Hangermate 1/4 X 2 Vertical Wood Rod (Jar 25)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Jar
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Screws
Metallics JPFMWV2251000 – Frequently Asked Questions
1) What is the Metallics Hangermate JPFMWV2251000 used for?
It's a rod hanger screw for wood structure. The screw drives into a wood joist, beam, or blocking and the threaded boss on the head accepts 1/4 inch threaded rod, so you can hang conduit, strut, pipe, or cable tray without drilling and setting an anchor. The "vertical" designation means it's made for overhead, straight-down loading, driven up into the underside of the wood member.
2) What size threaded rod does this Hangermate accept, and how long is the screw?
1/4 inch rod, with a 2 inch screw. Under the common UNC convention that's 1/4-20 rod. The 2 inch length is the screw itself going into the wood, so you need at least that much sound wood above the surface you're driving into.
3) Can I use the vertical wood Hangermate on a wall or at an angle instead of overhead?
No. The vertical version is built for loads pulling straight down from an overhead wood member. For horizontal or angled pull, you need the horizontal-rated Hangermate version instead, not this one.
4) Will this Hangermate work in concrete or steel deck?
No, this is the wood version. It's a screw designed to thread into wood framing only. Concrete and steel decking need the concrete or steel versions of the Hangermate, which use a different point and thread form.
5) Do I get the threaded rod with the Metallics JPFMWV2251000?
No. The jar contains the 25 hanger screws only. The 1/4 inch threaded rod, plus any nuts, washers, or clamps for whatever you're supporting, are separate items you'll need to order along with it.
6) What is the Metallics part number for the 1/4 x 2 vertical wood Hangermate?
JPFMWV2251000. That's the Metallics manufacturer number for the 1/4 inch vertical wood rod hanger in the 2 inch screw length, 25 to a jar.
How fast can I get the Metallics JPFMWV2251000 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JPFMWV2251000 come with a warranty?
Absolutely. The Metallics JPFMWV2251000 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JPFMWV2251000?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics JPFMWV2251000 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.