You may also like
INS NYL RING TERM 8 BOLT No10 RED
Manufacturer Resources
Product Specs
- Country Of Origin:
- Mexico (MX)
- Product Subgroup:
- General Terminals
- Product Type:
- Nylon Insulated Ring Terminal
- Standards:
- UL E9809
- Voltage Rating:
- 600 V
- Wire Size:
- 8 AWG
- Department:
- Electrical
- Product Group:
- Wire Termination
- Product Color:
- Red
- Product Material:
- Copper
Sta-Kon RD367 – Frequently Asked Questions
1) What wire size does the Sta-Kon RD367 ring terminal take?
The RD367 is built for 8 AWG wire. It is a crimp-on ring terminal with a copper barrel, so it needs a crimp tool matched to 8 AWG, not a pliers squeeze. If your conductor is 10 or 12 AWG, this barrel is too large to hold a reliable crimp and you want a smaller terminal.
2) Can I use this Sta-Kon terminal on a 480V motor connection?
Yes. The RD367 nylon insulated ring terminal carries a 600 V rating, which covers 480 V and 277 V branch circuits as well as standard 120/240 V work.
3) Is the Sta-Kon RD367 UL listed for inspected commercial work?
It carries UL file E9809, which is the listing an inspector looks for on a terminal used in a panel or control enclosure. Combined with the 600 V rating, that covers typical commercial branch circuit and control terminations.
4) Should I use a ring terminal or a fork terminal for an 8 AWG feeder landing?
A ring terminal like the RD367 is the choice where the connection cannot be allowed to back off the stud, because the ring captures the screw completely. A fork or spade slides out if the screw loosens, which is why it is used only where the terminal needs to be removed often. For an 8 AWG power or motor lead on a No. 10 stud, the ring is the one to land.
5) Why is the RD367 red, and does the color tell me anything?
The insulation on the RD367 is red. On Sta-Kon nylon insulated terminals the color is a size code, and here it identifies the 8 AWG barrel, so a crew can sort terminals by eye on the bench instead of reading each one.
6) Is the nylon insulation on this terminal better than vinyl for a hot enclosure?
The RD367 uses nylon insulation rather than vinyl. Nylon is the tougher sleeve of the two, which is why it is specified where terminals get pulled through conduit, bundled tightly, or sit in a warm control cabinet. The barrel underneath is copper.
7) What is the exact part number to order this Sta-Kon ring terminal?
Order it as Sta-Kon RD367. That is the manufacturer part number for the red nylon insulated 8 AWG ring terminal with a No. 10 bolt hole.
How fast can I get the Sta-Kon RD367 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Sta-Kon RD367 come with a warranty?
Absolutely. The Sta-Kon RD367 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Sta-Kon RD367?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Sta-Kon RD367 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.