You may also like
NON-INS PRL SPLICE, 12-10, CMA 5,18
Manufacturer Resources
Product Specs
- Country Of Origin:
- United States (US)
- Product Subgroup:
- Splices
- Product Type:
- Non-Insulated Parallel Splice
- Standards:
- UL E9809
- Voltage Rating:
- 600 V
- Department:
- Electrical
- Product Group:
- Wire Termination
- Product Color:
- Metallic
- Product Material:
- Copper
Sta-Kon C10-PS-D – Frequently Asked Questions
1) What wire sizes does the Sta-Kon C10-PS-D parallel splice take?
The C10-PS-D is sized for 12-10 AWG copper conductors. Both wires enter from the same end and run parallel inside the barrel, so it is for joining two same-direction conductors rather than butting two wires end to end. Stay inside the 12-10 AWG range; a 14 AWG conductor will not crimp reliably in this barrel.
2) Does the Sta-Kon C10-PS-D need to be insulated after crimping?
Yes. It is a non-insulated splice, bare copper with a metallic finish and no sleeve, so the joint has to be insulated after you crimp it, typically with heat shrink or tape rated for the circuit. Buyers who do not want that extra step should choose an insulated splice instead.
3) Can I use the C10-PS-D on aluminum wire?
No. The barrel is copper, so it is intended for copper conductors only. Aluminum conductors need a connector rated AL or AL9CU with the appropriate inhibitor compound; crimping aluminum into a copper-only barrel creates a dissimilar metal joint.
4) Is a parallel splice the same thing as a butt splice, and when do I use each?
Not the same. A parallel splice like the Sta-Kon C10-PS-D takes both conductors in from one side and runs them alongside each other in a single barrel, which is what you want for a tap or a pigtail where both wires head the same direction. A butt splice has a barrel open at each end and joins two wires running opposite directions in line. If you are extending a run, you want a butt splice; if you are bundling two leads into one point, this is the right part.
5) What voltage can this Sta-Kon splice be used on?
600 V is the rating on the C10-PS-D, which covers standard commercial and industrial branch circuits, control wiring, and motor leads. That rating applies once the crimped barrel is properly insulated, since the splice itself ships bare.
6) Is the Sta-Kon C10-PS-D UL listed for institutional and inspected work?
It carries UL file E9809. For an MRO or facilities buyer standardizing terminations across a building, that plus the 600 V rating is what an inspector will look for on the component itself; the completed splice still has to be insulated to the circuit's requirement.
7) What part number do I order for the Sta-Kon 12-10 AWG non-insulated parallel splice?
Order Sta-Kon C10-PS-D. That is the manufacturer part number and the only model configuration of this 12-10 AWG non-insulated parallel splice.
8) Is the Sta-Kon C10-PS-D made in the USA?
Country of origin on the C10-PS-D is the United States, which matters if you are buying under domestic-sourcing requirements on government or institutional work.
How fast can I get the Sta-Kon C10-PS-D delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Sta-Kon C10-PS-D come with a warranty?
Absolutely. The Sta-Kon C10-PS-D is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Sta-Kon C10-PS-D?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Sta-Kon C10-PS-D from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.