Ives 711 Stainless Steel Swing...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$973.50
$564.28
Ives Ives 711 Stainless Steel Swing Clear Pin and Barrel Continuous Hinge (Satin Stainless Finish) IVE-711

Ives 711 Stainless Steel Swing Clear Pin and Barrel Continuous Hinge with Satin Stainless Finish

(No reviews yet) Write a Review

Model: IVE-711 83 US32D

In Stock (leaves warehouse same day if ordered before 3pm ET)

$973.50
$564.28
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Ives 711 Stainless Steel Swing Clear Pin and Barrel Continuous Hinge with Satin Stainless Finish

Heavy-Duty Swing Clear Continuous Hinge for Commercial Applications

The Ives 711 Stainless Steel Swing Clear Pin and Barrel Continuous Hinge delivers professional-grade performance for doors up to 300 pounds without reinforcing or 600 pounds with reinforcing. Featuring a 1/4" diameter pin with nylon self-lubricating, medical grade split bearing, this non-handed hinge accommodates doors up to 48" maximum width. The swing clear design mounts on the door stile's side and frame side jamb face, providing full door clearance when opened. ANSI 156.26 certified construction ensures reliable performance in demanding commercial environments.

Professional Features & Benefits

  • Heavy-Duty Load Capacity: Supports doors weighing up to 300 pounds without reinforcing, or 600 pounds with reinforcing for versatile commercial applications.
  • Maximum Door Width: Accommodates doors up to 48" maximum width with square edge door requirements for broad compatibility.
  • Medical Grade Bearing System: 1/4" diameter pin with nylon self-lubricating, medical grade split bearing provides smooth, long-lasting operation.
  • Swing Clear Design: Mounts on door stile's side and frame side jamb face, allowing complete door clearance when opened for maximum accessibility.
  • Stainless Steel Construction: Durable stainless steel construction with satin stainless finish (630/US32D) provides corrosion resistance and professional appearance.
  • Non-Handed Installation: Non-handed design simplifies inventory and installation, with handing required only for custom cut lengths.
  • Standard Length Options: Available in 83", 85", 95", and 120" standard lengths to accommodate various door heights.
  • ANSI Certification: ANSI 156.26 certified for commercial applications ensuring code compliance and professional standards.

Technical Specifications

  • ANSI/BHMA: ANSI 156.26
  • Commercial/Residential: Commercial
  • Department: Door Hardware
  • Door Hand Direction: Non-Handed
  • Door Weight: 300
  • Product Category: Door Hinges and Pivots
  • Product Group: Door Hinges and Pivots
  • Product Model: 711
  • Product Subgroup: Continuous Hinges
  • Product Substrate: Stainless Steel
  • Product Type: Pin and Barrel Continuous Hinges
  • Subcategory: Hinges and Pivots

Installation & Operation

  1. Review manufacturer specifications and verify door preparation requirements including door thickness, stile width, and handing as applicable to this product.
  2. Use manufacturer-provided templates to mark mounting hole locations accurately on door and frame surfaces.
  3. Prepare door and frame by drilling required holes and routing as specified in manufacturer instructions.
  4. Install all mounting hardware and secure the device to door and frame per manufacturer torque specifications.
  5. Adjust operational components for proper alignment, latching, and smooth operation throughout the full range of motion.
  6. Test device operation to verify proper function and make final adjustments as needed. Refer to manufacturer documentation for complete installation details and troubleshooting.

Professional Applications

  • Commercial Office Buildings
  • Educational Facilities
  • Healthcare Institutions
  • Retail Establishments
  • Industrial and Warehouse Facilities
  • Multi-Tenant Residential Properties
  • Government and Municipal Buildings

Why Choose Ives Quality?

Ives continuous hinge products deliver professional-grade reliability with stainless steel construction and medical grade nylon bearings rated for demanding commercial applications. ANSI 156.26 certification ensures code compliance and professional standards. Engineered for high-use and high-traffic doors where dependable performance and door alignment are essential.

Product Specs

Product Group:
Door Hinges and Pivots
Subcategory:
Hinges and Pivots
Product Subgroup:
Continuous Hinges
Product Type:
Pin and Barrel Continuous Hinges
ANSI/BHMA:
ANSI 156.26
Door Weight:
300
Commercial/Residential:
Commercial
Product Model:
711
Door Hand Direction:
Non-Handed
Product Category:
Door Hinges and Pivots
Product Substrate:
Stainless Steel
Department:
Door Hardware

