Emtek 6202 Tuscany #16 8-1/4" Non-Keyed Sideplate Lockset, Privacy - Lost Wax Cast Bronze Tubular

Yes. The 6202 Tuscany privacy set uses one standard 2-1/8 inch cross bore, so it drops into a door already prepped for a common bored lockset. Door thickness range is 1-3/8 to 1-3/4 inches, which covers both standard interior doors and thicker solid-core doors. The one thing that is not automatic is the sideplate itself: the plate is 8-1/4 inches, so you need that much flat face on the door, and the sideplate footprint will need to be mortised in even where the 2-1/8 inch bore is already there.

Both. The latch is adjustable between 2-3/8 and 2-3/4 inches, and backset is a required choice when you order. The standard latch ships set for 2-3/8 inch, so if your existing bore is centered 2-3/4 inches off the door edge, specify that. Measure from the door edge to the center of the 2-1/8 inch bore before you order.

No, and that is the point of it. The 6202 is a privacy function set, the bed and bath type: it locks from inside the room with a thumbturn or button and has an emergency release outside, with no cylinder and no key. If you need a keyed opening, an exterior door or an office, this is the wrong function and you want a keyed entry set instead.

Handing is a required selection, right hand or left hand, and it matters for levers in particular. Stand outside the door: if the hinges are on your right it is right hand, hinges on the left it is left hand. Knobs are symmetrical in use, but the order still asks for a hand, so get it off the actual opening rather than guessing.

The Emtek 6202 Tuscany 8-1/4" sideplate lockset is a Privacy/Bed/Bath function and is non-keyed, so it is meant for bedroom and bath doors that only need an interior privacy lock. For an opening that has to accept a key from outside, the Omnia D12036A is a single cylinder deadbolt lever lockset in solid brass. That is the function change to make: single cylinder means keyed outside, thumbturn inside.

No. The Emtek 6202 Tuscany sideplate lockset is a Privacy/Bed/Bath tubular lockset and ships as a complete working set with knob or lever, latch and strike plate, so it needs a bored door with a 2-1/8" cross bore and a latch edge prep. For an inactive leaf, a closet door or one half of a pair where the trim is only there to be pulled, the Omnia D12036PD is a double dummy sideplate lever lockset with plates on a 5-1/2" center to center. Double dummy has no latch and no moving lock mechanism - it surface mounts as trim only.

It is a complete set: knob or lever, latch, and strike plate all ship together. You pick the trim style as part of the order rather than buying it separately, and there are 16 choices, including the Medici, Napoli, Octagon and Padua levers, and Octagon, Parma, Petal, Diamond, Georgetown, Old Town, Bristol, Hampton, Lowell and Windsor knobs, plus Ebony and Ice White porcelain knobs. Nothing else is required to hang it on a prepped door.

Yes. It is part of Emtek's Tuscany bronze collection and can be ordered with any lost wax cast bronze knob or lever style, so the privacy sets on bedrooms and baths can carry the same trim as the rest of the openings. Finish comes in Flat Black Bronze (FB) or Medium Bronze (MB). Cast bronze is a living finish, so pieces bought at different times will not be identical out of the box, but they age toward each other.

It is a residential product. The 6202 is a tubular bronze privacy set built for houses, apartments and interior bedroom and bath doors. On a commercial project where the spec calls for a graded cylindrical or mortise lock, this is not the part to submit.

The Emtek 6202 Tuscany is privacy only, no cylinder and no deadbolt. For a sideplate style lever set with a deadbolt, Omnia's D12036 family covers it: the D12036A is single cylinder, the D12036AC is double cylinder for a door with glass nearby, and the D12036PD is a double dummy on 5-1/2 inch centers for the inactive leaf of a pair or a closet door that only needs to look the part.

No - they are not interchangeable on a bathroom door. The Omnia D12036PD is a double dummy lever lockset, which is fixed trim with no latching or locking action, so the door will not stay closed and will not lock. The Emtek 6202 Tuscany sideplate lockset is the Privacy/Bed/Bath function, which is the one that gives you a push-button or turn lock inside the bath and a latch that holds the door shut. If the door needs to close and privacy lock, the dummy is not a substitute at any price.

Both corner styles are covered, round corner or square corner, which is what lets the latch drop into an existing mortise on the door edge without recutting it. Look at what is in the door now: routed pockets from a template usually take the round corner, chiseled pockets on older doors are typically square. The strike plate ships with the set.

The Emtek 6202 Tuscany sideplate lockset requires handing when it is ordered with a lever, along with a backset of 2-3/8" or 2-3/4" and the inside knob or lever style. The Omnia D12036A single cylinder, D12036AC double cylinder and D12036PD double dummy are lever locksets as well, so plan on confirming hand on those the same way. Walk the doors and record swing direction before the order goes in - a left hand lever on a right hand door is a return, not an adjustment.