Name: Ives 8312 Plymouth Offset Curved Door Pull - 12" Heavy-Duty Commercial Grade
Brand: Ives
SKU: 8312 2 626
Price: 442.84 USD
Availability: InStock

Product Overview
FAQs

Ives Plymouth Offset Curved Door Pull - 12" Heavy-Duty Commercial Grade

Professional Offset Door Pull with Decorative Design

The Ives Plymouth Offset Curved Door Pull delivers professional-grade performance in a 12" length with distinctive offset design. Featuring a 1-7/16" maximum grip diameter for comfortable operation, this heavy-duty door pull meets ANSI A156.06 standards for commercial applications. Available with brass or stainless steel substrate options to accommodate various finish requirements, providing design flexibility for coordinated hardware suites.

Professional Features & Benefits

Optimal Grip Design: 1-7/16" maximum grip diameter provides comfortable and secure handling for all users in high-traffic applications.
Heavy-Duty Construction: Standard heavy-duty mounting hardware ensures reliable performance and long-term durability in demanding commercial environments.
Substrate Flexibility: Available with brass substrate for traditional finishes or stainless steel substrate for finishes 630 and 631, accommodating diverse design requirements.
ANSI Compliance: Meets ANSI A156.06 standards for commercial door hardware applications, ensuring code compliance and professional performance.
Coordinated Design System: Designed to coordinate with Schlage and Von Duprin lever and knob options for unified building hardware aesthetics.
Versatile Mounting Options: Standard thru-bolt installation with decorative washers, plus optional concealed and back-to-back mounting configurations available.
Professional Length: 12" overall length provides substantial grip area while maintaining proportional aesthetics for commercial door applications.

Technical Specifications

ANSI/BHMA: ANSI A156.06
Commercial/Residential: Commercial
Department: Door Hardware
Duty Level: Heavy Duty
Hang Type: Offset Hung
Product Category: Door Trim and Accessories
Product Group: Door Trim and Accessories
Product Model: 8312
Product Subgroup: Door Pulls, Push and Pull Plates
Product Substrate: Brass or Stainless Steel
Product Type: Door Pulls
Subcategory: Pulls and Push Plates

Installation & Operation

Review manufacturer specifications and verify door preparation requirements including door thickness and mounting location for proper pull placement.
Use manufacturer-provided templates to mark mounting hole locations accurately on door surfaces for thru-bolt installation.
Prepare door by drilling required holes as specified in manufacturer instructions for standard thru-bolt mounting or selected optional mounting configuration.
Install mounting hardware including thru-bolts and decorative washers, securing the pull to door per manufacturer torque specifications.
Adjust pull alignment for proper positioning and verify secure attachment throughout the mounting points.
Test pull operation to verify proper function and comfortable grip operation. Refer to manufacturer documentation for complete installation details and optional mounting configurations.

Professional Applications

Commercial Office Buildings
Educational Facilities
Healthcare Institutions
Retail Establishments
Mixed-Use Buildings
Conference Rooms and Meeting Spaces
Government and Municipal Buildings

Why Choose Ives Quality?

Ives Plymouth door pulls deliver professional-grade reliability with heavy-duty mounting hardware and ANSI A156.06 compliance for demanding commercial applications. The offset curved design combines aesthetic appeal with functional performance, while substrate options in brass and stainless steel provide finish flexibility for coordinated hardware systems. Engineered for commercial environments where dependable performance and unified design aesthetics are essential.

Manufacturer Resources

Ives Full Line Catalog

Product Specs

Product Group:: Door Trim and Accessories
Duty Level:: Heavy Duty
Subcategory:: Pulls and Push Plates
Product Subgroup:: Door Pulls, Push and Pull Plates
Product Type:: Door Pulls
ANSI/BHMA:: ANSI A156.06
Commercial/Residential:: Commercial
Hang Type:: Offset Hung
Product Model:: 8312
Product Category:: Door Trim and Accessories
Product Substrate:: Brass or Stainless Steel
Department:: Door Hardware

Ives 8312 2 626 – Frequently Asked Questions

1) Will the Ives 8312 Plymouth pull work on a standard 1-3/4 inch commercial door?

The 8312 Plymouth offset pull mounts standard with thru-bolts and decorative washers, so it goes through the door and clamps from the back side. That makes it a surface-applied pull rather than a thickness-specific assembly. Concealed and back-to-back mounting are both offered as options, and back-to-back is what you specify when a matching pull is going on the opposite face of the same opening.

2) Does the Ives 8312 meet ANSI/BHMA requirements for a commercial building?

ANSI A156.06 is the standard the 8312 Plymouth pull is built to, and it is classified commercial, heavy duty. A156.06 is the BHMA standard covering architectural door trim, which is the category a pull falls under for a spec submittal. For a facility standardizing trim across openings, that is the line you cite on the schedule.

3) What finishes does the Ives 8312 Plymouth pull come in, and will they match my existing lever hardware?

Seven finishes: 605 bright brass, 613 satin bronze oil-rubbed, 619 satin nickel, 625 bright chrome, 626 satin chrome, 630 satin stainless, and 622 matte black. The Plymouth is made to coordinate with Schlage and Von Duprin lever and knob options, so if your locks and exit devices are already 626 or 630 the pull drops into the same finish schedule. Note the substrate changes with the finish: brass substrate carries the plated finishes, stainless substrate carries 630 and 631.

