HES 8000C Electric Strike Com...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$284.00
$171.33
HES HES 8000C Complete Electric Strike Pacs for Latchbolt Locks HES-8000C

HES 8000C Electric Strike Complete Pacs for Latchbolt Locks

(No reviews yet) Write a Review

Model: 8000C 630

In Stock (leaves warehouse same day if ordered before 3pm ET)

$284.00
$171.33
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

HES 8000C ELECTRIC STRIKE COMPLETE PAC FOR LATCHBOLT LOCK

The HES 8000 Door Strike is a compact, high performance electric strike featuring a unique concealed design for use with cylindrical locksets. No cutting on the frame is required. Simply remove the existing strike plate, adjust the vertical alignment feature to the latchbolt centerline and install. Its strength is derived from a unique keeper pin locking design, enabling the HES 8000 to exceed the ratings of the frame, door and locking hardware. This field selectable fail safe/fail secure unit is easy to install and accommodates latchbolts up to 5/8" throw.

 

The 8000 Series is also available in a Complete One Box Solution:

  • HES 8000C Strike - Complete Pac

 

Frame application

  • Metal
  • Wood
  • Aluminum

 

Electrical

  • .24 Amps at 12 VDC/VAC
  • .12 Amps at 24 VDC/VAC
  • DC continuous duty/AC intermittent duty only

 

Standard Features

  • Falls within the guidelines for retrofit into fire-rated frames
  • No cutting on frame required
  • Vertical adjustability to accommodate door sag and misalignment
  • Tamper resistant
  • Static strength 1,500 lbs.
  • Dynamic strength 70 ft-lbs.
  • Endurance 500,000 cycles
  • Field selectable fail safe/fail secure
  • Non-handed
  • Accommodates 1/2"-5/8" cylindrical latchbolt (5/8" with 1/8" door gap)
  • Strike body depth 1-1/16"
  • Plug-in connector
  • Five year limited warranty

 

Optional Features

  • LBM - Latchbolt Monitor

 

Finishes

  • 630 - Satin stainless steel
  • 605 - Bright brass
  • 606 - Satin brass
  • 612 - Satin bronze
  • 613 - Bronze toned
  • 629 - Bright stainless steel
  • BLK - Black
    *Complete Pacs are only available in the 630 finish

 

FACEPLATES and ACCESSORIES

Faceplate Options

  • 801 (4-7/8" x 1-1/4") For use with cylindrical locksets in ANSI metal jambs. For use with latchbolts up to 5/8" throw. ANSI/BHMA Numbers: #E05031, #E09321, #E09322, #E09323
  • 801A (4-7/8" x 1-1/4", radius corners and flat faceplate) For use with cylindrical locksets. For use with latchbolts up to 5/8" throw. Includes universal mounting tabs. Aluminum frames. ANSI/BHMA Numbers: #E05031, #E09321, #E09322, #E09323
  • 801E (4-7/8" x 1-1/4", Extended lip) For use with extended lip for "knock-down" style frame installations. For use with cylindrical latchbolts up to 5/8" throw. ANSI/BHMA Numbers: #E05031, #E09321, #E09322, #E09323
  • 802 (7-15/16" x 1-7/16") For use with cylindrical locksets. For use with latchbolts up to 5/8" throw. Includes universal mounting tabs. Aluminum frames. ANSI/BHMA Numbers: #E05031, #E09321, #E09322, #E09323
  • 803 (6-7/8" x 1-1/4", radius corners and flat faceplate) For use with cylindrical locksets. For use with latchbolts up to 5/8" throw. Includes universal mounting tabs. Aluminum applications. ANSI/BHMA Numbers: #E05031, #E09321, #E09322, #E09323
  • 805 (9" x 1-3/8", radius corners and flat faceplate) For use with cylindrical locksets. For use with latchbolts up to 5/8" throw. Four point mounting for wood installations. ANSI/BHMA Numbers: #E05031, #E09321, #E09322, #E09323

 

Accessories

  • 2001M - Plug-in bridge rectifier
  • 2004M - ElectroLynx® adapter
  • 2005M3 - SMART Pac III™
  • 2006M - Plug-in buzzer

 

