You may also like
LOCKTITE CU 1HL FLAG TYPE LUG 8-4
Manufacturer Resources
Product Specs
- Country Of Origin:
- Mexico (MX)
- Product Group:
- Wire & Cable Management
- Product Type:
- Locktite Connectors
- Selling Unit Of Measure:
- each
- Standards:
- UL E9809
- Type2:
- Mechanical connectors
- Department:
- Electrical
- Product Subgroup:
- Connectors
- Product Material:
- Copper
Blackburn 31005AL – Frequently Asked Questions
1) What wire sizes does the Blackburn 31005AL Locktite lug take?
The 31005AL is an 8-4 range lug, so it accepts copper conductors from 8 AWG through 4 AWG. Anything larger than 4 AWG or smaller than 8 AWG needs a different catalog number.
2) Is the Blackburn 31005AL a copper-only lug or can I use it on aluminum conductors?
It's a copper body lug, marked CU. Use it on copper conductors only. Aluminum or dual-rated runs call for an AL9CU marked connector instead.
3) Is the Blackburn 31005AL a crimp lug or a set screw lug?
It's a mechanical connector, not a compression fitting. The Locktite design lands the conductor under a set screw, so you install it with a hex wrench and no crimp tool or die set.
4) What does flag type mean on the 31005AL lug, and when would I use it over a straight lug?
Flag type means the tongue comes off the barrel at 90 degrees rather than in line with the conductor. That lets the cable run parallel to the bus or panel wall while the pad lands flat on the terminal, which is what you want in tight gutters and shallow enclosures. If the conductor approaches the pad head on, a straight one-hole lug is the easier landing.
5) Is the Blackburn 31005AL lug UL listed?
Yes. It carries UL file E9809, which is the reference an inspector or submittal reviewer will look for on a grounding and bonding connector.
6) How many bolt holes does the 31005AL have?
One. It's a 1HL, single hole lug, so it lands with a single bolt on the pad. If your terminal or bus is drilled for two bolt NEMA spacing, you need a two hole lug instead.
7) Does the Blackburn 31005AL come in a pack or individually?
Sold each, as one lug per unit, so order the exact count you need for the job rather than working from a carton quantity. Manufactured in Mexico.
8) What part number do I order for the Blackburn 8-4 copper flag lug?
Blackburn 31005AL. That's the manufacturer part number for the Locktite copper one hole flag lug rated 8-4 AWG.
How fast can I get the Blackburn 31005AL delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Blackburn 31005AL come with a warranty?
Absolutely. The Blackburn 31005AL is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Blackburn 31005AL?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Blackburn 31005AL from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.