Ives IVE-711 83 US32D – Frequently Asked Questions

1) How heavy a door will the Ives 711 continuous hinge carry?
Up to 300 pounds with no frame reinforcing, and up to 600 pounds when the frame is reinforced. That covers most hollow metal and solid core commercial leaves. Door width is the other limit: 48 inches maximum, and the door needs a square edge, not a beveled one.
2) I need a continuous hinge on a 3-hour fire rated door. Does the Ives 711 cover that or should I look at something else?
The Ives 711 is certified to ANSI 156.26 for commercial use, and no fire rating is part of what defines it - it is specified for its swing clear geometry and its 300 pound capacity without reinforcing, 600 pounds with reinforcing. The Pemko CFM83-HD3, an 83 inch heavy duty Grade 3 full mortise continuous geared hinge, is the one in this group that carries fire door language: Firepins are required on 3-hour fire rated doors. On a rated opening, match the hinge to the door manufacturer's listing and the approved hardware schedule rather than assuming a continuous hinge carries the label.
3) What is the closest alternative to the Ives 711 continuous hinge if I need a geared hinge instead of pin and barrel?
The Ives 711 is a pin and barrel continuous hinge in stainless steel, built around a 1/4 inch diameter pin with a nylon self-lubricating medical grade split bearing. If the specification calls for a geared continuous hinge instead, the Pemko FM Series is a full mortise continuous geared hinge, and the Pemko CFM/DFM PemKonnect Series is a Grade 1 continuous geared modular hinge offered in 83 inch and 95 inch lengths that line up with two of the four standard lengths the 711 is made in. Pin and barrel and geared hinges differ in how the leaves are joined and in their frame and door preparation, so confirm which construction the door schedule names before substituting.
4) Do I have to stock a left hand and a right hand version of the Ives 711?
No. In the four standard lengths the 711 is non-handed, so one part number covers both hands of a pair and simplifies what a property manager or MRO stockroom has to carry. The only time hand comes into it is a custom cut length.
5) Is the Ives 711 hinge suitable for a healthcare or wet-clean environment?
It is built from stainless steel with a satin stainless 630/US32D finish, so it takes repeated cleaning and damp conditions better than a plated steel hinge. The pivot is a 1/4 inch diameter pin running in a nylon self-lubricating medical grade split bearing, which means no periodic oiling on a door that gets wiped down constantly.
6) What is the difference between the Ives 711 pin and barrel hinge and a geared continuous hinge like the Pemko FM series?
Two different mechanisms. The 711 is a pin and barrel type, with knuckles running on a 1/4 inch pin and nylon split bearings, and it is a swing clear mount. Geared continuous hinges, such as the Pemko FM Series full mortise or the PemKonnect CFM/DFM modular Grade 1 hinge, use a geared channel that wraps the door edge and mortises into the door and frame. Pick the 711 when you need the leaf swung clear of the opening; pick a full mortise geared hinge when you want the hinge concealed in the door edge on a standard opening.
7) Will the Ives 711 work on a beveled edge door?
No. The 711 calls for a square edge door. A beveled leading edge changes how the hinge leaf sits against the stile face, so on a beveled door you need a hinge specified for it rather than this one.
8) Do I need to reinforce the frame before hanging a heavy door on the Ives 711?
Only if the leaf runs past 300 pounds. Up to 300 pounds the hinge carries the door with no reinforcing. Between 300 and 600 pounds, reinforcing is required, so a contractor working on a lead-lined or heavy solid core leaf should plan that prep into the frame before the hinge goes on.
9) What is a full surface continuous hinge alternative when the door edge cannot be mortised like the Ives 711 requires?
The Ives 711 requires a square edge door and mounts to the door stile's side and the frame side jamb face, with standard lengths of 83, 85, 95 and 120 inches. Where the door and frame cannot take that preparation, the Pemko DFS83HD1 PemKonnect Modular Full Surface Heavy Duty geared continuous hinge is an 83 inch Grade 1 aluminum hinge in dark bronze that lists a 1 3/4 inch door thickness, and a full surface hinge applies to the face of the door and frame rather than into the edges. Note the finish difference as well - the Ives 711 is satin stainless 630/US32D, so a dark bronze aluminum hinge will not match adjacent stainless hardware.
10) Is stainless steel or aluminum the right choice for a continuous hinge on an exterior opening?
The Ives 711 is built of stainless steel with a satin stainless finish for corrosion resistance, which is why it gets specified on high-traffic and exposed commercial openings. Among comparable continuous hinges, the Pemko DFS83HD1 is an aluminum hinge in dark bronze. Aluminum geared hinges are common on storefront and light commercial doors; stainless is the usual call where washdown, coastal air, or heavy abuse is the concern. Match the substrate to the environment and to the rest of the hardware on the opening.
11) What does a modular continuous hinge give me that the Ives 711 does not?
The Ives 711 ships as a one-piece continuous hinge in fixed standard lengths of 83, 85, 95 and 120 inches. The Pemko CFM/DFM PemKonnect Series and the Pemko DFS83HD1 PemKonnect are modular hinges, which arrive in segments rather than a single full-height piece - relevant when the hinge has to be carried into a finished space or handled by one installer. The tradeoff is the geometry: those Pemko units are geared full mortise or full surface hinges, so they will not reproduce the swing clear mounting of the Ives 711.
How fast can I get the Ives IVE-711 83 US32D delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Ives IVE-711 83 US32D come with a warranty?
Absolutely. The Ives IVE-711 83 US32D is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Ives IVE-711 83 US32D?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Ives IVE-711 83 US32D from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!