio door?
Neuma Doors is the reference door manufacturer for this configuration, so the plate size and 5-1/4 inch center-to-center spacing correspond to that prep. Confirm the specific multi point lock model in your Neuma slab, since the trim has to suit the lock box already installed.
6) Which levers can I put on the Emtek 1834 Tuscany bronze trim?
Four Tuscany lost wax cast bronze levers are offered with it: Medici, Napoli, Octagon, and Padua. Any Tuscany bronze lever in the Emtek lost wax cast bronze line will mount, so you can match the levers already used on interior doors in the same house.
7) What finishes does the Emtek 1834 come in, and will they match other Tuscany bronze hardware?
Two finishes: Flat Black Bronze (FB) and Medium Bronze (MB). Both are part of Emtek's Tuscany Bronze collection, so they are made to sit alongside other Tuscany Bronze levers, knobs, and entry sets in the same finish code. Because the plates are lost wax cast bronze, expect the natural variation and patina you get with cast bronze rather than a uniform plated look.
8) Why does the order form ask for door thickness on this trim?
Door thickness is an optional entry because multi point trim spindles and mounting screws have to reach through the door to the lock body and the opposite plate. Giving the actual thickness of your patio door slab lets the trim be supplied with hardware of the right length, which matters on thicker or clad wood patio doors.
9) Is this Emtek trim suitable for a commercial opening, or residential only?
Residential. The 1834 is swinging patio door hardware for houses, and it carries no commercial grading. For a commercial or multi-family exterior opening you want a graded commercial lockset rather than decorative multi point patio trim.
10) If I need a keyed cylinder on the active leaf, what cylinder type does the Emtek Tuscany multi point trim use?
Emtek's multi point trim in this family is prepped for an American standard cylinder mounted above the handle. The 1834 itself is the non-keyed semi-active trim and takes no cylinder, so the keyed cylinder goes into the keyed configuration trim on the active leaf of the pair.
11) Do the handles on this Emtek multi point trim sag over time?
Spring Assist is built into every current Emtek multi point lock trim, including the 1834. It returns the lever to horizontal after use, which is what prevents the drooping lever problem common on older multi point trim. It is mechanical, with no electronics involved.
How fast can I get the Emtek 1834-MB delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Emtek 1834-MB come with a warranty?
Absolutely. The Emtek 1834-MB is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Emtek 1834-MB?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Emtek 1834-MB from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!