Metallics

8 x 2 in. Pan Head Tri-Drive Tapping Screws - Steel Zinc - 100qty Features 8 Diameter, 2" Length Pan head with slotted, Phillips and square Drive Steel Zinc Material Made in the USA

Anchors 5/16 X 3 Wedge Ancr St-zn (Jar 100)

Washers 5/16 X 1-1/4 Fender SS (Jar 100) Special Features Features: A Larger Diameter for Greater Bearing Surface

6 x 2-1/2 in. Flat Head Phillips Tapping Screws - Steel Zinc - 100qty Additional Notes Other sizes and quantities available by request | Dimensions for #9 diameter are independent of ASME B18.6...

10 x 3 in. Pan Head Square Drive Tapping Screws - 18-8 Stainless - 100qty Features 10 Diameter, 3" Length Pan head with square Drive 18-8 Stainless Material Fastening stainless steel parts to...

10 x 2 in. Pan Head Square Drive Tapping Screws - Steel Zinc - 100qty Features Pan head with square Drive 10 Diameter, 2" Length Steel Zinc Material Additional Notes Other sizes and quantities...

Anchors 1/2-13 x 7 Wdg SS (Jar 25)

10-32 x 1-1/4 in. Round Head Tri-Drive Machine Screws - Steel Zinc - 100qty Features Round head with slotted, Phillips and square Drive Made in the USA 10-32 Diameter, 1-1/4" Length Steel Zinc...

Anchors 3/8 X 3-3/4 Wedge Ancr St-zn U (Jar 50)

Anchors 1/2 X 3-3/4 Wedge Ancr SS (Jar 25)

Washers 1/2 X 1-1/4 Fender Galv (Jar 100)

Anchors 1/4 X 4 Wedge Ancr SS (Jar 50)

12 x 3/4 in. Pan Head Combo Sharp Point Tapping Screws - Steel Zinc - 100qty Features 12 Diameter, 3/4" Length Steel Zinc Material Pan head with Phillips and slotted Drive Additional Notes Other...

8 x 1-1/2 in. Pan Head Square Drive Tapping Screws - Steel Zinc - 100qty Additional Notes Other sizes and quantities available by request | This type of recess has a square center opening, slightly...

8 x 1-1/2 in. Pan Head Phillips Self-Drilling & Tapping Screws - #2 Drill Point - Steel Zinc - 100qty Features Steel Zinc Material #2 Drill Point Pan Head with Phillips Drive 8 Diameter, 1-1/2"...

Anchors 125 5/8 x 4-1/2 Wdg SS (Jar 25)

14 x 1 in. 3/8 Indented Hex Head Self-Drilling & Tapping Screws with Washer - #3 Drill Point - 410 Stainless Steel - 100qty Features 14 Diameter, 1" Length Minimum torques are the same for stainless...

Anchors 3/4 X 4-1/4 Wedge Ancr St-zn (Jar 20)

Anchors 1/4 X 3-1/4 Wedge Ancr SS (Jar 50)

10 x 3/4 in. Pan Head Phillips Sharp Point Tapping Screws - Steel Zinc - 1000qty Additional Notes Other sizes and quantities available by request | Dimensions for #9 diameter are independent of ASME...