You may also like
NON-INS PRL SPLICE, 4, CMA 33,100-5
Manufacturer Resources
Product Specs
- Country Of Origin:
- Mexico (MX)
- Insulation Material:
- None
- Product Subgroup:
- Splices
- Product Type:
- Non-Insulated Parallel Splice
- Standards:
- UL E9809
- Department:
- Electrical
- Product Group:
- Wire Termination
- Product Color:
- Metallic
- Product Material:
- Copper
Sta-Kon F4-PS-W – Frequently Asked Questions
1) Is the Sta-Kon F4-PS-W parallel splice insulated, or do I need to tape or heat-shrink it after crimping?
The F4-PS-W is a non-insulated splice, with no insulation material on the barrel at all. Bare metallic copper, so whatever insulation the connection needs has to be added after the crimp, typically heat shrink tubing or tape sized to the finished barrel. If you would rather the insulation come built in, you need an insulated parallel splice instead of this one.
2) What is a parallel splice used for versus a butt splice?
A parallel splice like the Sta-Kon F4-PS-W takes two conductors entering the barrel from the same side, running alongside each other, which is what you want for a tap or a pigtail where both wires come from one direction. A butt splice joins two conductors end to end from opposite ends of the barrel. They are not interchangeable: if your two wires come at the joint from opposite directions, a butt splice is the right part.
3) What material is the F4-PS-W splice barrel, and can I use it on aluminum conductors?
The barrel is copper, finished metallic with no plating color called out. Copper-only splices are intended for copper conductors; aluminum and copper-to-aluminum connections require a connector specifically rated AL or AL9CU, so the F4-PS-W is not the part for an aluminum feeder.
4) Do I need a special crimp tool for a Sta-Kon non-insulated splice?
Non-insulated barrels crimp with a non-insulated (uninsulated) die or nest, not the color-coded insulated-terminal jaws. Because the F4-PS-W has no insulation sleeve, using an insulated-terminal crimper will not form the barrel correctly. Match the tool and die to the barrel size for the conductors you are joining.
5) What is the exact part number and manufacturer for ordering this non-insulated parallel splice?
Order it as Sta-Kon F4-PS-W. That is the manufacturer part number for the non-insulated parallel splice, and it is made in Mexico. Only the one model is offered under that number, so there are no finish or size options to pick on the order.
How fast can I get the Sta-Kon F4-PS-W delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Sta-Kon F4-PS-W come with a warranty?
Absolutely. The Sta-Kon F4-PS-W is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Sta-Kon F4-PS-W?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Sta-Kon F4-PS-W from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.