Emtek 1842 Multi Point Lock Tr...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$424.00
$339.20
Emtek Emtek 1842 Multi Point Lock Trim (Door Config #8) - Lost Wax Cast Bronze Plates, Tuscany Style (2" x 10.5"), Non-Keyed Passage EMTEK-1842

Emtek 1842 Multi Point Lock Trim (Door Config #8) - Lost Wax Cast Bronze Plates, Tuscany Style (2" x 10.5"), Non-Keyed Passage

(No reviews yet) Write a Review

Model: 1842-MB
From the Tuscany Bronze Collection
$424.00
$339.20
Selected Finish is
Selected Lever Style is
Selected Handing is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$424.00
$339.20
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

 

Specifications:

  • Backset: Adjustable 2-3/8" or 2-3/4"
  • Cross Bore: 2-1/8"
  • Door Thickness: 1-3/8" to 1-3/4"
  • Latch Faceplate: Round or Square Corner
  • Material: Brass

 

Emtek 1842 Multi Point Lock Trim (Door Config #8) - Lost Wax Cast Bronze Plates, Tuscany Style (2" x 10.5"), Non-Keyed Passage

  • Can be ordered with any Lost Wax Cast Bronze Levers (any Tuscany Bronze Levers)
  • Swinging Patio Door Hardware. Set includes Plates, Handles
  • Multi Point Mortise Lock Box not included. Trims Only
  • Each Multi Point Lock Trim now includes the Spring Assist function which returns the lever to the neutral position and eliminates sagging handles.
Manufacturer Resources

Product Specs

Subcategory:
Multi Point Lock Trim
Product Group:
Mechanical Locks
Commercial/Residential:
Residential
Product Type:
Multi Point Lock Trim
Product Subgroup:
Multi Point Lock Trim
Collection:
Tuscany Bronze
Cylinder Position:
Above Handle
Door Configuration:
#8
Electronic:
No
Keyed:
No
Lock Type:
Multi Point Trim
Ref. Door Manufacturer(s):
Neuma Doors
Series:
Tuscany
Theme:
Tuscany
Keyed Function:
Non-Keyed
Lock Function:
Passage
MAP Policy:
Yes
Product Model:
1842
(CTC) Center-to-Center:
5-1/4"
Product Function:
Non-Keyed Passage
Product Size:
2" x 10-1/2"
Cylinder Classification:
American
Product Style:
Tuscany Bronze
Product Material:
Bronze
Product Category:
Mechanical Locks
Product Substrate:
Bronze
Department:
Door Hardware

Emtek 1842-MB – Frequently Asked Questions

1) Does the Emtek 1842 multi point trim include the mortise lock body?
No. The 1842 is trim only: plates and handles. The multi point mortise lock box is not included, so you need the lock mechanism from the door manufacturer or supplier separately. Plan the order around that, because the trim alone will not operate a patio door.
2) What door thickness and backset does the Emtek 1842 trim work with?
It suits doors 1-3/8 inch to 1-3/4 inch thick, with an adjustable backset of 2-3/8 inch or 2-3/4 inch and a 2-1/8 inch cross bore. Center-to-center on the plate is 5-1/4 inches, and the plates measure 2 by 10-1/2 inches, so the stile has to be at least 2 inches wide flat face to take the plate.
3) What does Door Configuration #8 mean on Emtek multi point trim?
Door Configuration #8 describes the plate layout: on the 1842 that is a non-keyed passage set with the cylinder position above the handle. Multi point trim has to match the hole pattern in the door slab, so confirm the door was prepped for config #8 before ordering.
4) Is the Emtek 1842 keyed, and can I lock the door with it?
It is a non-keyed passage trim. There is no cylinder and no key function, so it is the inactive or interior side handle set rather than the locking side. If you need a keyed entry configuration, order the keyed version of the multi point trim instead.
5) What do I have to specify when ordering the Emtek 1842 trim?
Four choices. Finish is Flat Black Bronze (FB) or Medium Bronze (MB). Lever style is Medici (MD), Napoli (NA), Octagon (OCL) or Padua (PD). Handing is right or left. Door thickness can be entered as a note. Handing and finish are the two that cannot be corrected on site.
6) Which door brand is the Emtek 1842 config #8 trim referenced to?
Neuma Doors is the referenced door manufacturer for this configuration, so it is a common fit on Neuma swinging patio doors prepped for config #8. On any other brand, match the prep pattern, the 5-1/4 inch center-to-center and the cylinder-above-handle layout before ordering.
7) Will the 1842 trim match other Emtek Tuscany bronze hardware in the house?
Yes. The plates are lost wax cast bronze in the Tuscany Bronze collection and can be ordered with any Tuscany lost wax cast bronze lever, so the patio door reads the same as Tuscany levers and knobs elsewhere on the job in Flat Black Bronze or Medium Bronze.
8) Do the levers sag over time on this Emtek multi point set?
No. Every current Emtek multi point lock trim, including the 1842, ships with a spring assist that returns the lever to neutral and prevents the drooping handle you see on older multi point sets.
9) Is the Emtek 1842 suitable for a commercial opening or just residential?
It is a residential product, intended for swinging patio doors. For a commercial entry you want commercial grade mortise or exit hardware rather than residential multi point patio trim.
10) What cylinder type does this Emtek multi point trim use if I pair it with a keyed side?
The trim is set up for an American cylinder, positioned above the handle. The 1842 itself is non-keyed, so the cylinder goes in the keyed half of the set, and any cylinder you supply for that half must be the American standard type.
11) Is there a square corner latch faceplate option for this Emtek set?
The latch faceplate comes round corner or square corner, so it can be matched to the existing mortise pocket in the door edge without patching. Pick the one that matches the routed prep.
How fast can I get the Emtek 1842-MB delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Emtek 1842-MB come with a warranty?
Absolutely. The Emtek 1842-MB is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Emtek 1842-MB?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Emtek 1842-MB from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!