Metallics

Anchors 1/2-13 X 2-3/4 Wedge Ancr Mech (Jar 50)

Anchors 100 3/4 x 4-3/4 Wdg SS (Jar 20)

Anchors 1/4 X 2-1/4 Wedge Ancr Mech Ga (Jar 100)

Washers 10 X 3/4 Fender St-zn (Jar 100) Special Features Features: A Larger Diameter for Greater Bearing Surface

6 x 1-1/2 in. Pan Head Square Drive Tapping Screws - Steel Zinc - 100qty Additional Notes Other sizes and quantities available by request | This type of recess has a square center opening, slightly...

10 x 1 in. Pan Head Square Drive Tapping Screws - 18-8 Stainless - 100qty Features Fastening stainless steel parts to aluminum or steel can cause a type of corrosion known as a galvanic couple in...

14 x 3/4 in. Pan Head Combo Sharp Point Tapping Screws - Steel Zinc - 100qty Additional Notes Other sizes and quantities available by request | Dimensions for #9 diameter are independent of ASME B18...

Anchors 3/4 x 8-1/2 Hx Hd Lg Dia CS St-zn (Box 5)

Anchors 125 5/8 x 3-1/2 Wdg St-zn (Jar 25)

Anchors 3/4 x 6 Hx Hd Lg Dia CS St-Gv (Box 10)

Metallics Industries Fender Washer 1/4" x 2" Steel Zinc ChromateProfessional Large Diameter Bearing Surface Hardware SolutionThe Metallics Industries Fender Washer 1/4" x 2" delivers exceptional...

Anchors 5/8 x 5 Hx Hd Lg Dia CS St-zn (Box 10)

Anchors 6--8 S-Dr Wall Ancr Zn-Lite (Jar 100)

Anchors 125 1/2 x 4-1/4 Wdg St-zn (Jar 25)

8 x 1 in. Flat Head Phillips Tapping Screws - Steel Zinc - 100qty Additional Notes Other sizes and quantities available by request | Dimensions for #9 diameter are independent of ASME B18.6...

12 x 1-1/4 in. Flat Head Phillips Tapping Screws - Steel Zinc - 100qty Additional Notes Other sizes and quantities available by request | Dimensions for #9 diameter are independent of ASME B18.6...

12 x 3/4 in. Pan Head Tri-Drive Tapping Screws - Steel Zinc - 100qty Features Made in the USA 12 Diameter, 3/4" Length Pan head with slotted, Phillips and square Drive Steel Zinc Material

8 x 15/8 in. Wafer Head Phillips Drywall Screws - Steel Zinc - 100qty Features Minimum torques are the same for stainless and steel self-drill screws. Drill time is 2.5 seconds for a 1 mm thick...

6 x 3/8 in. Flat Head Phillips Tapping Screws - 18-8 Stainless - 100qty Additional Notes Other sizes and quantities available by request | Dimensions for #9 diameter are independent of ASME B18.6...

Nuts 3/8-16 Stamp Wing Nut SS (Jar 100) Features Designed for Rapid Assembly and Disassembly by Hand Additional Notes Other sizes and quantities available by request, Does not specify dimensions...