Parts and Accessories
-
-
-
-
-
Dormakaba 7400 Series Closer Spindle for BTS Series Closer
Model: 7400
This Dorma 7400 series extended spindle inserts are used with thresholds, carpeted floors, terrazzo pans or in cases where more clearance between the door and the floor is required. For use with the Dorma BTS series closers.Dormakaba
Starting at$110.00$66.00 -
Dormakaba 7510 BTS 75V Closer Floor Plate
Model: 7510
OVERVIEW This floor plate can be used to cover and protect nearly any BTS75V closer. It will work in 3/4” or 1-1/2” offset applications as well as those that are center-hung. Its dimensions are 4-1/8” wide by...Dormakaba
$172.00$103.20 -
Dormakaba 80003 BTS Floor Closer Pre-Load Spindle - 5/16" Door Clearance
Model: 80003
OVERVIEW This Dorma 80000 series interchangeable preload spindles are for BTS center-hung, single-acting installations. Spindles have a 3 degree preload for additional pressure to hold door in the closed position. Can also be used with...Dormakaba
$110.00$66.00 -
Dormakaba 80010 BTS Floor Closer Pre-Load Spindle, 3/4" Door Clearance
Model: 80010
This Dorma 80000 series interchangeable preload spindles are for BTS center-hung, single-acting installations. Spindles have a 3 degree preload for additional pressure to hold door in the closed position. Can also be used with other...Dormakaba
$110.00$66.00 -
-
-
Dormakaba BP89 8900 Series Closer Backplate
Model: BP89
OVERVIEW This Dorma BP89 is used with 8900 series closers. It is used for top jamb mounting applications when the frame face is less than 2-7/8". Top Set of Holes Create Top Jamb Drop Application to Clear a Surface Applied Stop/Holder; Can also be Used...Dormakaba
$47.00$28.20 -
-
-
-
-
-
-
Dormakaba DP86 8600, 7000 Series Closer Drop Plate
Model: DP86
OVERVIEW DP86 - For top jamb mount with slim plastic cover to clear a surface applied stop/holder. Overhead ceiling clearance must be 1-3/4 (44 mm) or more. Permits parallel arm installation with minimum top door rail of 2-1/2 (64 mm) for non-hold open...Dormakaba
$45.00$27.00 -
Dormakaba DP89 8900 Series Closer Drop Plate
Model: DP89
OVERVIEW DP89 - For parallel arm installation of 8900 Series closers when top door rail is less than 5-3/4 (146 mm) for nonhold open and plunger hold open. When top door rail is less than 6 (152 mm) for friction applications (assuming 5/8 (16 mm) stop...Dormakaba
$42.00$25.20 -
-
-
-
-
