You may also like
LOCKTITE CU 1HL LUG OFFSET 8-2
Manufacturer Resources
Product Specs
- Country Of Origin:
- Mexico (MX)
- Product Group:
- Wire & Cable Management
- Product Type:
- Locktite Connectors
- Selling Unit Of Measure:
- each
- Standards:
- UL E9809
- Type2:
- Mechanical connectors
- Department:
- Electrical
- Product Subgroup:
- Connectors
- Product Material:
- Copper
Blackburn 35401G – Frequently Asked Questions
1) What wire sizes does the Blackburn 35401G Locktite lug accept?
The 35401G is built for the 8-2 range, meaning copper conductors from 8 AWG up through 2 AWG. If your feeder is 1 AWG or larger, this is the wrong lug and you need the next size up in the Locktite mechanical lug line.
2) Is the Blackburn 35401G a copper-only lug or can I use it on aluminum conductors?
Copper only. The 35401G body is copper and it is catalogued as a CU lug, so run it on copper conductors. For aluminum or a dual-rated run, you want an AL9CU-marked mechanical lug instead.
3) Does the 35401G lug bolt down with one hole or two?
One hole. The 1HL designation on the 35401G means a single-hole tongue, so it lands with one bolt on a bus, ground bar, or equipment pad. Two-bolt terminations on switchgear pads call for a 2-hole lug instead.
4) What does the offset tongue on the Blackburn 35401G do for me in a tight enclosure?
The offset steps the bolt pad away from the conductor barrel axis, which is what lets you land a cable on a bus or ground bar that sits above or below the cable entry without kinking the conductor. Straight-tongue lugs force the cable in line with the pad; the 35401G buys you that offset in a crowded panel or pull box.
5) Is this a mechanical set-screw lug or a compression lug I need a crimp tool for?
Mechanical. The Locktite 35401G is a set-screw type connector, so it terminates with a wrench or hex driver and needs no crimp die or hydraulic tool. That matters on service calls and retrofit work where nobody wants to carry a press.
How fast can I get the Blackburn 35401G delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Blackburn 35401G come with a warranty?
Absolutely. The Blackburn 35401G is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Blackburn 35401G?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Blackburn 35401G from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.