NGP 119N Neoprene Door Shoe wi...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$55.38
NGP 119N Neoprene Door Shoe with Mill Aluminum Construction and EPDM Rubber Seal

NGP 119N Neoprene Door Shoe with Mill Aluminum Construction and EPDM Rubber Seal

(No reviews yet) Write a Review

Model: 119N-36

In Stock (leaves warehouse same day if ordered before 3pm ET)

$55.38
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

NGP 119N Neoprene Door Shoe with Mill Aluminum Construction and EPDM Rubber Seal

Professional Door Bottom Sealing Solution

The NGP 119N Neoprene Door Shoe delivers reliable door bottom sealing with mill aluminum construction and synthetic EPDM rubber in polypropylene thermoplastic matrix. This commercial-grade door shoe features aluminum alloy 6063 T5 temper construction with exceptional temperature range performance from -81 F to 275 F. BHMA certified to ANSI/BHMA A156.22 performance tests for heat and cold, ensuring dependable weatherproofing in demanding applications.

Professional Features & Benefits

  • Temperature Performance: Operates reliably from -81 F to 275 F for extreme weather applications and climate variations.
  • Heavy-Duty Construction: Aluminum alloy 6063 T5 temper provides exceptional durability and structural integrity for commercial installations.
  • Advanced Seal Material: Synthetic EPDM rubber in polypropylene thermoplastic matrix delivers superior abrasion resistance, tensile strength and memory retention.
  • Weather Resistance: Flame-resistant and moisture-resistant design with excellent resistance to ozone, sunlight and aging for long-term performance.
  • Adjustable Installation: Slotted screw holes allow for precise positioning and alignment during installation for optimal sealing performance.
  • Complete Hardware Package: Includes #6 x 3/4" stainless steel SMS screws for secure mounting and corrosion resistance.
  • BHMA Certification: Certified to ANSI/BHMA A156.22 performance tests for heat and cold ensuring compliance with industry standards.
  • Professional Finish: Mill aluminum finish with black EPDM rubber seal provides clean appearance suitable for commercial applications.

Technical Specifications

  • Commercial/Residential: Commercial
  • Department: Door Hardware
  • Product Category: Door Trim and Accessories
  • Product Group: Door Trim and Accessories
  • Product Subgroup: Door Bottom Sweeps and Door Shoes
  • Product Type: Door Shoes
  • Series: Neoprene Door Shoe Series
  • Subcategory: Gaskets & Weatherstripping

Professional Applications

  • Commercial Office Buildings
  • Educational Facilities
  • Healthcare Institutions
  • Retail Establishments
  • Industrial and Warehouse Facilities
  • Multi-Tenant Residential Properties
  • Government and Municipal Buildings

Weatherized Construction

The NGP 119N features moisture-resistant and flame-resistant construction with synthetic EPDM rubber designed for excellent resistance to ozone, sunlight and aging. The advanced material composition ensures reliable sealing performance in exterior applications and varying environmental conditions.

Why Choose NGP Quality?

NGP door shoes deliver professional-grade reliability with aluminum alloy 6063 T5 temper construction and synthetic EPDM rubber rated for -81 F to 275 F temperature performance. BHMA certified to ANSI/BHMA A156.22 performance standards for heat and cold testing. Engineered for demanding commercial applications where dependable weatherproofing and door bottom sealing is essential.

Product Specs

Product Group:
Door Trim and Accessories
Series:
Neoprene Door Shoe Series
Product Subgroup:
Door Bottom Sweeps and Door Shoes
Product Type:
Door Shoes
Subcategory:
Gaskets & Weatherstripping
Commercial/Residential:
Commercial
Product Category:
Door Trim and Accessories
Department:
Door Hardware

