MS Sedco CP/RXM ClearPath Radi...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$139.00
$107.71
MS Sedco MS Sedco ClearPath Radio Control Multi-Mode Receiver with Sequenced Output MSS-CP/RXM

MS Sedco CP/RXM ClearPath Radio Control Multi-Mode Receiver with Sequenced Output

(No reviews yet) Write a Review

Model: CP/RXM

In Stock (leaves warehouse same day if ordered before 3pm ET)

$139.00
$107.71
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

MS Sedco CP/RXM ClearPath Radio Control Multi-Mode Receiver with Sequenced Output

The MS Sedco CP/RXM is the ClearPath's Multi-Mode Receiver Module, designed to expand the CP/RX main circuit board with a second output channel enabling Mode 3 (dual channel) and Mode 4 (sequenced output) operation. Part of the ClearPath' Radio Control Door Activation System — the most reliable wireless activation solution for automatic doors — this module supports three selectable frequencies: HDRC' (High Definition Radio Control'), 300 MHz, and 390 MHz. Its compact 4"L x 2"W x 1"H form factor makes it easy to integrate into existing installations, and FCC-licensed operation ensures regulatory compliance across commercial applications.

Key Features

  • Three Selectable Frequencies: Operates on HDRC', 300 MHz, and 390 MHz — a simple slide of a switch enables interchangeable use with all past MS Sedco products and many other manufacturers' products operating at these frequencies.
  • HDRC' Technology: High Definition Radio Control' transmits a fixed frequency signal that resists distortion from outside interference, passing through a proprietary electronic "filter" in the receiver to ensure reliable door activation where conventional RF systems may fail.
  • 5 Programming Modes: Supports Mode 1 (standard receiver), Mode 2 (adjustable time delay: 5, 10, 15, or 20 seconds), Mode 3 (dual channel receiver), Mode 4 (receiver with sequenced outputs), and Mode 5 (receiver with ratchet relay via CP/RXR module).
  • Dual Channel & Sequenced Output Capability: The CP/RXM module plugs directly onto the CP/RX main circuit board and provides a second output, enabling both Mode 3 and Mode 4 operation for advanced door activation sequencing.
  • Compact Dimensions: Measures 4"L x 2"W x 1"H for easy installation in space-constrained enclosures and control panels.
  • FCC Licensed & Backward Compatible: FCC-licensed design is compatible with previous MS Sedco devices as well as products from many other manufacturers, protecting existing system investments.
  • Interference Immunity: ClearPath' HDRC' technology solves problems caused by interference and stray signals, guaranteed to work where other RF systems won't.
  • Prewired PCB Architecture: ClearPath' transmitters share the same printed circuit board (PCB), come prewired and installed, simplifying system configuration and reducing installation time.

Certifications & Compliance

  • FCC Licensed
  • Commercial Grade

Technical Specifications

  • Type: Multi-mode receiver - Modes 3 & 4, two-output or two sequenced output with 5/10/15/20-second time delay
  • Relay Output: NO/CC/COM, rated 3A
  • Input Power: 12-24V AC/DC
  • Certification: FCC
  • Operating Temperature: -4F to 140F (-20C to 60C)
  • Housing: Blue ABS plastic

Typical Applications

  • Commercial Automatic Door Systems
  • Healthcare Facility Hands-Free Door Activation
  • Educational Institution Accessible Entry Points
  • Retail Storefront Automatic Door Control
  • Industrial and Warehouse Access Points
  • Government and Municipal Building Entrances
  • Multi-Tenant Commercial Properties with Access Control Integration

Why MS Sedco ClearPath?

MS Sedco ClearPath' receivers are engineered with proprietary HDRC' technology that delivers fixed-frequency RF transmission immune to outside interference — guaranteed to work where conventional 300 MHz and 390 MHz systems fail. The CP/RXM's plug-in module architecture and five programmable operating modes provide commercial installers with the flexibility and reliability demanded by high-traffic automatic door applications.

Product Specs

Product Group:
Electronic Access Controls
Product Subgroup:
Sensors, Switches, Relays and Timers
Product Type:
Receiver
Subcategory:
Radio Control
Commercial/Residential:
Commercial
Electronic:
Yes
Series:
300/390/HDRC Radio Control
Product Model:
CP/RXM
Product Category:
Electronic Access Controls
Department:
Door Hardware

MS Sedco CP/RXM – Frequently Asked Questions

1) Do I need the CP/RXM or the CP/RXR module for my ClearPath receiver?
They do different jobs. The CP/RXM adds a second output, which is what Modes 3 and 4 (dual channel and sequenced) need. Mode 5 runs the receiver with a ratchet relay, and that is the CP/RXR module, for latching a door open and closed on alternating presses. If you only need a single output with a plain or time-delayed activation, Modes 1 and 2 run on the CP/RX board and neither module is required.
2) I need one transmitter to trigger two doors in sequence (vestibule) - will the CP/RXM do that?
That's exactly what Mode 4 is for. The sequenced-output mode fires the two outputs in order, so one press can open the exterior door and then the interior door of a vestibule. Mode 3 instead runs the two outputs as independent channels, which is what you want when a single receiver serves two unrelated doors rather than a sequence. Both modes require the CP/RXM module on the CP/RX board.
3) What voltage does the MS Sedco CP/RXM receiver run on, and can I power it off my existing door operator?
Input power is 12-24V AC or DC, so the low-voltage accessory tap on most commercial automatic door operators will feed it directly without a separate supply. Confirm your operator's accessory output falls in that 12-24V window.
4) What is the relay rating on the ClearPath CP/RXM, and will it switch my door operator's activation input?
The relay output is NO/CC/COM rated 3A. That is a dry-contact changeover, which is what automatic door operators and low-voltage activation inputs expect, and 3A is well above the current a millivolt-level activation input draws. Do not use it to switch a motor load directly.
5) Will the CP/RXM work with the older MS Sedco 300 MHz and 390 MHz transmitters we already have in the building?
Yes. Frequency is selected by sliding a switch between HDRC, 300 MHz and 390 MHz, and that makes it interchangeable with all past MS Sedco products and many other manufacturers' products operating on those frequencies. For a property manager standardizing a mixed fleet, that means you don't have to swap every existing wall transmitter or fob to add sequenced operation.
6) Can the ClearPath CP/RXM be mounted in an unheated vestibule or an exterior warehouse entrance?
Operating range is -4F to 140F (-20C to 60C), which covers unheated vestibules, loading dock entries and warehouse openings in most climates. It is a commercial-grade device, and the ABS housing is not a weather enclosure, so mount it inside the operator header or a protected control box rather than exposed to direct weather.
7) How long does the door stay open with a ClearPath receiver, and is the delay adjustable?
Mode 2 gives a selectable time delay of 5, 10, 15 or 20 seconds, and Mode 4's sequenced outputs carry the same 5/10/15/20-second delay options. In a healthcare or accessible-entry setting where a patient or wheelchair user needs longer through the opening, you set the longer interval at the receiver instead of reprogramming the operator.
8) Is the MS Sedco ClearPath radio control FCC compliant for a government or healthcare building?
The ClearPath design is FCC licensed, and the CP/RXM module carries that FCC certification. It is a commercial-grade product used on government and municipal entrances, healthcare hands-free door activation and educational accessible entries.
How fast can I get the MS Sedco CP/RXM delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the MS Sedco CP/RXM come with a warranty?
Absolutely. The MS Sedco CP/RXM is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the MS Sedco CP/RXM?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the MS Sedco CP/RXM from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!