You may also like
LOCKTITE CU 1HL LUG OFFSET 4-2/0
Manufacturer Resources
Product Specs
- Country Of Origin:
- Mexico (MX)
- Product Group:
- Wire & Cable Management
- Product Type:
- Locktite Connectors
- Selling Unit Of Measure:
- each
- Standards:
- UL E9809
- Type2:
- Mechanical connectors
- Department:
- Electrical
- Product Subgroup:
- Connectors
- Product Material:
- Copper
Blackburn 35501G – Frequently Asked Questions
1) What wire sizes does the Blackburn 35501G Locktite lug accept?
The 35501G is rated for conductors from 4 AWG through 2/0, so one lug covers that whole range instead of stocking a separate size for each. It's a single-hole (1HL) offset tongue lug, sold one per unit.
2) Can I use the Blackburn 35501G lug on aluminum conductors?
No. The 35501G is a copper-body lug built for copper conductors (the CU designation). For aluminum or dual-rated work you need an AL9CU-marked mechanical lug instead.
3) Does the 35501G need a crimping tool, or does it bolt on?
It's a mechanical connector, not a compression lug. The conductor is captured by a setscrew, so you install it with a hex key or socket driver, no crimp tool or die set needed. That's what makes it practical for field terminations and panel changeouts where a hydraulic crimper isn't on hand.
4) Is the Blackburn 35501G UL listed for use in a panelboard or switchgear ground bar?
The 35501G carries UL file E9809. Use it within its marked conductor range of 4 AWG to 2/0 and with copper conductors only.
5) What does the "offset" mean on the 35501G lug tongue?
The tongue is offset rather than in line with the barrel, which steps the bolt pad away from the conductor axis. That's the version to use when the bus or ground bar pad sits on a different plane than the cable run, so the conductor doesn't have to be bent hard to land the bolt hole. If your pad is in line with the cable, a straight-tongue lug is the cleaner choice.
6) How many bolt holes does the Blackburn 35501G have?
One. The 1HL designation means a single bolt hole in the tongue. If your equipment pad is drilled two-hole NEMA pattern, a single-hole lug won't land correctly and you'll want a 2-hole lug in the same 4-2/0 copper range.
How fast can I get the Blackburn 35501G delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Blackburn 35501G come with a warranty?
Absolutely. The Blackburn 35501G is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Blackburn 35501G?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Blackburn 35501G from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.