You may also like
NON-INS PRL SPLICE, 2, CMA 52,600-8
Manufacturer Resources
Product Specs
- Country Of Origin:
- Mexico (MX)
- Product Subgroup:
- Splices
- Product Type:
- Non-Insulated Parallel Splice
- Standards:
- UL E9809
- Voltage Rating:
- 600 V
- Department:
- Electrical
- Product Group:
- Wire Termination
- Product Color:
- Metallic
- Product Material:
- Copper
Sta-Kon G2-PS-W – Frequently Asked Questions
1) Is the Sta-Kon G2-PS-W parallel splice insulated, or do I have to insulate it myself?
The G2-PS-W is a non-insulated parallel splice, so the barrel is bare copper. You insulate it after crimping with heat shrink or tape rated for the circuit. It is rated 600 V, so whatever you cover it with should match that.
2) What voltage can a Sta-Kon G2-PS-W splice be used on?
Rated 600 V, which covers standard commercial and industrial branch circuits, panel feeders, motor leads and control wiring. It is UL recognized under file E9809.
3) What does a parallel splice do that a butt splice doesn't?
A parallel splice joins two conductors running the same direction, both entering the barrel from the same end, so the finished joint doubles back alongside the run. A butt splice joins two conductors end to end from opposite ends of the barrel. The G2-PS-W is the parallel type, so pick it when you are tapping or paralleling two leads side by side rather than extending a single run.
4) Does the G2-PS-W splice need a special crimp tool?
Non-insulated copper splices like the G2-PS-W are crimped with a bare-terminal (non-insulated) die set, not the color-coded insulated-terminal nest. The barrel is solid copper with no sleeve to compress, so using an insulated-terminal die can under-crimp the joint. Match your crimper die to the conductor size you are terminating.
5) Will the Sta-Kon G2-PS-W splice corrode in a damp electrical room or outdoor enclosure?
The barrel is bare copper with a metallic finish and no insulation or jacket, so it has no environmental protection on its own. In damp, outdoor or washdown locations, seal the finished crimp with adhesive-lined heat shrink or house it in a gasketed enclosure.
6) What is the exact part number and manufacturer for this Sta-Kon parallel splice?
Sta-Kon, manufacturer part number G2-PS-W. It is a single-model item, made in Mexico.
How fast can I get the Sta-Kon G2-PS-W delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Sta-Kon G2-PS-W come with a warranty?
Absolutely. The Sta-Kon G2-PS-W is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Sta-Kon G2-PS-W?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Sta-Kon G2-PS-W from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.