Hercules® 16 oz. Pro DopeThread Sealant
15427 - spec sheet
Features
- Will not leak or drip out of the container
- Suitable for use in temperatures ranging from 0°F to 350°F
- Use in pipe systems carrying water, natural gas, air, steam, ammonia, brine, diluted acids and alkalis
- Withstands air and steam pressure up to 200 psi
- Do not use for LP gas lines or on plastic pipe
- Oil-based thread sealant with a uniform, smooth consistency for easy application
- Resists hardening and cracking
- Prevents rust and corrosion
- Designed for use with metal threaded pipe
- Wipes clean from hands
15427 - spec sheet
Manufacturer Resources
Product Specs
- Material Compatibility:
- Aluminum||Brass||Copper||CPVC||PVC||Stainless Steel
- Maximum Application Temperature C:
- 50°C
- Maximum Application Temperature F:
- 122°F
- Minimum Application Temperature C:
- -26°C
- Minimum Application Temperature F:
- -15°F
- Volume:
- 0.025
- Department:
- Plumbing
- Product Group:
- Plumbing
- Product Subgroup:
- Sealants & Fluxes
- Product Type:
- Sealant
- Product Finish:
- Gray
- Product Weight:
- 1.9
OATEY 15427 – Frequently Asked Questions
1) Can I use Hercules Pro Dope thread sealant on PVC or CPVC pipe threads?
No. Oatey's Hercules Pro Dope is an oil-based sealant for metal threaded pipe, and the instructions say not to use it on plastic pipe. For threaded PVC or CPVC joints, use a sealant rated for plastics or PTFE tape instead.
2) Is Pro Dope approved for natural gas lines and LP (propane) gas?
Natural gas yes, LP gas no. Pro Dope is listed for pipe systems carrying water, natural gas, air, steam, ammonia, brine, and diluted acids and alkalis, but the instructions specifically exclude LP gas lines. If the job is a propane run, pick a sealant that names LP gas.
3) What temperature and pressure can Hercules Pro Dope handle in service?
The sealed joint is good from 0F to 350F and withstands air and steam pressure up to 200 psi. That covers domestic hot water, low pressure steam and compressed air lines. Note this is the service range, not the application range: putting it on the pipe is a separate spec.
4) Will Pro Dope attack brass, copper or stainless fittings?
It is compatible with aluminum, brass, copper and stainless steel, which covers the usual mix of black iron nipples into brass valves and stainless trim. Compatibility is also listed for CPVC and PVC, but the product instructions say not to use it on plastic pipe, so treat metal threads as the application.
5) How cold can it be when I apply Pro Dope on an outdoor or unheated job?
Application temperature runs from -15F to 122F (-26C to 50C), so a winter service call in an unheated mechanical room or a crawlspace is still in range. The consistency is uniform and smooth so it brushes out rather than stringing in the cold.
6) Is Pro Dope a hardening or non-hardening pipe dope? Can I take the joint apart later?
It is non-hardening. The oil-based formula resists hardening and cracking, so a union or a gauge tapping can be broken and remade instead of cut out. It also prevents rust and corrosion on the threads, which is what keeps an older black iron joint from seizing.
7) Can I use Pro Dope on an ammonia refrigeration or brine line?
Yes, both are on the list of systems it is rated for, along with diluted acids and alkalis. That is a wider chemical range than a general purpose water-only dope, which is why it shows up on institutional and process piping rather than just domestic water.
8) How much sealant is in the Oatey 15427 can and what does it weigh for shipping to a jobsite?
Model 15427 is the 16 oz size of Hercules Pro Dope, with a product weight of 1.9 lb per unit. That is the brush-in-cap can most techs keep on the truck rather than a bulk quart or gallon.
9) Does pipe dope leak out of the can in a truck or a tool bag?
No. Pro Dope is formulated so it will not leak or drip out of the container, which is the difference between a can that rides in a bag and one that ruins it. The compound itself is gray and wipes off hands without solvent.
How fast can I get the OATEY 15427 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the OATEY 15427 come with a warranty?
Absolutely. The OATEY 15427 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the OATEY 15427?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the OATEY 15427 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.