You may also like
NON-INS FLAG TERM, 4, 1/2, METALLIC
Manufacturer Resources
Product Specs
- Country Of Origin:
- United States (US)
- Product Subgroup:
- Flag Terminals
- Product Type:
- Non-Insulated Flag Terminal
- Standards:
- UL E9809
- Voltage Rating:
- 600 V
- Wire Size:
- 4 AWG
- Department:
- Electrical
- Product Group:
- Wire Termination
- Product Color:
- Metallic
- Product Material:
- Copper
Sta-Kon M675 – Frequently Asked Questions
1) What wire size does the Sta-Kon M675 flag terminal take?
The M675 is built for 4 AWG conductor. It is a single-size barrel, so 2 AWG or 6 AWG wire will not crimp correctly in it; match the terminal to the actual conductor, not the breaker size.
2) Is the Sta-Kon M675 rated for 600 volt circuits?
Yes, it carries a 600 V rating and is UL listed under file E9809. That covers the usual commercial and industrial power work, 120/208, 277/480, motor feeders and control panels.
3) Can I use the M675 on aluminum conductor?
No. It is a copper terminal and should be used on copper conductor only. For aluminum feeders you need a terminal or lug specifically marked AL or AL9CU, installed with the compound the maker calls for.
4) Is this flag terminal insulated, and do I need to sleeve it after crimping?
It is a non-insulated copper terminal, bare metal barrel and tongue. On any live 600 V application you finish the termination yourself with heat shrink or tape per your installation practice. The upside of bare is that you can inspect the crimp and the conductor seating before you cover it.
5) Why use a flag terminal instead of a standard straight ring terminal?
A flag terminal puts the tongue at a right angle to the wire barrel, so the conductor runs parallel to the mounting surface instead of straight into it. Electricians reach for it in shallow enclosures, tight motor peckerhead boxes, and crowded panel gutters where a straight 4 AWG lug would need more bend radius than the box allows. If you have room to bring the wire in head-on, a straight ring terminal is the simpler part.
6) Is this terminal made in the USA? We have a Buy American requirement on the job.
Country of origin on the Sta-Kon M675 is the United States, which is what government, school, and transit procurement specs usually want documented for domestic-content clauses.
7) Is the M675 a crimp terminal or a set screw lug?
Crimp. The barrel is compressed onto the conductor with a tool sized for 4 AWG non-insulated terminals, so there is no set screw to retorque later. Use a die set rated for the terminal and conductor size; hand pliers do not produce a listed crimp.
How fast can I get the Sta-Kon M675 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Sta-Kon M675 come with a warranty?
Absolutely. The Sta-Kon M675 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Sta-Kon M675?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Sta-Kon M675 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.