Emtek 1L1A12 Multi Point Lock Trim (Large Multi Point Entry Set) - Sandcast Bronze Plates, Arched Style (3" x 17.5"), Non-Keyed Passage
- Can be ordered with any Sandcast Bronze Levers
- Swinging Patio Door Hardware. Set includes Plates, Handles
- Multi Point Mortise Lock Box not included. Trims Only
- Each Multi Point Lock Trim now includes the Spring Assist function which returns the lever to the neutral position and eliminates sagging handles.
Manufacturer Resources
Product Specs
- Subcategory:
- Multi Point Lock Trim
- Product Group:
- Mechanical Locks
- Commercial/Residential:
- Residential
- Product Type:
- Multi Point Lock Trim
- Product Subgroup:
- Multi Point Lock Trim
- Collection:
- Sandcast Bronze
- Cylinder Position:
- Below Handle
- Door Configuration:
- Large Multi Point
- Electronic:
- No
- Keyed:
- No
- Lock Type:
- Multi Point Trim
- Ref. Door Manufacturer(s):
- G-U
- Series:
- Arched
- Theme:
- Rustic Living
- Keyed Function:
- Non-Keyed
- Lock Function:
- Passage
- MAP Policy:
- Yes
- Product Model:
- 1L1A12
- (CTC) Center-to-Center:
- 3-5/8"
- Product Function:
- Non-Keyed Passage
- Product Size:
- 3" x 17.5"
- Cylinder Classification:
- American
- Product Style:
- Arched
- Product Material:
- Bronze
- Product Category:
- Mechanical Locks
- Product Substrate:
- Bronze
- Department:
- Door Hardware
Emtek 1L1A12-FB – Frequently Asked Questions
1) Will the Emtek 1L1A12 trim fit a G-U multi point lock?
Yes, G-U is the reference door manufacturer for this trim, and it is built for the large multi point configuration with 3-5/8 inch center-to-center spacing between the handle and the cylinder hole. Match that CTC against the prep in your door before ordering.
2) Is the Emtek 1L1A12 passage set keyed, and why is there a keying option?
The 1L1A12 is a non-keyed passage function, so the handles simply operate the latch with no key cylinder in this set. The cylinder position on the plate sits below the handle and the classification is American, so if the opening needs to lock you want the keyed version of the same arched trim rather than this one.
3) Do I have to specify handing when ordering this Emtek multi point trim?
Yes, handing is a required choice, right hand or left hand. Multi point trim is handed because the lever and plate orientation follow the door swing, so getting it wrong means the set will not operate correctly on your opening.
4) How big are the plates on the Emtek arched sandcast bronze multi point trim?
Each plate measures 3 x 17.5 inches in the arched style. That is a tall backplate, so confirm your door stile is wide enough and that the existing prep or paint line will be covered before you swap trim.
5) Which lever styles can I put on the Emtek 1L1A12 arched plates?
Ten sandcast bronze levers pair with these arched plates: Aurora, Bryce, Cimarron, Cody, Durango, Lariat, Mariposa, Montrose, Teton and Yuma. Lever choice is required at order time, and any Sandcast Bronze lever works with the set.
6) Will these levers sag over time like older multi point handles?
No. Emtek's current multi point lock trim includes a spring assist that returns the lever to neutral, which is what prevents the drooping handle you see on older patio door sets.
7) Is the Emtek 1L1A12 suitable for a commercial entrance?
It is a residential product, intended for swinging patio doors in homes. For a commercial or institutional opening that needs a graded, code-rated entry device, this sandcast bronze patio trim is not the right choice.
8) What finishes does the Emtek 1L1A12 sandcast bronze trim come in?
Three: Flat Black Bronze (FB), Medium Bronze (MB) and Tumbled White Bronze (TWB). All are part of Emtek's Sandcast Bronze collection, so they will match other sandcast bronze levers, knobs and accessories on the rest of the house in the same finish code.
9) Do I need to give a door thickness when I order the Emtek 1L1A12?
There is an optional door thickness entry on the order. Supplying it is worth doing on a non-standard slab, since the spindle and mounting length on multi point trim has to reach through the door to the gearbox.
10) Is the Emtek 1L1A12 an electronic or smart lock?
No, it is purely mechanical trim in cast bronze, with no electronics, no motor and no wiring. Lever operation only.
How fast can I get the Emtek 1L1A12-FB delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Emtek 1L1A12-FB come with a warranty?
Absolutely. The Emtek 1L1A12-FB is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Emtek 1L1A12-FB?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Emtek 1L1A12-FB from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.