3" Flex-Flash™ 10" x 13.25" base
14038 - spec sheet
Features
- Self-sealing collar slides over pipe and requires no caulking
- Rated 180°F continuous heat and approved for Type B installations
- Do not use petroleum based products or paint on flashing collar or plastic base
- 3-in. Flex Flash™ Roof Flashing
- Not for hot-mopped or built-up roofs
- For pitch from 0-45°
- 10" x 13.25" Flexible plastic base
- For warranty product details, refer to the Oatey Limited Warranty document
14038 - spec sheet
Manufacturer Resources
Product Specs
- Volume:
- 0.246
- Department:
- Plumbing
- Product Group:
- Plumbing
- Product Subgroup:
- Fittings
- Product Type:
- General Fittings
- Product Weight:
- 0.442
OATEY 14038 – Frequently Asked Questions
1) What pipe size does the Oatey 14038 Flex-Flash roof flashing fit?
The Oatey 14038 Flex-Flash is the 3 inch version, so it slides over a 3 inch vent pipe. The self-sealing collar seats around the pipe on its own, with no caulk or sealant needed at the collar.
2) What roof pitch can the Oatey 3 inch Flex-Flash be installed on?
It handles anything from a dead flat 0 degree roof up to a 45 degree pitch. The flexible plastic base, 10 by 13.25 inches, conforms to the slope as it is fastened down.
3) Will the Oatey Flex-Flash hold up over a hot vent stack or a Type B vent?
It is rated for 180 degrees F continuous heat and is approved for Type B installations, so it works over vents running at that temperature range.
4) Can I paint the Oatey 3 inch Flex-Flash or coat it with roof cement?
Keep petroleum based products and paint off both the flashing collar and the plastic base. They attack the materials. If you need the flashing to match the roof color, choose a flashing supplied in that color rather than coating this one.
5) Do I need sealant or a separate collar to install the Oatey Flex-Flash?
No separate collar or caulk at the pipe. The self-sealing collar is part of the unit and slides over the 3 inch pipe. You still fasten and weather-lap the base into the roofing per normal shingle practice.
6) How much roof area does the base of the Oatey 14038 cover?
The base measures 10 by 13.25 inches, which is what you need to plan your shingle overlap around. It is a light part, about 0.442 in listed product weight, so a single installer handles it easily on the roof.
7) What is the Oatey part number for the 3 inch Flex-Flash with the flexible base?
Order it as Oatey 14038. That is the manufacturer part number for the 3 inch Flex-Flash with the 10 by 13.25 inch flexible plastic base.
How fast can I get the OATEY 14038 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the OATEY 14038 come with a warranty?
Absolutely. The OATEY 14038 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the OATEY 14038?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the OATEY 14038 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.