International Door Closers OP-6001/OP-6002 3/4" Offset Pivot Set For 7/64" Recessed Doors

Yes, it is a handed set. You order it as left flush door or right flush door, so establish the swing at the opening before you buy. There is no universal or field-reversible version.

There is 1/8 inch of vertical adjustment built into the set, which is what you use to dial in the head clearance and threshold gap once the door is hung.

It is a commercial pivot set. The top frame portion runs an Oilite bronze bushing, the top door portion takes a case hardened spring loaded pin, the bottom door portion uses a full race ball bearing, and the floor/jamb portion has a case hardened stud. That bearing is what keeps a storefront door swinging smoothly under repeated use.

The 6000 Series uses a case hardened spring loaded pin in the top door portion and a case hardened stud in the floor/jamb portion. The 5000 Series instead uses a fixed case hardened pin up top and a stainless steel stud at the floor. The spring loaded pin makes installing and removing the door easier.

Fire rating is not what the 6000 Series offset set is sold on. If the opening is labeled, look at the Don-Jo BP-1-34 bottom pivot (heavy duty, fire rated, 3/4 inch offset, ordered LHR or RHR) or the McKinney PH-4 pocket pivot, both of which we carry as fire rated.

Not directly. The OP-6001/OP-6002 is a commercial offset pivot set built for 7/64 inch recessed doors, with an Oilite bronze bushing in the top frame portion, a full race ball bearing in the bottom door portion, and 1/8 inch vertical adjustment. The Deltana PH35 at 3-7/8 inch x 5/8 inch x 1-5/8 inch and the PH40 at 4-3/8 inch x 5/8 inch x 1-7/8 inch are light duty pivot hinges, and neither is fire rated. The Deltana PH60, at 4-3/8 inch x 5/8 inch x 1-7/8 inch, is the heavy duty version of that family. These are cabinet and light door style pivot hinges rather than offset pivot sets for aluminum storefront leaves.

Yes. The OP-6001/OP-6002 offset pivot set is a handed item and is ordered as Left Flush Door or Right Flush Door, in AL Aluminum or DU Storefront Bronze. Don-Jo's 3/4 inch offset bottom pivots are also handed and split by part number, BP-1-34-LHR for left hand reverse and BP-1-34-RHR for right hand reverse, while the BP-2-34 bottom pivot is not called out by hand in its part number.

The OP-6001/OP-6002 is a complete offset pivot set with top frame, top door, bottom door and floor or jamb portions, including a case hardened spring loaded pin and 1/8 inch vertical adjustment, for doors up to 125 lbs. The Don-Jo HRP-1 is a reinforcing pivot in heavy duty steel with a satin chrome finish and the same 3/4 inch offset, used as an intermediate pivot to support the leaf rather than as the pivot set the door swings on.

Two: AL aluminum and DU storefront bronze, both offered in left and right hand. Those are the standard storefront colors, so matching existing aluminum entrance doors is straightforward.

No. The OP-6001/OP-6002 is a mechanical pivot set with no power transfer. If you need electrified hardware in the leaf, the current has to come through a separate transfer device.

They are not interchangeable. The OP-6001/OP-6002 bottom portions are part of a matched offset pivot set for 7/64 inch recessed commercial doors, with a full race ball bearing in the bottom door portion and a case hardened stud in the floor or jamb portion. The Deltana PB985 is a solid brass pivot base sold each, and it is a standard duty part that is not fire rated.