You may also like
NON-INS BTT SPLCE No6 AWG LEN 1.12
Manufacturer Resources
Product Specs
- Country Of Origin:
- Mexico (MX)
- Product Subgroup:
- Splices
- Product Type:
- Non-Insulated Butt Splice
- Standards:
- UL E9809
- Temperature Range:
- 150 °C
- Voltage Rating:
- 600 V
- Department:
- Electrical
- Product Group:
- Wire Termination
- Product Color:
- Metallic
- Product Material:
- Copper
Sta-Kon EE2 – Frequently Asked Questions
1) What wire size does the Sta-Kon EE2 butt splice take?
The EE2 is sized for No. 6 AWG conductor on both ends. It is a straight butt splice, so it joins two 6 AWG wires end to end, one into each barrel. If your conductors are a different gauge, you need a different Sta-Kon number; crimping an undersized or oversized wire into a 6 AWG barrel gives you a connection that will not hold mechanically or electrically.
2) Is the EE2 splice insulated, or do I have to insulate it myself?
It is a non-insulated splice, bare copper with a metallic finish. You cover it after crimping, with heat shrink tubing or tape, or you land it inside an enclosure where insulation is not required. Buyers who want the covering built in should look for an insulated or nylon butt splice instead.
3) Can I use a non-insulated butt splice on a 480V circuit?
The EE2 carries a 600 V rating, so it covers 120, 208, 240, 277 and 480 V work. Because the barrel is bare, the insulation around it is what you are relying on at that voltage, so the heat shrink or tape you apply has to be rated for the circuit as well.
4) Will this splice hold up in a high-heat location like a motor junction box or a light fixture?
Yes. The EE2 is rated to 150 degrees C, which is why a bare copper splice is often specified in fixture whips, motor terminal boxes and other hot enclosures where an insulated barrel would be the limiting part. Pair it with high-temperature wire and sleeving so the whole splice matches the location.
5) Can I use the EE2 on aluminum conductors?
No. The EE2 barrel is copper and is intended for copper conductors. Aluminum requires a connector marked AL or AL9CU along with the appropriate inhibitor compound, so use a dedicated aluminum or dual-rated splice for those runs.
6) What is the overall length of the EE2 splice barrel?
The EE2 measures 1.12 inches in length overall. That matters when you are splicing inside a tight box or raceway, since you need straight conductor room for the full barrel plus the insulation you add over it.
7) Do I order the Sta-Kon EE2 by any other part number?
EE2 is the manufacturer part number for this Sta-Kon non-insulated 6 AWG butt splice, and it is the single configuration offered, so there is no finish, color or packaging option to specify when ordering.
8) Where is the Sta-Kon EE2 made?
Country of origin is Mexico. Procurement buyers tracking origin for contract or federal paperwork should record it as MX.
How fast can I get the Sta-Kon EE2 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Sta-Kon EE2 come with a warranty?
Absolutely. The Sta-Kon EE2 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Sta-Kon EE2?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Sta-Kon EE2 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.