You may also like
NONINS RING TERM No6 5/16BH NKLPLTD
Manufacturer Resources
Product Specs
- Country Of Origin:
- Mexico (MX)
- Product Subgroup:
- General Terminals
- Product Type:
- Non-Insulated Ring Terminal
- Wire Size:
- 6/6AN
- Department:
- Electrical
- Product Group:
- Wire Termination
- Product Material:
- Copper
Sta-Kon E10721NP – Frequently Asked Questions
1) What wire size does the Sta-Kon E10721NP ring terminal take?
The E10721NP is sized for 6 AWG conductor. It's a non-insulated ring terminal, so the barrel is bare copper with no sleeve, and it has to be crimped with a die matched to 6 AWG non-insulated terminals. If your conductor is 8 or 4 AWG, this is the wrong barrel, go up or down a size.
2) Is the E10721NP terminal plated, and does that matter for outdoor or panel use?
It's nickel plated copper. Nickel plating holds up at higher temperature and resists corrosion better than a bare copper barrel, which is why these show up on motor leads, heater terminations, and ground connections in hot enclosures.
3) Should I use a non-insulated ring terminal or an insulated one for 6 AWG?
Non-insulated, like the E10721NP, is what you use when the termination will be covered another way, heat shrink, boot, or inside a terminal block, or when the joint runs hot enough that a nylon or vinyl sleeve would not survive. Pick an insulated ring terminal instead if you need the strain relief and dielectric covering built in and the connection sits in open air where conductors could touch.
4) Is a ring terminal or a spade terminal better for a 6 AWG battery or ground connection?
Use the ring, which is what the E10721NP is. A closed ring tongue cannot vibrate off the stud if the nut backs off, so it is the right choice for battery cables, grounding, and anything that shakes. A spade or fork tongue only earns its place where you need to pull the lead off without fully removing the nut.
5) Do I need a special crimper for the Sta-Kon E10721NP?
Yes, a 6 AWG non-insulated crimp die, typically a hex or oval die in a heavy hand tool or hydraulic crimper. The small plier-type crimpers sold for insulated 22-10 AWG terminals will not form this barrel. Nothing is included with the terminal, the tool is separate.
How fast can I get the Sta-Kon E10721NP delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Sta-Kon E10721NP come with a warranty?
Absolutely. The Sta-Kon E10721NP is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Sta-Kon E10721NP?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Sta-Kon E10721NP from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.