Emtek 4143 STRETTO Narrow Trim Lockset, 1-1/2" x 11" Arched Non-Keyed, Brass Tubular, Passage
- Can be ordered with any Brass Knob or Lever
- Sold as complete set. Includes Latch and Strike Plate
- Narrow 1-1/4" Door Preps, 3-3/8" C-to-C Hole Spacing
- Supplied with 28 Degree Latch
- Standard backset is 2-3/8" backset. Specify 2-3/4" backset if required.
- Handing required for Leverset
Specifications:
- Backset: Adjustable 2-3/8" or 2-3/4"
- Cross Bore: 2-1/8"
- Door Thickness: 1-3/8" to 1-3/4"
- Latch Faceplate: Round or Square Corner
- Material: Brass
Manufacturer Resources
Product Specs
- Subcategory:
- Single Point Locksets
- Product Type:
- Narrow Trim Locksets
- Product Group:
- Mechanical Locks
- Product Subgroup:
- Bored Locksets
- Commercial/Residential:
- Residential
- Lock Type:
- Tubular
- Keyed:
- No
- Keyed Function:
- Non-Keyed
- Collection:
- Brass
- Series:
- STRETTO Arched
- Theme:
- American Classic
- Electronic:
- No
- Lock Function:
- Passage
- MAP Policy:
- Yes
- Product Model:
- 4143
- Product Function:
- Passage
- Product Size:
- 1-1/2" x 11"
- Product Style:
- STRETTO
- Product Material:
- Brass
- Product Category:
- Mechanical Locks
- Product Substrate:
- Brass
- Department:
- Door Hardware
Emtek 4143-FB – Frequently Asked Questions
1) Will the Emtek 4143 STRETTO narrow trim lockset fit a narrow stile door or a door with a narrow rail?
That is what the 4143 is built for. The arched STRETTO plate measures 1-1/2" x 11" and the door prep is a narrow 1-1/4" bore with 3-3/8" center-to-center hole spacing, so it works where a standard 2-1/8" cross bore would blow out the stile. Note the spec sheet also lists a 2-1/8" cross bore for the tubular latch prep, so read the prep template before boring.
2) What backset does the Emtek 4143 passage set come with, and can I use it on a 2-3/4 inch backset door?
Both backsets are covered. The latch is adjustable for 2-3/8" or 2-3/4", and backset is a required selection when you order. Standard is 2-3/8"; specify 2-3/4" if your existing bore is set back further. Those are the two common residential backsets, so an existing prep will almost always match one of them.
3) Does the Emtek 4143 lock, or is it just a passage set?
Passage only. The 4143 is non-keyed with no cylinder and no privacy button, so the knob or lever simply retracts the latch and the door stays closed against the strike. Use it on hallways, closets, and pantry doors. For a bedroom or bath you need a privacy function instead, and for an exterior door a keyed set.
4) Do I have to specify handing on the Emtek 4143 STRETTO set?
Yes, handing is a required selection, right hand or left hand. Emtek calls for handing on leversets because the lever has to swing down toward the latch side. Stand outside the door: if the hinges are on your right it is right hand. Pick the knob or lever style and the handing together, since the trim plate ships assembled to that hand.
5) What comes in the box with the Emtek 4143 narrow trim passage set?
It ships as a complete set: both trim plates, the tubular latch, and the strike plate. The latch is a 28 degree unit and the faceplate is available round corner or square corner to match the existing mortise in the door edge. You still choose the knob or lever style separately, since the 4143 plate accepts any Emtek brass knob or lever.
6) Can I mix knob and lever styles on the Emtek 4143 STRETTO plate?
The 4143 accepts any Emtek brass knob or lever, and you pick the inside trim style when ordering. Choices run ten levers (Aurora, Bryce, Cimarron, Cody, Durango, Lariat, Mariposa, Montrose, Teton, Yuma) and fifteen knobs including Butte, Egg, Round, Winchester, Bristol, Hampton, Lowell, Windsor, Astoria, Diamond, Georgetown, Modern Disc, Modern Square, Old Town and Providence. Remember that a lever choice brings handing into play; a knob is symmetric.
7) Is the Emtek 4143 STRETTO lockset suitable for a commercial office or apartment corridor?
Emtek lists the 4143 as residential hardware. It is a tubular passage set in brass, sized for interior doors in homes and light residential settings, including high-end multi-family unit interiors. For a commercial corridor or anything on a fire-rated or high-traffic opening, spec a commercial-grade cylindrical or mortise lock instead.
8) What finishes does the Emtek 4143 STRETTO arched lockset come in?
Three: Flat Black, Medium Bronze, and Tumbled White Bronze. All three are on solid brass trim, so the finish wears into the base metal rather than off a plated shell. If you are matching other openings in the house, the same finish codes carry across Emtek's brass collection knobs and levers.
How fast can I get the Emtek 4143-FB delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Emtek 4143-FB come with a warranty?
Absolutely. The Emtek 4143-FB is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Emtek 4143-FB?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Emtek 4143-FB from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.