Emtek 6752 Tuscany #16 10-1/8" Non-Keyed Sideplate Lockset, Dummy (Pair) - Lost Wax Cast Bronze Tubular

Dummy function, so there is no latch action and no turning mechanism. The 6752 Tuscany sideplate set is fixed trim, sold as a pair, for doors that don't latch: closet pairs, French door inactive leaves, or a leaf held by a roller catch or ball catch you supply separately. If you need the door to stay shut on its own, you want a passage or privacy set instead.

1-3/8 to 1-3/4 inch doors, which covers standard residential interior slabs at 1-3/8 and the heavier 1-3/4 inch doors. There is a door thickness field on the order form, so if your doors fall outside that or you are working a mixed-thickness building, state the actual thickness when you order.

No boring for the dummy version. The 6752 is listed as surface mount with no door prep required, so it screws to the face of an existing slab. That matters on a retrofit: you are not committed to a 2-1/8 inch cross bore the way you are with the functioning sideplate sets in the Tuscany family, which use one standard 2-1/8 inch door prep.

Yes, right hand or left hand is a required choice, and Emtek calls handing out specifically for leversets. Stand outside the door, on the side it swings away from: hinges on your right is right hand. Get it wrong on a lever and the lever points up instead of down. Knob styles are symmetrical, but you still pick a hand at order time.

It's a residential-rated line. Emtek classes the Tuscany sideplate as residential, so for corridor doors, stairwells, or anything on a fire-rated or high-cycle opening in a commercial or multi-family property, this is the wrong part. It fits residential interiors: single-family, condo unit interiors, model homes, boutique hospitality. For the back-of-house openings, spec a commercial cylindrical or mortise lock instead.

2-3/8 inch is the standard latch. If your existing bore is on a 2-3/4 inch backset, which is common on exterior and thicker doors, you have to specify 2-3/4 at order time. Measure from the door edge to the center of the bore before you order, because a 2-3/8 latch will not reach a 2-3/4 prep.

The Omnia D12036PD is a solid brass dummy deadbolt lever lockset with plates on 5-1/2 inch center to center spacing, and its function is double dummy. The Emtek 6752 Tuscany is also a dummy function set, sold as a pair of non-keyed sideplates in a 10-1/8 inch size, ordered with a Lost Wax Cast Bronze knob or lever. The two differ in plate length and in the center to center dimension published for the Omnia, so match whichever spacing the door prep or the existing trim already carries.

The Emtek 6752 Tuscany is a dummy function set and is non-keyed, so it has no latch action to secure an opening. For a keyed opening, the Omnia D12036A is a single cylinder deadbolt lever lockset in solid brass, and the Omnia D12036AC is a double cylinder deadbolt lever lockset in solid brass with a sideplate design. Single cylinder takes a key outside and a thumbturn inside; double cylinder takes a key on both faces, which is the choice for glass front and sidelight openings where an inside turn could be reached.

The 6752 Tuscany #16 plate measures 10-1/8 inches. That is a tall backplate, so it hides a lot of what a previous rose or smaller escutcheon left behind on the stile, but it also needs a stile wide enough to take the plate without running into the door edge or a glass panel. Measure the flat face of your stile before committing on a French or glass door.

Sixteen styles, all in the Lost Wax Cast Bronze line: Medici, Napoli, Octagon and Padua levers, and Octagon, Parma, Petal, Diamond, Georgetown, Old Town, Bristol, Hampton, Lowell and Windsor knobs, plus Ebony and Ice White porcelain knobs. You choose one when you order, and it is a required selection, so the plate and the trim ship together as a set.

Two: Flat Black Bronze (FB) and Medium Bronze (MB). Both are cast bronze, not plated, so they are living finishes that will darken and wear through at contact points over time. If you are matching openings already done in Tuscany bronze in the same building, order the same finish code rather than eyeballing it.

It ships as a complete set with the knob or lever, latch and strike plate included. On the dummy pair that means both sides come in one box; you don't order the trim separately. What is not included is any catch to hold an inactive leaf closed, which you buy on its own.

Both are dummy sideplate trim, but they are different pieces. The Emtek 6752 is cast bronze at 10-1/8 inches with sixteen knob and lever styles to choose from and a required hand. The Omnia D12036PD is solid brass, double dummy, built around a 5-1/2 inch center to center layout. Pick on material and plate size: bronze that patinas versus brass, and a taller plate versus the Omnia's stated spacing.

It's part of the Tuscany Bronze collection and takes the same Lost Wax Cast Bronze knobs and levers as the rest of the family, so a dummy pair on a closet will read the same as the passage and privacy openings down the hall as long as you order the matching finish code and the same trim style. That's the usual reason to run sideplates: one plate profile across every door in the plan.

The Omnia D12036A is a single cylinder deadbolt lever lockset in solid brass, and the Omnia D12036AC is a double cylinder deadbolt lever lockset in solid brass with a sideplate design. Both carry the same D12036 base, so the plate family stays consistent across a run of doors while the cylinder count changes by opening. Where a door needs trim only and no locking at all, the matching dummy in that family is the Omnia D12036PD, a double dummy on 5-1/2 inch center to center.

The Omnia D12036PD is a solid brass dummy deadbolt lever lockset with plates. The Emtek 6752 Tuscany is bronze, in the Tuscany Bronze collection, and comes in Flat Black Bronze (FB) and Medium Bronze (MB). If the other doors in the run are cast bronze and the finish has to match, the 6752 is the set built in that material; the Omnia is the brass-bodied alternative in the same dummy function.