You may also like
LOCKTITE CU 1HL LUG OFFSET 1/0-4/0
Manufacturer Resources
Product Specs
- Country Of Origin:
- Mexico (MX)
- Product Group:
- Wire & Cable Management
- Product Type:
- Locktite Connectors
- Selling Unit Of Measure:
- each
- Standards:
- UL E9809
- Type2:
- Mechanical connectors
- Department:
- Electrical
- Product Subgroup:
- Connectors
- Product Material:
- Copper
Blackburn 35601 – Frequently Asked Questions
1) What wire sizes does the Blackburn 35601 Locktite lug accept?
The Blackburn 35601 is a one-hole copper compression-free mechanical lug sized for conductors from 1/0 through 4/0. If your conductor falls outside that range, this is the wrong lug body, pick the Locktite size that brackets your actual cable.
2) Can I use the Blackburn 35601 lug on aluminum conductors?
No. The 35601 is a copper-bodied lug specified for copper conductors only. For aluminum or dual-rated work you need a lug marked AL9CU, not this one.
3) Is the Blackburn 35601 lug UL listed for electrical work?
Yes, it carries UL file E9809, which is what an inspector or institutional spec will look for on a mechanical terminal connector.
4) What does the offset tongue on the 35601 lug actually do for me?
The offset tongue steps the pad away from the barrel axis, so the conductor clears the bus or breaker pad instead of forcing a bend right at the lug. It matters in tight gear where a straight-tongue lug would put a sharp bend in a 4/0 cable, which is a common reason a termination will not dress into the cabinet.
5) Does the Blackburn 35601 need a hydraulic crimper?
No crimp tooling required. It is a mechanical connector, so the conductor is captured by the set screw in the barrel and torqued down with a hex key or driver. That makes it practical for service and retrofit work where nobody wants to carry a die set.
6) How many lugs do I get when I order Blackburn 35601, and how do I order for a three-phase feeder?
It sells as each, one lug per unit. A three-phase feeder termination with a neutral takes four, so order by conductor count plus any ground terminations you are landing.
7) What part number should I give my distributor for this Blackburn offset lug?
Order it as Blackburn 35601. That is the manufacturer part number, and the Locktite copper one-hole offset lug covering 1/0 to 4/0. It is manufactured in Mexico.
How fast can I get the Blackburn 35601 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Blackburn 35601 come with a warranty?
Absolutely. The Blackburn 35601 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Blackburn 35601?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Blackburn 35601 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.