No-Calk® 1.25" – 1.5" Rain Collar
14205 - spec sheet
Features
- Do not use petroleum based products on rubber collars
- Non-fading collar material
- Not for hot-mopped or built-up roofs
- Rated 180°F continuous heat and approved for Type B installations
- No caulking needed
- Use as a protective water shield (slides down over pipe)
- For warranty product details, refer to the Oatey Limited Warranty document
14205 - spec sheet
Manufacturer Resources
Product Specs
- Volume:
- 0.011
- Department:
- Plumbing
- Product Group:
- Plumbing
- Product Subgroup:
- Fittings
- Product Type:
- General Fittings
- Product Finish:
- Black
- Product Material:
- Rubber
- Product Weight:
- 0.5
OATEY 14205 – Frequently Asked Questions
1) Can I use the Oatey 14205 rain collar on a hot-mopped or built-up roof?
No. The 14205 rubber rain collar is not for hot-mopped or built-up roofs. The hot asphalt and petroleum in those systems attack the rubber, and petroleum based products should not be used on these collars at all. For a hot-mopped assembly, use a flashing and collar system rated for it.
2) Is the Oatey 14205 rain collar OK over a hot vent or flue pipe?
It is rated for 180 degrees F continuous heat and approved for Type B installations. That covers Type B gas vent work within that temperature limit. Anything running hotter than 180 F continuous is outside what this rubber collar is rated for.
3) Does the Oatey No-Calk rain collar need caulk or sealant at the pipe?
No caulking is needed. The 14205 is a rubber collar that slides down over the vent pipe and acts as a protective water shield over the flashing, so there is no bead of sealant to tool or maintain. That also means nothing to re-caulk on a maintenance cycle, which is why property managers standardize on them.
4) Is a rain collar the same thing as a roof flashing, or do I need both?
They are two different parts. The flashing is what ties into the roofing and seals the penetration; the 14205 rain collar is a rubber ring that slides down the pipe over the top of that flashing as a secondary water shield. On a No-Calk type installation you buy the flashing for the roof and the collar for the pipe, sized 1.25 to 1.5 inch here.
5) What part number should I order for a 1-1/2 inch vent rain collar from Oatey?
Oatey part number 14205 covers 1.25 inch through 1.5 inch pipe. It ships as a single black rubber collar, about half a pound.
6) Will the Oatey rain collar fade or chalk after a few seasons in the sun?
The collar material is non-fading, and it is molded rubber in black. Black rubber is the standard on roof vent collars because it holds color under UV instead of graying out like a painted or pigmented part.
How fast can I get the OATEY 14205 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the OATEY 14205 come with a warranty?
Absolutely. The OATEY 14205 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the OATEY 14205?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the OATEY 14205 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.