4) I need pulls on both sides of the door, not just one face. What should I order instead of the 8312?

The 8312 Plymouth is thru-bolt mounted with decorative washers and back-to-back mounting is an optional configuration rather than the standard one. If you want a factory back-to-back set out of the box, the Deltana OHP620 is an off-set handle pull supplied as a back-to-back set for doors 1-1/8 inch to 1-3/8 inch thick. For a longer back-to-back offset pull, the Deltana SSPOBB24 is a 24 inch back-to-back modern offset pull, and the SSPORBB24 is the round offset version at the same 24 inch length. The Sure-Loc PL-2KN is a double-sided knurled long pull if a textured grip is wanted.

5) What is the closest equivalent to the Ives 8312 Plymouth offset pull from another manufacturer?

The ABH AB3310 is the nearest match in form: it is an offset door pull handle for commercial doors, the same offset-hung geometry as the 8312 Plymouth. If a round-end profile is preferred over the flat end, the ABH AB3330 is the offset round end pull in that same family and is offered with custom length options, which matters when the 12 inch fixed length of the 8312 does not line up with an existing hole pattern.

6) The 8312 is offset. What is the straight-profile alternative if the door has no room for an offset pull?

For a straight run rather than the offset geometry of the 8312 Plymouth, the ABH AB3300 is a straight flat end pull handle at 1.00 inch diameter, and the ABH AB7200 is a solid stainless steel flat end pull at 7/8 inch diameter with through-bolt mounting. The Deltana SSP1210 is a 12 inch contemporary pull mounted on a single side, matching the 12 inch length of the 8312 in a non-offset form. Grip diameter on the 8312 runs to 1-7/16 inch maximum, so all three sit smaller in the hand.

7) What is the grip size on the Ives 8312 Plymouth door pull?

Grip diameter maxes at 1-7/16 inches over a 12 inch overall length. That is a full-hand grip, not a fingertip pull, which is what you want on an entry or a high-traffic interior opening where people pull with a loaded hand. If you need something slimmer to the door, a 1 inch round profile like the ABH AB3300 or the 7/8 inch ABH AB7200 is the lighter-section alternative.

8) What is the difference between an offset door pull and a straight pull?

Offset means the grip steps away from the door face at an angle rather than running parallel on two straight posts, which gives more knuckle clearance and a natural wrist position when you pull. The 8312 Plymouth is offset hung with a curved profile. If you want the grip parallel to the door instead, straight-end pulls like the ABH AB3300 or the Deltana SSP1210 12 inch contemporary pull are the flat alternative in the same length class.

9) Should I put a pull and push plate on the door instead of pulls on both sides?

On a single-acting door that swings out of the corridor, standard practice is a pull on the pull side and a push plate on the push side. The 12 inch Plymouth pull pairs with a plate such as the Trimco 1001-1 heavy duty push plate at 3 x 12 inches, or the Trimco 1070 Series push/pull plates at 3-1/2 x 15 inches. Use back-to-back pulls only where the door gets pulled from both faces.

10) Is the Ives 8312 stainless steel or brass?

Both, depending on which finish you order. Satin stainless 630 is built on a stainless substrate; the plated finishes such as 605 bright brass, 613 oil-rubbed bronze, 619 satin nickel and 626 satin chrome are built on a brass substrate. It matters for coastal or wash-down environments, where a stainless-substrate 630 is the one to specify.

11) Will the Ives 8312 fit a narrow stile aluminum storefront door?

The Plymouth 8312 is a 12 inch offset pull with a 1-7/16 inch grip diameter mounted thru-bolt to the door face, so its footprint is the mounting post spacing plus the bracket base, not a slim ladder section. On narrow stile glass front doors, verify the stile width you have against the pull's mounting footprint before drilling, because an offset pull of this section wants more face area than a 7/8 inch flat-end pull like the ABH AB7200.

12) Is the Cal-Royal PUL-175 a substitute for the Ives 8312?

It is not. The Cal-Royal PUL-175 is a night latch cylinder pull at 3-1/2 inch height in stainless steel, meant to sit around a rim cylinder on a night latch opening. The 8312 Plymouth is a 12 inch offset grip pull with no cylinder cutout. Similarly, the Trimco 1035 Ultimate Restroom Pull is a heavy duty pull built for the restroom door application rather than a general 12 inch offset grip.

13) Can a push plate be used in place of the Ives 8312 pull?

No, they do the opposite job. The 8312 Plymouth is a pull for the side the door opens toward you. A push plate such as the Trimco 1001-1 heavy duty push plate at 3 inch by 12 inch or the Trimco 1041 half-round push plate at 8 inch by 16 inch goes on the push face and has nothing to grip. If you want both actions coordinated on one opening, the Trimco 1070 Series classic push/pull plates at 3-1/2 inch by 15 inch cover the pair.

How fast can I get the Ives 8312 2 626 delivered?

Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.

Can I return it if it doesn’t work for me?

Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.

Does the Ives 8312 2 626 come with a warranty?

Absolutely. The Ives 8312 2 626 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.

How do I get technical support or installation help for the Ives 8312 2 626?

You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us

Why buy the Ives 8312 2 626 from ZenSupply?

ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.

Ives 8312 Plymouth Offset Curved Door Pull - 12" Heavy-Duty Commercial Grade

Write a Review

Ives