The PVC DWV sanitary street tee features a spigot x hub x hub connection and a flowing sweep to aid in the evacuation of waste and used fluids. The tee allows for a connection to be made in continuous pipeline and branch out to a different direction. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. Polyvinyl chloride (PVC) is the most frequently specified of all thermoplastic materials because of its light weight, durability, and cost-effectiveness. PVC DWV is easy to install and is joined by solvent cementing or threading. PVC fittings exhibit high corrosion and chemical resistance and will not rust, scale, pit or corrode. NIBCO® plastic fittings are backed by a 5-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Plastic Fittings Installation Instructions
- Maximum service temperature 140-DegreeF
- Do not test or use with compressed air or other gases
- ASTM D2665 and D3311
- NSF/ANSI Standard 14
- NSF U.P. Certified
Plastic Fittings Installation Instructions
Manufacturer Resources
Product Specs
- All Application(s):
- DWV Drain / Waste / Vent
- All Basic Material:
- PVC - Polyvinyl Chloride
- Classification:
- PVC DWV Tees
- End Connection:
- Solvent Weld
- Pipe Schedule:
- 40
- Plastic End Connection Type:
- Spg x Hub x Hub
- Product Group:
- Fitting
- Product Type:
- PVC DWV Tees
- System Use:
- Commercial Plumbing, Residential Plumbing
- Product Subgroup:
- Tee
- Department:
- Plumbing
- Product Color:
- White
Nibco K103050 – Frequently Asked Questions
1) What does the Spg x Hub x Hub end configuration on a Nibco 4811-2 sanitary tee actually mean for how I plumb it in?
One end is a spigot, meaning it is sized like pipe and slips into the hub of another fitting. The other two openings are hubs that accept pipe. So the 4811-2 street tee lets you go fitting-to-fitting on the spigot side without cutting a short nipple of pipe, which is what saves you room in a tight joist bay or behind a wall. All three joints are solvent weld on Schedule 40 PVC DWV.
2) Which reducing sizes does the Nibco 4811-2 sanitary street tee come in for tying a 1-1/2 inch branch into a 2 inch drain?
Two options cover that. The 2 x 2 x 1-1/2 (MPN K103080 is 2 x 1-1/2 x 1-1/2) reduces on the branch, and K103060 is the 2 x 2 x 1-1/2. If the run itself steps down, K103070 is 2 x 1-1/2 x 2. Straight sizes are 1-1/2, 2, 3 and 4 inch, and the larger reducers are 3 x 3 x 2, 3 x 3 x 1-1/2 and 4 x 4 x 2.
3) Does the Nibco 4811-2 PVC DWV tee meet code for a permitted commercial job?
It is made to ASTM D2665 and D3311, carries NSF/ANSI Standard 14, and is NSF U.P. Certified, which is the drain-waste-vent listing inspectors look for. Nibco lists it for both commercial and residential plumbing.
4) Will a Nibco 4811-2 street tee solvent weld to the ABS drain pipe already in the building?
No. This is white PVC, and PVC cement will not bond PVC to black ABS. If you are tying new PVC into existing ABS, make the transition with a mechanical coupling or a listed transition cement at the joint, and keep the 4811-2 on the PVC side of that connection.
5) Is a sanitary tee the right fitting for my drain, or do I need a wye?
A sanitary tee has a curved sweep on the branch to carry waste into the flow direction, which is what makes it correct for a vertical drop, like a vent takeoff or a fixture branch entering a stack. On horizontal-to-horizontal drainage most codes want a wye and eighth bend instead, because the sanitary tee's sweep is too abrupt lying flat. The 4811-2 is the street version, so use it where the spigot end plugs straight into another fitting's hub.
6) How is the Nibco PVC DWV sanitary tee joined, and do I need threads or a gasket?
Solvent weld, all three connections. You prime and cement pipe into the two hubs, and the spigot end cements into the hub of the next fitting. No gaskets, no threads, no torque, and nothing else ships with the fitting. Nibco notes PVC DWV can also be threaded, but the 4811-2 itself is a cement joint fitting.
7) What part number do I order for a 3 inch Nibco sanitary street tee?
The straight 3 inch is MPN K103160. If the branch is smaller, K103150 is 3 x 3 x 2 and K103200 is 3 x 3 x 1-1/2. Straight 4 inch is K103250, straight 2 inch is K103050, and straight 1-1/2 inch is K103000.
8) Will PVC DWV tees corrode or scale in a waste line the way metal drain fittings do?
PVC will not rust, scale, pit or corrode, and it holds up to chemical attack from ordinary waste. That is the main reason facilities standardize on it over galvanized in drain and vent work. Keep the line under 140 degrees F service temperature.
How fast can I get the Nibco K103050 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Nibco K103050 come with a warranty?
Absolutely. The Nibco K103050 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Nibco K103050?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Nibco K103050 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.