HES 5300C Series Complete 12/2...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$501.40
$274.29
HES 5300 Series Electric Strike Bodies

HES 5300C Series Complete 12/24VDC Universal Electric Strike

(No reviews yet) Write a Review

Model: 5300C 630

In Stock (leaves warehouse same day if ordered before 3pm ET)

$501.40
$274.29
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

HES 5300C Series Complete 12/24VDC Universal Electric Strike

The HES 5300 Series Electric Strike is a fire-rated compact, high performance electric strike designed for low profile openings where there is limited space behind the jamb. Its strength is derived from a unique keeper pin locking design, enabling the 5300 to exceed the ratings of the frame, door and locking hardware. This field selectable fail safe/fail secure unit is easy to install and accommodates latchbolts up to 5/8" throw.

 

Electrical

  • .24 Amps at 12 VDC/VAC
  • .12 Amps at 24 VDC/VAC
  • DC continuous duty/AC intermittent duty only

 

FEATURES AND BENEFITS

Standard Features

  • Tamper resistant
  • Static strength 1,500 lbs
  • Dynamic strength 70 ft-lbs.
  • Endurance 1,000,000 cycles
  • Field selectable fail secure/ fail safe
  • Non-handed
  • Internally mounted solenoid
  • Accommodates 1/2" - 5/8" latchbolt (5/8" with 1/8" door gap)
  • Strike body depth 1-1/16"
  • Plug-in connector
  • Trim enhancer included
  • Dual voltage 12 or 24 VDC/VAC

 

Optional Features

  • LBM - Latchbolt monitor

 

CERTIFICATIONS & LISTINGS

  • UL 1034 burglary-resistant listed and suitable for outdoor use
  • UL 294 listed
  • ANSI/BHMA A156.31, Grade 1

 

AVAILABLE CONFIGURATIONS

  • HES-5300-630
  • HES-5300-LBM

Product Specs

Compatibility:
Cylindrical
Door Type:
Metal, Wood
Grade:
Grade 1
Lock Type:
Cylindrical
Product Group:
Electronic Access Controls
Product Subgroup:
Electric Strikes
Product Type:
Electric Strikes
Series:
5300 Series
Static Strength:
1500
Subcategory:
Electric Strikes
Warranty:
5 Year
Commercial/Residential:
Commercial
Electronic:
Yes
Fail-safe / Fail-secure:
Field Selectable
Product Model:
HES-5300
Product Voltage:
12/24 VDC
Door Hand Direction:
Non-handed
Fire Rating:
Yes
Product Substrate:
Stainless Steel
Product Category:
Electronic Access Controls
Department:
Door Hardware

