You may also like
1.25" – 1.5" Rain Collar
14122 - spec sheet
Features
- Non-fading collar material
- For warranty product details, refer to the Oatey Limited Warranty document
- Use as a protective water shield (slides down over pipe)
- No caulking needed
- Not for hot-mopped or built-up roofs
- Do not use petroleum based products on rubber collars
- Rated 180°F continuous heat and approved for Type B installations
14122 - spec sheet
Manufacturer Resources
Product Specs
- Volume:
- 0.01
- Department:
- Plumbing
- Product Group:
- Plumbing
- Product Subgroup:
- Fittings
- Product Type:
- General Fittings
- Product Finish:
- Black
- Product Material:
- Rubber
- Product Weight:
- 0.5
OATEY 14122 – Frequently Asked Questions
1) What pipe size does the Oatey 14122 rain collar fit?
The Oatey 14122 rain collar fits vent pipe from 1.25 inch up to 1.5 inch. It slides down over the pipe from above and seats against the flashing, so you want the pipe OD in that range or the collar will not grip.
2) Do I need to caulk around an Oatey rain collar when I install it?
No caulking is needed. The 14122 is a rubber collar that slides down over the vent pipe and shields the joint by itself, which is why it is a quick fix on a leaking vent penetration without pulling the flashing.
3) Can I use this rain collar on a hot-mopped or built-up roof?
No. The Oatey 14122 is specifically not for hot-mopped or built-up roofs. For those assemblies you need a flashing detail made for bitumen application instead.
4) Will a rubber rain collar hold up on a hot flue or B-vent?
The 14122 is rated for 180 degrees F continuous heat and is approved for Type B installations, so it suits B-vent and standard plumbing vent penetrations. It is not rated above that temperature, so single-wall flue applications running hotter are out.
5) Can I use roofing cement or a petroleum sealant with the Oatey rubber collar?
Don't. Petroleum based products are not to be used on Oatey rubber collars, they degrade the rubber. Since the 14122 needs no caulking, install it dry and leave sealants off the collar entirely.
6) Will the collar fade or chalk out after a few seasons in the sun?
The 14122 uses a non-fading collar material in black, so it keeps its appearance on exposed roof penetrations rather than graying out like untreated rubber.
7) What is the Oatey part number and weight for ordering rain collars in quantity?
Order it as Oatey 14122. Each collar weighs 0.5 lb and runs about 0.01 cubic feet of volume, so a case of them is easy to carry up a ladder for a multi-unit roof repair run.
How fast can I get the OATEY 14122 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the OATEY 14122 come with a warranty?
Absolutely. The OATEY 14122 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the OATEY 14122?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the OATEY 14122 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.