You may also like
NON INS TUB RING TERM 8,3/8 BOLT SP
Manufacturer Resources
Product Specs
- Country Of Origin:
- Mexico (MX)
- Product Subgroup:
- General Terminals
- Product Type:
- Non-Insulated Ring Terminal
- Wire Size:
- 8/8AN
- Department:
- Electrical
- Product Group:
- Wire Termination
- Product Color:
- Silver
- Product Material:
- Copper
Sta-Kon D10731SP – Frequently Asked Questions
1) What wire size and bolt size does the Sta-Kon D10731SP ring terminal take?
The Sta-Kon D10731SP is built for 8 AWG wire with a 3/8 inch bolt (stud) ring. The wire size is listed as 8/8AN, so it is a single-gauge barrel, not a range. If your conductor is 10 or 6 AWG, this is the wrong terminal, and if your lug pad is drilled for 1/4 or 5/16 hardware the 3/8 ring will sit loose on the stud.
2) Is the D10731SP terminal insulated or bare?
Bare. It is a non-insulated tubular ring terminal, so there is no nylon or vinyl sleeve over the barrel. Once crimped you need to insulate it yourself with heat shrink or tape where the install calls for it, or use it inside an enclosure or lug box where the connection is already protected.
3) What is the D10731SP ring terminal made of, and can I use it on aluminum conductors?
The barrel is copper, silver in color. Copper-only terminals are intended for copper conductors; aluminum or aluminum-to-copper runs need a terminal rated AL/CU, so do not put this on an aluminum feeder.
4) Do I need a special crimper for a non-insulated tubular ring terminal like this one?
Yes. Non-insulated tubular barrels are crimped with a die set for non-insulated terminals, not the color-coded insulated-terminal nests. For an 8 AWG barrel that usually means a heavier ratcheting or hydraulic crimp tool with the correct 8 AWG die. Crimp tooling is not supplied with the terminal.
5) How is the Sta-Kon D10731SP packaged, and what part number do I order?
Order it as Sta-Kon D10731SP. There is a single model, no finish or size options to pick, and it ships as a shelf pack rather than a single loose piece, so expect multiple terminals per pack when you are standardizing a panel or motor connection build.
6) Where is the Sta-Kon D10731SP terminal manufactured?
Manufacture is in Mexico. That is the stated country of origin, which is the line procurement and government or institutional buyers need for trade-compliance paperwork.
How fast can I get the Sta-Kon D10731SP delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Sta-Kon D10731SP come with a warranty?
Absolutely. The Sta-Kon D10731SP is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Sta-Kon D10731SP?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Sta-Kon D10731SP from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.