You may also like
Hangermate 1/4 X 1 Vertical Wood Rod (Jar 25)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Jar
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Screws
Metallics JPFMWV2251050 – Frequently Asked Questions
1) What size rod does the Metallics JPFMWV2251050 Hangermate accept?
It takes 1/4 inch threaded rod. The Hangermate body is a 1/4 inch female threaded insert on a 1 inch wood screw point, so you thread 1/4-20 rod or a 1/4 inch hanger stud straight into it after driving.
2) Can I use this Hangermate screw in steel or concrete, or is it wood only?
Wood only. The JPFMWV2251050 is the wood version, with a 1 inch wood screw point meant for joists, blocking, or timber framing. For steel deck, bar joist, or concrete you need the steel or concrete style Hangermate instead, not this one.
3) What does the vertical Hangermate mean, and will it work for a horizontal pull?
Vertical means the insert is designed to carry load hanging straight down from the fastener, which is how you support conduit, strut, sprinkler branch lines, or pipe from a wood joist overhead. It's not a sidewall or angled application fitting, so if your rod leaves the structure at an angle, use a horizontal or angle style Hangermate.
4) Do I need anything besides the Hangermate to hang conduit from a wood joist?
The fastener itself only gets you the anchor point. You still supply the 1/4 inch threaded rod cut to drop length, plus whatever the pipe or conduit sits in at the bottom, a clevis hanger, strut and strut clamp, or a conduit hanger with a 1/4 inch rod tap. None of that is in the jar of 25.
5) Can the Metallics Hangermate wood screw be driven with a standard impact driver?
Yes. Hangermate wood style inserts are driven with a hex driver in a drill or impact driver, straight into the wood member with no pre-drilling required in most softwood framing. Set it so the threaded body seats flush against the wood face before you thread the 1/4 inch rod in.
How fast can I get the Metallics JPFMWV2251050 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JPFMWV2251050 come with a warranty?
Absolutely. The Metallics JPFMWV2251050 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JPFMWV2251050?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics JPFMWV2251050 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.