CERTIFICATIONS and LISTINGS

  • UL 1034 burglary-resistant listed and suitable for outdoor use
  • UL 294 listed
  • ANSI/BHMA A156.31, Grade 1

Product Specs

Product Group:
Electronic Access Controls
Series:
8000 Series
Grade:
Grade 1
Shim:
Vertically Adjustable
Dynamic Strength:
70 ft-lbs
Warranty:
5 Year (10 Year when SmartPACIII)
Endurance Cycles:
1,000,000
Product Subgroup:
Electric Strikes
Product Type:
Electric Strikes for Latchbolts
Subcategory:
Electric Strikes
Door Type:
Hollow Metal, Aluminum, Wood
Lock Type:
Cylindrical
Outdoor Rated:
Yes
Preload Capable:
No
Windstorm Rated:
No
Commercial/Residential:
Commercial
Electronic:
Yes
Power:
Power over Ethernet (POE)
Battery Operated:
No
Fail-safe / Fail-secure:
Field Selectable
Holding Force:
1500
Tags:
hes 8000c 630, 8000c 630
Product Model:
HES-8000C
Product Voltage:
12/24 VDC
Face Plate:
4-7/8"
Fire Rating:
No
Latch Specification:
Latchbolt
Product Category:
Electronic Access Controls
Product Substrate:
Stainless Steel
Product Width:
1-1/16"
Department:
Door Hardware
Product Depth:
1-7/16"