NGP 119N-36 – Frequently Asked Questions

1) Will the NGP 119N door shoe seal an exterior door in a cold climate?
The 119N is built for it. The EPDM seal is rated from -81 F to 275 F, and the shoe is BHMA certified to ANSI/BHMA A156.22 performance tests for heat and cold. The synthetic EPDM in a polypropylene thermoplastic matrix resists ozone, sunlight and aging, so it holds up on a south-facing exterior opening as well as a freezer-adjacent one.
2) What lengths does the NGP 119N neoprene door shoe come in, and which one do I order for a 36 inch door?
Two lengths are made: 36 inch and 48 inch. A standard 36 inch commercial door leaf takes the 36 inch piece. For a 42 or 48 inch leaf, order the 48 inch and cut it down. Aluminum extrusion cuts clean with a miter saw and a non-ferrous blade, and the EPDM insert trims with a utility knife.
3) My exterior door gets driving rain, do I need a door shoe with a rain drip?
The 119N is a straight neoprene shoe with no drip cap, so water running down the door face reaches the threshold and can track inside. On an exposed opening with no overhang, use a shoe with an integral drip instead. The Pemko 211V is L-shaped with a rain drip, and the Pemko 215 pairs a rain drip with a UL10C certification if the door is also fire rated.
4) Can an NGP 119N door shoe be used on a fire-rated opening?
The NGP 119N is certified to ANSI/BHMA A156.22 performance tests for heat and cold, which is a weather and temperature performance certification, not a fire door label. When the drawing calls for a fire-rated door bottom shoe, specify one built for it: the Pemko 210 is a fire-rated door bottom shoe with an Eco-V insert in 36 inch aluminum construction, and the Pemko 215 is a fire-rated door shoe with a rain drip and Eco-V insert carrying UL10C certification. For a healthcare or education corridor where the opening is part of a rated assembly, the 210 or 215 is the correct part; the 119N belongs on the unrated exterior and service doors.
5) What is the closest equivalent to an NGP 119N door shoe from another brand?
The Cal-Royal DS-403 is the nearest straight equivalent: it is an aluminum door shoe with a vinyl insert, matching the 119N's basic form of an aluminum extrusion carrying a flexible bottom seal. The difference is in the seal material. The 119N uses a synthetic EPDM rubber in a polypropylene thermoplastic matrix rated from -81 F to 275 F, while the DS-403 carries a vinyl insert. On the Pemko side, the 209 is also a door bottom shoe and lists a 1/2 inch by 1-3/8 inch profile with an Eco-V vinyl insert. If an exterior opening sees hard temperature swings, the EPDM on the 119N is the material to reach for; for a straightforward interior sweep replacement the vinyl-insert shoes cover the same job.
6) Which door shoe should be used on an exterior door that takes driving rain?
For an opening exposed to wind-driven rain, choose a shoe with an integral rain drip rather than a plain shoe. The Pemko 211V is an L-shaped door shoe with a rain drip and a GREENGUARD Gold certified Eco-V insert, and the Pemko 215 pairs a rain drip with an Eco-V insert and UL10C certification. The NGP 119N is a plain mill aluminum shoe with a black EPDM seal and no rain drip in its profile; its EPDM is flame resistant, moisture resistant and rated for ozone, sunlight and aging resistance from -81 F to 275 F, so it holds up outdoors but sheds water off the door face rather than kicking it clear. On a canopy-protected or sheltered exterior door the 119N is sufficient; on a fully exposed elevation, the rain drip shoes do more.
7) Can I adjust the height of an NGP 119N after it is mounted, or is the position fixed?
Adjustable. The 119N has slotted screw holes, so you can set the shoe up or down on the door face to dial in seal contact with the threshold before you tighten. That matters on an out-of-square opening or where the floor slopes, because a door shoe that is set too low drags and wears the seal out fast.
8) Does the NGP 119N door shoe come with mounting screws?
Yes, #6 x 3/4 inch stainless steel sheet metal screws ship with the shoe. Stainless matters on an exterior opening where plated screws would bleed rust down the door face. Note the 3/4 inch length is sized for sheet metal or wood door faces, not for through-bolting.
9) Is the NGP 119N seal EPDM or vinyl, and does that matter?
EPDM, in a polypropylene thermoplastic matrix. That is the difference between the 119N and the vinyl-insert shoes ZenSupply carries, like the Cal-Royal DS-403 or the Pemko 209 with its Eco-V insert. EPDM is the one you want where the seal sees ozone, UV and hard temperature swings, since it is specified here for abrasion resistance, tensile strength and memory retention over a -81 F to 275 F range. Vinyl inserts are the common choice on interior and light-duty exterior openings.
10) What is the difference between an NGP 119N and a Pemko 211V door shoe?
