You may also like
LOCKTITE CU 1HL LUG OFFSET 14-6
Manufacturer Resources
Product Specs
- Country Of Origin:
- Mexico (MX)
- Outside Diameter:
- #10
- Product Group:
- Wire & Cable Management
- Product Type:
- Locktite Connectors
- Selling Unit Of Measure:
- each
- Spacing:
- 7/32 in
- Standards:
- UL E9809, CSA 4503, CSA 7222
- Surface Finishing:
- Steel Cadmium Plated
- Type2:
- Mechanical connectors
- Department:
- Electrical
- Product Subgroup:
- Connectors
- Product Material:
- Copper
Blackburn 35301G – Frequently Asked Questions
1) What wire sizes does the Blackburn 35301G Locktite lug accept?
The 35301G is a one-hole copper mechanical lug rated for conductors from 14 AWG through 6 AWG. Anything larger than 6 AWG needs a different lug in the range; anything smaller than 14 AWG will not be captured properly by the setscrew.
2) Is the Blackburn 35301G UL listed for electrical work?
Yes. It carries UL E9809 along with CSA 4503 and CSA 7222, so it is acceptable for inspected work on both sides of the border.
3) Can I use the 35301G on aluminum conductors?
No. This is a copper-bodied lug specified for copper conductors only. For aluminum or dual-rated work you need a lug marked AL9CU or AL7CU.
4) What does the offset tongue on this Locktite lug do for me?
The offset tongue steps the pad away from the barrel axis, which lets the conductor clear a bus edge, panel wall, or an adjacent lug instead of forcing a sharp bend in the wire. If your pad sits flush with the conductor entry, a straight-tongue lug is the simpler choice.
5) What is the 7/32 in spacing figure on this Blackburn lug?
7/32 inch is the spacing dimension published for the 35301G, which is what tells you how tightly you can stack these side by side on a ground bar or bus before the bodies interfere. Useful when you are filling a bar with multiple single-hole lugs on #10 hardware.
6) Is the setscrew hardware plated for corrosion resistance?
The hardware on the 35301G is cadmium plated steel over the copper body, which is a standard indoor and general-purpose combination. For wet, coastal, or corrosive process environments, specify a lug with tin-plated or stainless hardware instead.
7) Do these Blackburn lugs come in bags or are they sold individually?
The 35301G is sold each, so you order the exact count you need for a panel or service job rather than a fixed carton quantity.
How fast can I get the Blackburn 35301G delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Blackburn 35301G come with a warranty?
Absolutely. The Blackburn 35301G is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Blackburn 35301G?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Blackburn 35301G from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.