You may also like
The ABS DWV sewer and drain adapter features a hub x sewer and drain connection and connects ABS DWV pipe and sewer and drain pipe. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span. ABS is lightweight, safe to handle and easy to install. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings. NIBCO® plastic fittings are backed by a 5-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
Plastic Fittings Installation Instructions
- Service temperature -40-DegreeF to 180-DegreeF
- Do not test or use with compressed air or other gases
- CSA B181.1
- ASTM D2665
- ASTM D3965
- ASTM D2661 and D3311
- UL Listed 94V-0
- NSF/ANSI Standard 14
- NSF U.P. Certified
Plastic Fittings Installation Instructions
Manufacturer Resources
NIBCO Plastic Fittings Catalog
Product Specs
- All Application(s):
- DWV Drain / Waste / Vent
- All Basic Material:
- ABS - Acrylonitrile Butadiene Styrene
- Classification:
- ABS DWV Adapters
- End Connection:
- Solvent Weld
- Pipe Schedule:
- 40
- Plastic End Connection Type:
- Hub x Sewer & Drain
- Product Group:
- Fitting
- Product Type:
- ABS DWV Adapters
- System Use:
- Commercial Plumbing, Residential Plumbing
- Type of Adapter:
- Reducing Size;Sewer & Drain
- Product Subgroup:
- Adapter
- Department:
- Plumbing
- Product Color:
- Black
- Product Length:
- 4.58 in
- Product Weight:
- 0.362 lb
- Country Of Origin:
- United States
- Product Width:
- 4.58 in
- Product Height:
- 3.82 in
Nibco I009120 – Frequently Asked Questions
1) What does the Nibco 5800-SD adapter actually connect?
It joins ABS DWV pipe to sewer and drain (SD) pipe. One end is a hub that takes ABS DWV, the other is a sewer and drain socket, so it is the transition you use where a building drain in Schedule 40 ABS DWV meets SD-wall pipe underground. Both ends are solvent weld, not threaded.
2) What pipe size is the Nibco 5800-SD sewer and drain adapter?
It is a 3 inch by 4 inch reducing adapter: 3 inch ABS DWV hub to 4 inch sewer and drain. That is the common step where 3 inch ABS stack or building drain ties into 4 inch SD pipe headed for the main.
3) Can I solvent cement this ABS adapter straight to PVC pipe?
No. The 5800-SD is ABS and is intended to be solvent cemented to ABS DWV pipe. For a change of material, use a transition fitting; Nibco notes ABS DWV can be connected to steel, copper, or cast iron through transition fittings rather than direct cement.
4) Does the Nibco 5800-SD meet code for a commercial DWV system?
It carries NSF/ANSI Standard 14 and is NSF U.P. Certified, and is manufactured to ASTM D2661, D2665, D3311 and D3965 along with CSA B181.1. It is also UL Listed 94V-0 for flammability. The fitting is listed for both commercial and residential plumbing use.
5) What temperature range can this ABS DWV fitting handle?
Service temperature runs -40 F to 180 F, which covers normal drain, waste and vent duty including intermittent hot discharge from a dishwasher or laundry. It is drainage only, and Nibco states it is not to be tested or used with compressed air or other gases.
6) Can I use the 5800-SD on a pressure or water supply line?
No. It is a drain, waste and vent fitting only, non-pressure drainage service. Do not put it on potable supply, and do not pressure test it with compressed air or other gases.
7) What do I need besides the fitting to install it?
ABS solvent cement, since both ends of the 5800-SD are solvent weld sockets rather than threaded. No gaskets or clamps are part of the fitting. Nibco publishes plastic fittings installation instructions for cure and set times.
8) Will this match the black ABS already in my building?
Yes, the 5800-SD is black ABS, the standard color for ABS DWV, so it blends with existing black ABS drain lines. If your building is white PVC DWV throughout, this is the wrong material for that system.
9) What is the Nibco part number for the 3 x 4 sewer and drain adapter?
Nibco lists the 3 inch by 4 inch 5800-SD hub x sewer and drain adapter under MPN I009120.
How fast can I get the Nibco I009120 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Nibco I009120 come with a warranty?
Absolutely. The Nibco I009120 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Nibco I009120?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Nibco I009120 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.