HES 8000C 630 – Frequently Asked Questions

1) Will the HES 8000C electric strike work with my cylindrical lockset's latchbolt?
The 8000C takes cylindrical lockset latchbolts with a 1/2 inch to 5/8 inch throw. The full 5/8 inch throw only works where you have a 1/8 inch gap between door and frame; tighter than that and you need to be at the shorter end of the range. Measure the projected latchbolt on your existing lock before ordering, because that throw is what the keeper is built around.
2) I have a mortise lock or a deadbolt on the door. Can I use an HES 8000C strike?
No. The 8000 Series is built for cylindrical lockset latchbolts, 1/2 to 5/8 inch throw, and the keeper is matched to that latch. A mortise lock's latch and a deadbolt's bolt are different geometry and a different prep, so you need an electric strike specified for that bolt type instead. If your opening has a cylindrical lever or knob set, the 8000C is the right family.
3) Do I have to cut the frame to install an HES 8000 electric strike?
No cutting. The 8000 is a concealed design that goes into the existing strike prep: pull the old strike plate, set the vertical adjustment to the latchbolt centerline, and install. The vertical adjustability is there specifically to take up door sag and misalignment, so an old opening that has dropped a little still lines up. Metal, wood, and aluminum frames are all covered.
4) My door is under pressure from the closer and weatherstripping. Will the HES 8000C release under that load?
Plan on it not doing so. The 8000C is not a preload capable strike, so if the latch is loaded against the keeper by a positive-pressure opening, stack pressure, or compressed weatherstrip, you want a strike specifically rated for preload. On a normally hung interior or entry door where the latch sits free in the keeper, the 8000C is fine.
5) Is the HES 8000C fail safe or fail secure, and do I have to choose when I order?
Field selectable, both ways, so one part number covers either and the decision happens at the door rather than on the purchase order. Fail secure keeps the strike locked when power drops, so the opening stays secure and people still get out by turning the lever from the inside. Fail safe releases the keeper on power loss, which is what you want where the strike has to unlock on a fire alarm or power failure. Check what your egress and life safety plan calls for on that particular door before you set it.
6) What power supply does the HES 8000C electric strike need?
Current draw is .24 amps at 12 VDC or VAC and .12 amps at 24 VDC or VAC, and the unit runs on 12/24 VDC. On DC it is continuous duty, so it can sit energized. On AC it is intermittent duty only, which means it is not meant to be held energized on an AC feed. If your existing transformer is AC and you need continuous holding, the 2001M plug-in bridge rectifier is the series accessory for that. Connection at the strike is a plug-in connector, so there is no splicing inside the frame.
7) What is the difference between the HES 8000C and the 8000C-LBM?
The LBM version adds a latchbolt monitor. That contact tells your access control panel or alarm whether the latchbolt is actually projected into the keeper, so you can tell a genuinely secured door from one that was pushed to but never latched. If all you need is a release at the door, the plain 8000C Complete Pac covers it. Both are the same strike otherwise, field selectable fail safe or fail secure and non-handed.
8) Which faceplate do I need for my frame with an HES 8000 strike?
The 8000C is specified with a 4-7/8 inch face plate. Across the series the choices are: 801, 4-7/8 x 1-1/4 inches, for ANSI metal jambs; 801A, same 4-7/8 x 1-1/4 with radius corners, a flat plate and universal mounting tabs, for aluminum frames; 801E, 4-7/8 x 1-1/4 with an extended lip for knock-down frame installs; 802 at 7-15/16 x 1-7/16 and 803 at 6-7/8 x 1-1/4, both with mounting tabs for aluminum applications; and 805 at 9 x 1-3/8 with four point mounting for wood. All of them are rated for cylindrical latchbolts up to 5/8 inch throw, so the faceplate choice is about the frame you are going into, not the lock.
9) Can an HES 8000C go into an aluminum storefront frame?
Aluminum frames are one of the three frame applications for the 8000, along with hollow metal and wood, and no frame cutting is required. For aluminum the faceplate options are the 801A, which has radius corners, a flat plate and universal mounting tabs, plus the 802 at 7-15/16 x 1-7/16 inches and the 803 at 6-7/8 x 1-1/4 inches. The catch on storefront is the lock, not the frame: the 8000 only works with a cylindrical latchbolt of 1/2 to 5/8 inch throw. If that door has a mortise or hookbolt lock, this is the wrong strike for it.
10) How much force will the HES 8000 electric strike hold on a pushed-on entry door?
1,500 lbs static strength and 70 ft-lbs dynamic strength, with a stainless steel body and a keeper pin locking design that HES says exceeds the ratings of the frame, door, and locking hardware around it. It carries Grade 1 under ANSI/BHMA A156.31 and is UL 1034 burglary-resistant listed and UL 294 listed, and the unit is tamper resistant. For a commercial entrance that gets leaned on and pulled at, those are the numbers to hand the spec writer.
11) Can the HES 8000C be used on an exterior door?
Yes. The 8000 is UL 1034 burglary-resistant listed and suitable for outdoor use, and it is rated for outdoor application. It is not a windstorm rated assembly, so if the opening has to carry a windborne debris or hurricane approval, this strike will not satisfy that part of the spec.
12) Can I put an HES 8000 into a fire-rated frame?
HES states the 8000 falls within the guidelines for retrofit into fire-rated frames, and because no cutting of the frame is required, the labeled frame's existing prep is not modified. The strike itself is not supplied as a fire rated device, so on a labeled opening it should be set to fail secure and signed off by your authority having jurisdiction, since a fire door has to stay positively latched.
13) Can I get the HES 8000C Complete Pac in brass to match the rest of my hardware?
Complete Pacs are 630 satin stainless steel only. The 8000 Series as a whole is offered in 605 bright brass, 606 satin brass, 612 satin bronze, 613 bronze toned, 629 bright stainless and BLK black, but none of those apply to the Complete Pac. Since the strike body sits concealed in the frame and only the faceplate shows on the jamb, 630 next to brass lever trim is a common enough combination that most buildings live with it. If the jamb finish genuinely has to match, look at the 8000 Series in a non-Pac configuration.
14) Do I need to specify handing when ordering an HES 8000C?
Non-handed, so one unit covers a left or right hand door and you do not need to know the swing to order. Fail safe versus fail secure is field selectable too. That leaves one real decision on the order: the plain 8000C Complete Pac, or the 8000C-LBM with the latchbolt monitor.
15) What accessories can I add to an HES 8000 Series electric strike?
Four are listed for the series: the 2001M plug-in bridge rectifier, the 2004M ElectroLynx adapter, the 2005M3 SMART Pac III, and the 2006M plug-in buzzer. The rectifier is the one to reach for on an AC supply, and the buzzer gives an audible signal at the door when the strike is released. At the strike itself the connection is a plug-in connector, so the accessories land on that rather than on a splice in the frame.
How fast can I get the HES 8000C 630 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the HES 8000C 630 come with a warranty?
Absolutely. The HES 8000C 630 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the HES 8000C 630?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the HES 8000C 630 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!