HES 5300C 630 – Frequently Asked Questions

1) Will the HES 5300C electric strike fit a shallow jamb with limited depth behind it?
Strike body depth on the 5300 is 1-1/16 inches, which is what makes it a low profile unit for openings where there isn't much room behind the jamb. That depth is the number to check against your frame cavity before you cut. It mounts in metal or wood frames.
2) What latchbolt throw will the HES 5300 electric strike accept?
It takes latchbolts from 1/2 inch to 5/8 inch throw, and the 5/8 inch figure assumes a 1/8 inch door gap. If your gap is tighter than that with a full 5/8 inch bolt, the keeper won't clear properly. It's built for cylindrical locksets.
3) Can the 5300 electric strike be set to fail safe or does it have to be ordered that way?
Fail safe and fail secure are field selectable on the 5300, so one part number covers both and you set it at install. Fail secure keeps the door locked when power drops (egress is still by the lever from inside); fail safe releases the keeper on power loss for a door that has to open when the system goes down.
4) Do I need to order a left hand or right hand version of the HES 5300 strike?
No handing to specify. The 5300 is non-handed, so the same unit works on either swing. That's one less thing to get wrong on a multi-door order where the openings aren't all handed the same way.
5) Is the HES 5300 electric strike fire rated and Grade 1?
Fire rated, ANSI/BHMA A156.31 Grade 1, UL 294 listed, and UL 1034 burglary-resistant listed and suitable for outdoor use. That combination is what a facility spec on a fire-rated opening normally calls for, and it covers exterior doors as well as interior.
6) Does the HES 5300 run on 12V or 24V, and how much current does it draw?
Dual voltage, 12 or 24 VDC/VAC, selectable in the field, so it drops onto either supply. Draw is .24 amps at 12V and .12 amps at 24V. DC is continuous duty; AC is intermittent duty only, so don't hold it energized on AC. Wiring is a plug-in connector.
7) Will the HES 5300 work with a mortise lock or an exit device?
No. The 5300 is built for cylindrical locksets. For a mortise lock, look at the Von Duprin 6210 or the 6400, both Grade 1 fire rated strikes for mortise locks, or the Securitron MUNL mortise unlatch strike. For a rim exit device, the Hager 2945 is a fire rated rim exit strike with field selectable fail safe/fail secure and a latchbolt monitor.
8) The opening has a mortise lock, not a cylindrical one. What replaces the HES 5300C?
The HES 5300C is specified for cylindrical locks, so a mortise opening needs a different body. The Von Duprin 6210 is an electric strike for mortise locks, Grade 1, heavy duty, 24 VDC fail-secure and UL 10C fire rated. The Von Duprin 6400 32D is a Grade 1 modular strike that covers mortise or cylindrical locks, fail-secure, satin stainless steel, with a 3-hour UL 10C fire rating. The Hager 2930 is a fire rated Grade 1 strike for cylindrical and mortise locks with 12/24 VDC dual voltage and field reversible fail safe/secure operation, which is the closest match if the job also needs both voltages and reversible operation.
9) Can an HES 5300C be used in an aluminum storefront jamb?
The HES 5300C is specified for metal and wood doors and cylindrical locks. Aluminum storefront jambs with narrow stile hardware are normally served by a strike built for that frame: the Adams Rite 7100 Series and the Adams Rite 7160 are electric strikes for aluminum jambs with a 1-1/4 inch by 4-7/8 inch faceplate. Both Adams Rite units are listed as not fire rated, so on an aluminum opening that carries a fire label the 5300C, which is fire rated, is the one to specify if the lock and frame prep suit it.
10) Which electric strikes give latchbolt monitoring like the HES 5300 LBM option?
The 5300 is offered with and without latchbolt monitoring, ordered as the LBM configuration. If the access control panel needs a door-secure signal from a different brand, the Dortronics 3300 Series has a latch bolt sensing switch, runs 12/24 VDC, and uses a strike plate for ANSI prep at 4-7/8 inch by 1-1/4 inch. The Hager 2945 is a fire rated rim exit strike with a latchbolt monitor and field selectable fail safe/fail secure. The Camden CX-ED1799L-8 is a Grade 1 fire rated dual monitor strike supplied with 8 faceplates. The Dortronics and Camden units monitor at a strike prepped for a cylindrical latch or a universal cavity; the Hager 2945 monitors at a rim exit device, which is a different opening entirely.
11) Which electric strikes look like a substitute for the HES 5300C but will not work on a cylindrical latchbolt?
Several strikes in the same family are prepped for a different latch. The SDC 30-4 Series is a rim mount strike for a 3/4 inch Pullman latchbolt, which is exit device hardware, not a cylindrical latch. The Hager 2945 is a rim exit strike. The Von Duprin 6210 is built for mortise locks. The Camden CX-ED1959 Series is an outdoor rated gate strike and is not fire rated. The Rockwood 310-1 Series double door strike is a Grade 1 fire rated unit with a 3/4 keeper for a double door application. The 5300C is a cylindrical lock strike that accommodates a 1/2 inch to 5/8 inch latchbolt, so confirm the latch type on the door before swapping any of these in.
12) Should I order the HES 5300 with latchbolt monitoring or without?
Two ways to buy it: with the LBM latchbolt monitor, or without. Take the monitor if your access control panel or alarm needs to know the door is actually latched, not just that the strike relaxed. If you only need release from a reader or button, the standard unit is enough. It's an order-time choice, not a field add.
13) How strong is the HES 5300 strike for a high traffic or abuse-prone door?
Static strength is 1,500 lbs, dynamic strength 70 ft-lbs, and endurance is 1,000,000 cycles. The keeper pin locking design is where the holding force comes from. Stainless steel body, tamper resistant. For a high-cycle entrance or a door that gets kicked, those are the numbers to hold a competing strike against.
