You may also like
INS NYL RING TERM 2 BOLT 1/4IN RED
Manufacturer Resources
Product Specs
- Country Of Origin:
- Mexico (MX)
- Product Subgroup:
- General Terminals
- Product Type:
- Nylon Insulated Ring Terminal
- Standards:
- UL E9809
- Voltage Rating:
- 600 V
- Wire Size:
- 2 AWG
- Department:
- Electrical
- Product Group:
- Wire Termination
- Product Color:
- Red
- Product Material:
- Copper
Sta-Kon RG2-14 – Frequently Asked Questions
1) What wire size does the Sta-Kon RG2-14 ring terminal take?
The RG2-14 is sized for 2 AWG conductor. It's a crimp-on barrel, so the wire has to actually be 2 AWG to get a proper compression; a smaller conductor in a 2 AWG barrel won't hold mechanically or electrically.
2) Will a 2-bolt ring terminal like the RG2-14 land on 1/4 inch studs?
Yes. The RG2-14 is a two-bolt ring terminal with 1/4 inch holes, so it lands on a pair of 1/4 inch studs or bolts. The two-hole pattern is what keeps a heavy 2 AWG lead from rotating on the pad under torque, which is why panel and busbar terminations often call for it instead of a single-hole lug. You do need the stud spacing on your pad to match the terminal's hole centers.
3) Is the RG2-14 terminal copper or aluminum, and can I use it on aluminum conductor?
The barrel is copper, so use it on copper conductor. Aluminum conductor needs a lug rated and marked for aluminum (AL or AL/CU) with the right compound and die, and this one isn't that part.
4) Is the Sta-Kon RG2-14 ring terminal rated for 600 volt circuits?
600 V is the stated rating, and the terminal is UL recognized under file E9809. That covers typical commercial branch circuit and panel work at 120/208, 277/480 and similar.
5) What exact part number do I order for a Sta-Kon 2 AWG two-hole 1/4 inch ring terminal?
Order Sta-Kon RG2-14. That number breaks down the way the rest of the line does: 2 AWG conductor, 1/4 inch bolt hole, two-bolt tongue, red nylon insulation.
6) Do I need a special crimp tool for a 2 AWG insulated ring terminal?
Yes. A 2 AWG barrel is well past hand-plier range; it takes a hydraulic or heavy mechanical compression tool with the die matched to 2 AWG copper. The tool and dies are not supplied with the terminal, so plan for them on the job.
7) Why choose a nylon insulated ring terminal instead of a bare lug with heat shrink?
The nylon sleeve on the RG2-14 comes already on the terminal and gives you insulation and some strain relief at the barrel in one step, rated to 600 V. A bare lug means a separate shrink sleeve and a heat source on site. Where the conductor has to be sealed against moisture or you need a specific shrink color for phase ID, a bare lug with adhesive-lined shrink is the better choice.
How fast can I get the Sta-Kon RG2-14 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Sta-Kon RG2-14 come with a warranty?
Absolutely. The Sta-Kon RG2-14 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Sta-Kon RG2-14?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Sta-Kon RG2-14 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.