Emtek 2411 Sandcast Bronze Doorbell with Plate and Button with #1 Rosette
Supplied with matching screws and lighted buttons. Screws are NOT sold separately.
Product Codes:
American Classic
- with Regular Rosette - 2400
- with Oval Rosette - 2402
- with Rectangular Rosette - 2403
- with #8 Rosette - 2408
- with Quincy Rosette - 2409
- with Watford Rosette - 2466
- with Wilshire Rosette - 2404
American Designer
- with Rope Rosette - 2401
- with Lancaster Rosette - 2406
- with Ribbon and Reed Rosette - 2407
Arts and Crafts:
- with Arts and Craft Rosette - 2451
- with Hammered Rosette - 2452
Contemporary:
- with Modern Rosette - 2457
- with Disk Rosette - 2458
- with Square Rosette - 2459
- with Neos Rosette - 2460
- with Modern Rectangular Rosette - 2463
- with Urban Modern Rosette - 2465
STRETTO:
- with 1-1/2" x 5" Rosette STRETTO Plate - 2440
- with 1-1/2" x 11" Rosette STRETTO Plate - 2441
Sandcast Bronze:
- with Sandcast Bronze #1 Rosette - 2421
- with Sandcast Bronze #2 Rosette - 2422
- with Sandcast Bronze #3 Rosette - 2423
- with Sandcast Bronze #4 Rosette - 2424
- with Sandcast Bronze #6 Rosette - 2425
Tuscany (Lost Wax Cast Bronze):
- with #11 Rosette - 2411
- with #12 Rosette - 2412
- with #14 Rosette - 2414
- with #15 Rosette - 2415
Wrought Steel:
- with Wrought Steel #1 rosette - 2431
- with Wrought Steel #2 rosette - 2432
- with Wrought Steel #3 rosette - 2433
Specifications:
- Material: Brass
- Button: Lighted
- Includes: Matching screws
Manufacturer Resources
Product Specs
- Subcategory:
- Doorbell Buttons
- Collection:
- Sandcast Bronze
- Product Type:
- Doorbell Buttons
- Product Group:
- Door Trim and Accessories
- Product Subgroup:
- Doorbell Buttons
- Commercial/Residential:
- Residential
- Series:
- Sandcast Bronze
- Theme:
- Rustic Living
- Electronic:
- Yes
- MAP Policy:
- Yes
- Product Model:
- 2421
- Product Style:
- Sandcast Bronze
- Product Material:
- Bronze
- Product Category:
- Door Trim and Accessories
- Product Substrate:
- Bronze
- Department:
- Door Hardware
Emtek 2421-FB – Frequently Asked Questions
1) Is the Emtek 2421 doorbell button lighted, and does it need power run to it?
The button is lighted, which means it draws from the doorbell transformer circuit like any standard low voltage chime button. It is an electronic device rather than a purely mechanical plate, so it wires into an existing bell circuit at the door.
2) What finishes does the Emtek 2421 sandcast bronze doorbell come in?
Three: Flat Black Bronze (FB), Medium Bronze (MB), and Tumbled White Bronze (TWB). Order them as 2421FB, 2421MB, and 2421TWB. These are living bronze finishes on a sandcast body, so if you're matching entry sets or handlesets already on the house, pick the same finish code rather than eyeballing the color.
3) Is the Emtek 2421 doorbell rated for a commercial building entrance?
It's a residential product. For an apartment building lobby, an office entry, or anything on a code-governed commercial opening, this isn't the right call. Property managers doing single family or townhome units are the fit here.
4) What is the difference between the Emtek 2421 and the other Sandcast Bronze doorbell models?
Only the rosette shape. The Sandcast Bronze doorbells run 2421 through 2425, all the same lighted button and plate assembly: 2421 uses the #1 rosette, 2422 the #2, 2423 the #3, 2424 the #4, and 2425 the #6. Pick the rosette that matches the knob or lever rosettes already on the house.
5) I want a bronze Emtek doorbell but not a sandcast one. What else does Emtek make?
Tuscany is the other bronze family, and it's lost wax cast rather than sandcast, so the surface reads smoother and more refined. Those run 2411 with the #11 rosette, 2412 with #12, 2414 with #14, and 2415 with #15. If you want a forged, darker look instead, Emtek's Wrought Steel doorbells are 2431, 2432, and 2433. Sandcast bronze is the choice when you want visible casting texture and a rustic entry.
6) Can I replace an existing doorbell button with the Emtek 2421 without redoing the wiring?
The 2421 is a low voltage lighted push button on a bronze plate and lands on the same two bell wires a standard chime button uses. What decides the swap is the plate footprint over the old cutout or paint line, not the wiring. Measure what's on the jamb before you commit, because the sandcast plate and #1 rosette won't necessarily cover a larger existing escutcheon.
7) What is the Emtek 2421 doorbell plate actually made of?
Bronze, sandcast. That casting method leaves the mottled, slightly irregular surface you see on the plate and rosette, which is why the finishes are named the way they are (Flat Black, Medium, Tumbled White). Bronze holds up outdoors and darkens over time in the exposed areas, which is the intended look on a rustic entry.
How fast can I get the Emtek 2421-FB delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Emtek 2421-FB come with a warranty?
Absolutely. The Emtek 2421-FB is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Emtek 2421-FB?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Emtek 2421-FB from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.