Locknetics NC-RAMPS NC Series Removable Ramps Replacement

NC-RAMPS is a set of removable ramps sold as a replacement part for Locknetics NC Series electric strikes. The ramps are the angled faces the latchbolt rides across as the door closes, so they are the wear surface that lets the latch seat into the keeper. If the ramps on an installed NC Series strike are worn, chipped, or were removed during a previous install, this is the piece you order rather than replacing the whole strike.

The ramps come in US32D, satin stainless steel. That is the standard commercial strike finish, so they match an NC Series strike specified in the same finish without a visible mismatch at the jamb.

The ramps are removable by design, which is why they are sold separately from the strike body. On an NC Series strike that means the wear face can be swapped as a service item instead of cutting the jamb and replacing the complete strike. Order the ramps alone when the strike body and solenoid are still working.

No. NC-RAMPS is the ramp component only, catalogued as a replacement part for NC Series strikes. If you need the complete strike, order the NC Series electric strike; if you are repairing one already in the frame, the ramps are what you want.

Yes, it is a commercial-duty part, supplied for NC Series electric strikes used on commercial openings rather than residential hardware. For a property manager or facilities buyer standardizing on NC Series strikes across a building, keeping ramps on the shelf is a common MRO stock item since they are the component that sees the most contact wear.

There is a single configuration: model NC-RAMPS in US32D. No handing, size, or voltage choice applies, since the ramps are a passive mechanical face rather than an electrified component.