14) I need a fire rated strike but the frame prep is already cut for a different faceplate. What are my options?
Where the existing cutout drives the decision, the multi-faceplate units are the ones to look at: the Camden CX-ED1689L-4 is a fire rated low profile universal strike supplied with four faceplates, and the CX-ED1799L-8 is a fire rated Grade 1 dual monitor strike with eight. The Locknetics NC450 is a no-cut strike. The 5300 is a low profile fire rated unit, but match the prep before you commit either way.
15) Is there a simpler electric strike than the HES 5300C for a non-rated interior door?
Where the opening carries no fire label, several lighter units cover it. The SDC 15 Series is a value electric strike with 5/8 inch latchbolt and 12/24 VDC operation, matching the 5300C on both latch throw and voltage. The SDC 25 Series is a value strike for 1/2 inch latchbolt. The RCI 15BS is an economy strike for a special offset latch entry with fail-secure operation, and the Trine 001 Series is a light commercial fail-secure strike with a 5-7/8 inch by 1-1/4 inch faceplate. The RCI 15BS and the Trine 001 are listed as not fire rated, so neither belongs on a labeled opening. The 5300C is fire rated and Grade 1, with 1,500 lbs static strength and field selectable fail safe/fail secure, so hold it for openings that need the rating or the reversible function.
16) What is the difference between the HES 5300C and a universal electric strike supplied with multiple faceplates?
The 5300C is a compact body meant for low profile openings with limited space behind the jamb, at a 1-1/16 inch strike body depth, non-handed, and it ships with a trim enhancer. The Camden CX-ED1689L-4 is a fire rated universal low profile strike supplied with 4 faceplates, and the Camden CX-ED1799L-8 is a Grade 1 fire rated dual monitor strike supplied with 8 faceplates; the Camden CX-ED1410 and CX-ED1420 are universal Grade 1 ANSI fire rated strikes. The multi-faceplate units let one body cover several frame preps out of one box, which suits a service truck carrying stock for unknown openings. The 5300C is specified against a known cylindrical opening and a shallow jamb cavity.
17) Is there an alternative to the HES 5300C that runs on AC transformer power only?
The 5300C is dual voltage 12 or 24 VDC/VAC, drawing .24 amps at 12 volts and .12 amps at 24 volts, with DC continuous duty and AC intermittent duty only. If the opening is fed from an existing AC transformer, the Trine 004 runs 8-16VAC, fail secure, fire rated, with a 6-1/4 inch by 1-3/8 inch faceplate and up to 5/8 inch throw, and the Trine 2001 runs 16-24VAC/DC, fail secure, fire rated, with a 5-7/8 inch by 1-1/4 inch faceplate and up to 5/8 inch throw. Both are fixed fail secure. Match the faceplate size to the existing frame cutout before ordering, since neither Trine faceplate matches the other.
18) For a high-traffic entrance, what heavy duty electric strikes compare to the HES 5300C?
The 5300C is rated Grade 1 with 1,500 lbs static strength, 70 ft-lbs dynamic strength, and 1,000,000 cycles endurance, on a stainless steel body. Peers carrying a heavy duty rating include the Alarm Controls AES-100, a Grade 1 heavy duty strike; the Locknetics MDS100 US32D and MS100 US32D, both heavy duty; and the Von Duprin 4211 32D, 6210, and 6400 32D, all Grade 1 heavy duty. Of those, the Von Duprin 4211 32D is the one built for cylindrical locks with 12/24 VDC field-selectable operation, so it lines up with the 5300C on lock type as well as duty.
19) Which fire-rated electric strikes can be standardized across a facility alongside the HES 5300C?
For a facility standard, the fire rated Grade 1 group runs to the Von Duprin 4211 32D for cylindrical locks, the Von Duprin 6210 for mortise locks, the Von Duprin 6400 32D modular unit for mortise or cylindrical with a 3-hour UL 10C rating, the Securitron MUNL mortise unlatch strike, the Rockwood 310-1 Series double door strike with a 3/4 keeper, and the Camden CX-ED1799L-8 dual monitor unit. The 5300C is Grade 1 and fire rated for cylindrical locks, UL 1034 burglary-resistant listed and suitable for outdoor use, UL 294 listed, and certified to ANSI/BHMA A156.31 Grade 1. A single-brand standard across mixed openings usually needs a cylindrical body, a mortise body, and a double door unit, so pair the 5300C with the mortise and double door units above where the lock type changes.
20) Is there a fire-rated electric strike with a radius corner faceplate instead of the HES 5300C?
The SDC 45F Series is a fire-rated electric strike with 5/8 inch latchbolt compatibility and a radius corner faceplate, which suits frames prepped with rounded corners. The Adams Rite 7240 is a fire-rated strike for cylindrical locksets with 5/8 inch latchbolt projection. The 5300C is fire rated and accommodates a 1/2 inch to 5/8 inch latchbolt, with 5/8 inch requiring a 1/8 inch door gap. All three cover the same 5/8 inch latch; the faceplate corner and the frame prep decide which one goes in.
21) Is anything extra needed to make the HES 5300 look right in the frame after install?
A trim enhancer ships with the strike, which is what closes up the gap around the body in the frame cutout, so nothing separate to order for that. Wiring uses a plug-in connector rather than a terminal strip.
22) Is the HES 5300 suitable for a residential door or is it a commercial strike?
Commercial. Grade 1 with a million-cycle endurance rating and 1,500 lbs static strength is built for traffic well past a house, and it's specified for commercial openings. On a fleet of apartment or office entries it standardizes well because it's non-handed and dual voltage, so one part covers every opening regardless of swing or panel supply.
How fast can I get the HES 5300C 630 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the HES 5300C 630 come with a warranty?
Absolutely. The HES 5300C 630 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the HES 5300C 630?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the HES 5300C 630 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!