Emtek 1L1M24 Multi Point Lock Trim (Large Multi Point Entry Set) - Brass Plates, Melrose Style (2.9" x 17.5"), Non-Keyed Fixed Handle Outside, Operating Handle Inside (for Semi-Active Door)
- Can be ordered with any Brass Levers
- Swinging Patio Door Hardware. Set includes Plates, Handles
- Multi Point Mortise Lock Box not included. Trims Only
- Each Multi Point Lock Trim now includes the Spring Assist function which returns the lever to the neutral position and eliminates sagging handles.
Manufacturer Resources
Product Specs
- Subcategory:
- Multi Point Lock Trim
- Product Group:
- Mechanical Locks
- Commercial/Residential:
- Residential
- Product Type:
- Multi Point Lock Trim
- Product Subgroup:
- Multi Point Lock Trim
- Collection:
- Brass
- Cylinder Position:
- Above Handle
- Door Configuration:
- Large Multi Point
- Electronic:
- No
- Keyed:
- No
- Lock Type:
- Multi Point Trim
- Ref. Door Manufacturer(s):
- G-U
- Series:
- Melrose
- Theme:
- Contemporary
- MAP Policy:
- Yes
- Product Model:
- 1L1M24
- (CTC) Center-to-Center:
- 3-5/8"
- Product Function:
- Non-Keyed Fixed Handle Outside, Operating Handle Inside
- Product Size:
- 2.9" x 17.5"
- Cylinder Classification:
- American
- Product Style:
- Melrose
- Product Material:
- Brass
- Product Category:
- Mechanical Locks
- Product Substrate:
- Brass
- Department:
- Door Hardware
Emtek 1L1M24-US19 – Frequently Asked Questions
1) Does the Emtek 1L1M24 Melrose entry set include the multi point lock itself?
No. The 1L1M24 is trim only, plates and handles. The multi point mortise lock box is a separate purchase, so you need the gearbox and rods already in the door or ordered alongside it.
2) Why is the Emtek 1L1M24 described as being for a semi-active door, and can I use it on the main entry leaf?
It has a fixed, non-keyed handle outside and an operating lever inside. That is the inactive or semi-active leaf of a pair of swinging patio doors, the one you normally leave shut and only open from inside. For the active leaf you want a keyed set with an operating handle outside, because this one will not let you key in or retract the latch from the exterior.
3) What center-to-center spacing does the Emtek Melrose multi point trim use, and will it line up with my existing door prep?
Spacing is 3-5/8 inches center to center, with the cylinder position above the handle. The plates measure 2.9 by 17.5 inches. Match those against the prep in the door slab before ordering, since multi point preps vary by door maker.
4) Which door manufacturer's multi point system is the Emtek 1L1M24 trim referenced to?
G-U is the referenced multi point system for this Large Multi Point configuration. If your door carries a G-U gearbox, the trim is the right family to be looking at.
5) Do I have to specify handing when ordering the Emtek 1L1M24?
Yes, handing is a required choice, right hand or left hand. Lever style is also required, and there is a free text field for your door thickness so the spindle and screw pack suit the slab.
6) What lever styles can I put on the Emtek Melrose multi point trim?
Any Emtek brass lever. The selection runs from the L-Square, T-Bar and R-Bar bar levers in Faceted, Hammered, Knurled, Tribeca, Straight Knurled and White Marble, through Athena, Helios, Hermes, Luzern, Poseidon, Stuttgart, Argos, Aston, Basel, Breslin, Dumont, Freestone, Geneva, Hercules, Mercury, Myles, Sion, Spencer and Triton, to Cortina, Manning, Milano, Merrimack, Turino, Coventry, Elan, Ribbon and Reed, Rope, Rustic, Santa Fe, Wembley, Arts and Crafts and Hammered. Handy if you are matching interior levers already installed elsewhere in the house.
7) Will the inside lever on this Emtek patio door trim sag over time?
Emtek builds a spring assist into the multi point trim. It returns the lever to neutral and is there specifically to stop the droop you get on long handle sets.
8) Can I add a keyed cylinder to the Emtek 1L1M24 later?
The 1L1M24 is a non-keyed configuration, so it is not the trim to buy if you need key access from outside. Cylinder classification for the Melrose multi point family is American, positioned above the handle, so a keyed sibling in the same series is what you would order for the active leaf.
9) What finishes does the Emtek 1L1M24 Melrose entry trim come in?
Nine: Oil Rubbed Bronze US10B, Lifetime Polished Nickel US14, Satin Nickel US15, Pewter US15A, Flat Black US19, Polished Chrome US26, Lifetime Polished Brass US3, Unlacquered Brass US3NL, and French Antique US7. Unlacquered brass will patina with handling, the rest hold their look.
10) Is the Emtek Melrose multi point trim solid brass, and is it rated for commercial openings?
Plates and substrate are brass, part of Emtek's Brass collection, styled contemporary. It is a residential product, so for a commercial entrance with traffic and code requirements you want a Grade 1 commercial set instead.
How fast can I get the Emtek 1L1M24-US19 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Emtek 1L1M24-US19 come with a warranty?
Absolutely. The Emtek 1L1M24-US19 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Emtek 1L1M24-US19?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Emtek 1L1M24-US19 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.