Emtek 2411 Tuscany Bronze Doorbell with Plate and Button with #11 Rosette - Lost Wax Cast Bronze
Supplied with matching screws and lighted buttons. Screws are NOT sold separately.
Product Codes:
American Classic
- with Regular Rosette - 2400
- with Oval Rosette - 2402
- with Rectangular Rosette - 2403
- with #8 Rosette - 2408
- with Quincy Rosette - 2409
- with Watford Rosette - 2466
- with Wilshire Rosette - 2404
American Designer
- with Rope Rosette - 2401
- with Lancaster Rosette - 2406
- with Ribbon and Reed Rosette - 2407
Arts and Crafts:
- with Arts and Craft Rosette - 2451
- with Hammered Rosette - 2452
Contemporary:
- with Modern Rosette* - 2457
- with Disk Rosette - 2458
- with Square Rosette - 2459
- with Neos Rosette* - 2460
- with Modern Rectangular Rosette - 2463
- with Urban Modern Rosette - 2465
STRETTO:
- with 1-1/2" x 5" Rosette STRETTO Plate - 2440
- with 1-1/2" x 11" Rosette STRETTO Plate - 2441
Sandcast Bronze:
- with Sandcast Bronze #1 Rosette - 2421
- with Sandcast Bronze #2 Rosette - 2422
- with Sandcast Bronze #3 Rosette - 2423
- with Sandcast Bronze #4 Rosette - 2424
- with Sandcast Bronze #6 Rosette - 2425
Tuscany (Lost Wax Cast Bronze):
- with #11 Rosette - 2411
- with #12 Rosette - 2412
- with #14 Rosette - 2414
- with #15 Rosette - 2415
Wrought Steel:
- with Wrought Steel #1 rosette - 2431
- with Wrought Steel #2 rosette - 2432
- with Wrought Steel #3 rosette - 2433
Specifications:
- Material: Brass
- Button: Lighted
- Includes: Matching screws
Manufacturer Resources
Product Specs
- Subcategory:
- Doorbell Buttons
- Collection:
- Tuscany Bronze
- Product Type:
- Doorbell Buttons
- Product Group:
- Door Trim and Accessories
- Product Subgroup:
- Doorbell Buttons
- Commercial/Residential:
- Residential
- Series:
- Tuscany
- Theme:
- Tuscany
- Electronic:
- Yes
- MAP Policy:
- Yes
- Product Model:
- 2411
- Product Style:
- Tuscany Bronze
- Product Material:
- Bronze
- Product Category:
- Door Trim and Accessories
- Product Substrate:
- Bronze
- Department:
- Door Hardware
Emtek 2411-FB – Frequently Asked Questions
1) Is the Emtek 2411 doorbell a wired button or does it have its own chime?
It's a lighted push button and plate only, wired into an existing bell or chime circuit. There's no chime, transformer, or receiver in the box. If you're replacing a button on a working doorbell system, this drops onto that low voltage wiring; if you're starting from nothing, you still need the chime and transformer.
2) What finishes does the Emtek 2411 Tuscany bronze doorbell button come in?
Two: Flat Black Bronze (FB) and Medium Bronze (MB), ordered as 2411FB and 2411MB. Both are lost wax cast bronze, so if you're matching entry sets, hinges, or door knockers on the same opening, match to the Tuscany bronze finish family rather than to a plated brass finish, which will read differently in daylight.
3) I want a different rosette shape than the #11 in the same Tuscany bronze. What are my options?
Tuscany lost wax cast bronze doorbells come in four rosettes: #11 (2411), #12 (2412), #14 (2414), and #15 (2415). Same button and construction across all four, so the choice is purely the shape of the plate at the door. If you want a longer plate instead of a rosette, the STRETTO plates are 1-1/2 x 5 inches (2440) and 1-1/2 x 11 inches (2441).
4) Is the Emtek Tuscany bronze doorbell suitable for a commercial building entrance or an apartment complex?
Emtek lists the 2411 as residential. It's a cast bronze decorative button for a house or a townhome entry, not a graded commercial device. For a multi-family or commercial entrance where the button takes constant traffic and needs to meet a facility spec, look at a commercial-rated push button instead of a decorative cast bronze plate.
5) What is the Emtek 2411 doorbell plate actually made of, and will it hold up outdoors?
Solid bronze, lost wax cast, in either Flat Black Bronze or Medium Bronze. Cast bronze is a living finish outdoors: it darkens and develops patina with exposure and handling rather than staying uniform, which is the point of the Tuscany line. If you want a finish that stays exactly as shipped, bronze isn't the material to pick.
6) I have an Emtek doorbell already but a different collection. Can I mix a Tuscany button with American Classic hardware?
Nothing stops it mechanically, but the collections are different castings and different finish families. Emtek's doorbell plates run across American Classic (2400, 2402, 2403, 2408, 2409, 2466, 2404), American Designer (2401, 2406, 2407), Arts and Crafts (2451, 2452), Contemporary (2457 through 2465), Sandcast Bronze (2421 to 2425), Tuscany (2411, 2412, 2414, 2415), and Wrought Steel (2431, 2432, 2433). If the rest of the entry is a bronze collection, stay in bronze; if it's a plated brass or nickel collection, the Tuscany bronze won't match it.
How fast can I get the Emtek 2411-FB delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Emtek 2411-FB come with a warranty?
Absolutely. The Emtek 2411-FB is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Emtek 2411-FB?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Emtek 2411-FB from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.