They mount in the same place on the door bottom but have different profiles and seal materials. The Pemko 211V is L-shaped and includes a rain drip, with a GREENGUARD Gold certified Eco-V insert - relevant where a project is chasing low-emitting materials credits. The NGP 119N is a mill aluminum shoe in 6063 T5 alloy with a synthetic EPDM rubber seal rated -81 F to 275 F, certified to ANSI/BHMA A156.22 for heat and cold, with slotted screw holes for alignment adjustment and #6 x 3/4 inch stainless steel sheet metal screws in the box. A specifier working to an environmental product requirement looks at the 211V; one working to a temperature and weather performance spec looks at the 119N.
11) Is a Pemko 209 door shoe a drop-in replacement for an NGP 119N?
Not automatically - they are the same category of part but not the same profile. The Pemko 209 is a door bottom shoe published at a 1/2 inch by 1-3/8 inch profile with an Eco-V vinyl insert. The NGP 119N is a mill aluminum shoe with a black EPDM rubber seal and slotted screw holes, offered in 36 inch and 48 inch lengths. Before swapping either direction, measure the existing shoe's leg height and face width against the target profile and confirm the undercut still clears the threshold, since a taller or deeper extrusion changes where the seal contacts. Length is the other check: cut to the door width, working from the 36 inch or 48 inch stock on the 119N.
12) For standardizing door bottom shoes across a facility, does one part cover both rated and unrated openings?
No single shoe in this family covers everything, so most facilities carry two. The Pemko 210 is a fire-rated door bottom shoe with an Eco-V insert in 36 inch aluminum construction, and the Pemko 215 adds a rain drip to a fire-rated shoe with UL10C certification - those handle openings in rated assemblies. The NGP 119N covers the unrated exterior and service doors, with 6063 T5 mill aluminum, an EPDM seal rated -81 F to 275 F, and ANSI/BHMA A156.22 certification for heat and cold, in 36 inch and 48 inch lengths. A practical stocking split for an MRO crib is one rated shoe for labeled doors and the 119N for the rest, with the 48 inch length covering wider leaves without splicing.
13) Does an NGP 119N door shoe substitute for a UL10C rated door shoe?
No. UL10C is a positive pressure fire test standard, and the Pemko 215 is the shoe in this group that carries it, as a fire-rated door shoe with a rain drip and Eco-V insert. The NGP 119N's certification is ANSI/BHMA A156.22 for heat and cold performance, which speaks to weather sealing rather than fire endurance. An inspector looking at a labeled opening will look for the rated part, so the 215 or the fire-rated Pemko 210 is the specification there. The 119N is a commercial weatherseal shoe for unlabeled doors.
14) Will the mill aluminum finish on the NGP 119N match the other door bottoms in my building?
Mill aluminum with a black EPDM seal is the standard unfinished aluminum look, and it is what most commercial door shoes and thresholds are supplied in, so it lines up visually with existing aluminum gasketing on adjacent openings. If your existing shoes were specified in dark bronze or anodized black, the 119N in mill will read lighter next to them.
15) Is the NGP 119N rated for commercial traffic or is it a residential part?
Commercial. The 119N is specified for office buildings, schools, healthcare facilities, retail, industrial and warehouse space, multi-tenant residential and government buildings, and the housing is 6063 T5 aluminum rather than a light residential extrusion. For a facility standardizing across many openings, it is a single part number in two lengths.
16) Is the seal on an NGP 119N flame resistant?
The EPDM seal material is flame resistant and moisture resistant. That is a material property of the gasket, not a fire door assembly rating, so on a labeled opening you still need a shoe listed for fire door use.
17) What is the simpler option if a vinyl insert is all the opening needs?
The Cal-Royal DS-403 is an aluminum door shoe with a vinyl insert and is the plainer choice where the seal is doing routine work on an interior or sheltered door. The Pemko 209 is likewise a door bottom shoe with an Eco-V vinyl insert at a 1/2 inch by 1-3/8 inch profile. The NGP 119N's added content is in the seal and the certification: synthetic EPDM rubber in a polypropylene thermoplastic matrix for abrasion resistance, tensile strength and memory retention, rated -81 F to 275 F and BHMA certified to ANSI/BHMA A156.22 for heat and cold. If the door never sees weather or temperature extremes, a vinyl-insert shoe does the sealing; if it does, the EPDM is what the 119N is for.
How fast can I get the NGP 119N-36 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the NGP 119N-36 come with a warranty?
Absolutely. The NGP 119N-36 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the NGP 119N-36?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the NGP 119N-36 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!