Emtek 5241 STRETTO Narrow Trim Lockset, 2" x 10" Rectangular Non-Keyed, Brass Tubular, Privacy
- Can be ordered with any Brass Knob or Lever
- Sold as complete set. Includes Latch and Strike Plate
- Narrow 1-1/4" Door Preps, 3-3/8" C-to-C Hole Spacing
- Supplied with 28 Degree Latch
- Standard backset is 2-3/8" backset. Specify 2-3/4" backset if required.
- Handing required for Leverset
Specifications:
- Backset: Adjustable 2-3/8" or 2-3/4"
- Cross Bore: 2-1/8"
- Door Thickness: 1-3/8" to 1-3/4"
- Latch Faceplate: Round or Square Corner
- Material: Brass
Manufacturer Resources
Product Specs
- Subcategory:
- Single Point Locksets
- Product Type:
- Narrow Trim Locksets
- Product Group:
- Mechanical Locks
- Product Subgroup:
- Bored Locksets
- Commercial/Residential:
- Residential
- Lock Type:
- Tubular
- Keyed:
- No
- Keyed Function:
- Non-Keyed
- Lock Function:
- Privacy/Bed/Bath
- Collection:
- Brass
- Series:
- STRETTO Rectangular
- Theme:
- Contemporary
- Electronic:
- No
- MAP Policy:
- Yes
- Product Model:
- 5241
- Product Function:
- Privacy/Bed/Bath
- Product Size:
- 2" x 10"
- Product Shape:
- Rectangular
- Product Style:
- STRETTO
- Product Material:
- Brass
- Product Category:
- Mechanical Locks
- Product Substrate:
- Brass
- Department:
- Door Hardware
Emtek 5241-FB – Frequently Asked Questions
1) Will the Emtek 5241 STRETTO privacy set fit a narrow stile door or a door with a narrow rail?
That is exactly what the 5241 is built for. The STRETTO rectangular trim measures 2 x 10 inches and uses a narrow 1-1/4 inch door prep with 3-3/8 inch center-to-center hole spacing, so it works where a standard 2-1/8 inch cross bore rosette would run off the edge of the stile. Note the latch itself still takes a 2-1/8 inch cross bore, so confirm your door can take that bore within the narrow prep.
2) What backset does the Emtek 5241 come with, and can I use it on a 2-3/4 inch backset door?
The latch is adjustable for both 2-3/8 and 2-3/4 inch backsets, the two standard bored-lock backsets. Standard shipping configuration is 2-3/8 inches, so specify 2-3/4 inches on the order if that is what your door is bored for.
3) Does the Emtek 5241 lock with a key, or is it a bed and bath privacy function?
It is a non-keyed privacy function, the standard bedroom and bathroom setup: thumbturn or push button inside, emergency release outside. There is no cylinder and no key. If you need key control on that opening, you want a keyed entry lockset instead, not the 5241.
4) Do I have to specify handing when ordering an Emtek STRETTO 5241?
Handing is required on every order, right hand or left hand. It matters for levers in particular, since the lever has to point the correct direction on the door. Knob configurations still go through the same required handing selection, so determine the swing before ordering.
5) What do I need to order besides the Emtek 5241 trim to complete the door?
The 5241 ships as a complete set with the latch and strike plate included, so no separate latch purchase. What you do have to choose is the knob or lever style for the inside trim, the handing, the backset, and the door thickness range. The knob and lever selection spans 10 lever designs including Aurora, Durango and Teton, and 15 knob designs including Butte, Egg, Round and Windsor.
6) Will the Emtek 5241 latch drop into my existing bored door, or do I need to redrill?
Only if your door already has the narrow prep. The 5241 needs 1-1/4 inch preps at 3-3/8 inch hole spacing along with a 2-1/8 inch cross bore, which is not the same layout as a standard round rosette knob set. A door bored for a conventional 2-1/8 inch single bore will need the additional narrow-trim prep drilled. The latch is a 28 degree latch and comes with the strike, and the faceplate is available round corner or square corner to match your existing mortise in the edge of the door.
7) Is the Emtek 5241 rated for commercial use in an office or apartment corridor?
No. The 5241 STRETTO is a residential lockset, a brass tubular bored lock for bedroom and bath doors. For a commercial opening with real traffic, look at a cylindrical or mortise lock built for that duty rather than this trim set.
8) What finishes does the Emtek 5241 STRETTO rectangular privacy set come in?
Three finishes: Flat Black, Medium Bronze, and Tumbled White Bronze. All three are on solid brass trim, so if you are matching other Emtek brass-collection hardware across a house or a unit turn, the substrate is consistent.
9) Does the Emtek STRETTO rectangular trim suit a modern interior, and can I mix knob and lever styles?
The STRETTO rectangular plate is a contemporary shape, 2 by 10 inches, and it accepts any brass knob or lever in the line. That means you can run the same rectangular backplate through a project and vary the grip, for instance Modern Square knobs on closets and Teton levers on bedrooms, with the trim reading the same on every door.
How fast can I get the Emtek 5241-FB delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Emtek 5241-FB come with a warranty?
Absolutely. The Emtek 5241-FB is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Emtek 5241-FB?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Emtek 5241-FB from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.