All-Flash® No-Calk® 1.5 in. – 3 in. Galvanized Black 11 in. x 14.5 in. Base Roof Flashing
11873 - spec sheet
Features
- Approved for Type B installations
- Made of rust-proof, stamped 29 gauge galvanized steel
- Black Painted base
- Do not use paint or petroleum based products on rubber collars
- Roof flashing slides over DWV pipe for pitch to 40 degrees
- Not for hot-mopped or built-up roofs
- Non-fading sealing collar
11873 - spec sheet
Manufacturer Resources
Product Specs
- Base Size Diameter:
- 11" X 14.5"
- Volume:
- 0.174
- Department:
- Plumbing
- Product Group:
- Roofing
- Product Subgroup:
- Flashing and Flanges
- Product Type:
- Roof Flashing
- Product Finish:
- Black
- Product Material:
- Galvanized Steel
- Product Weight:
- 0.35
OATEY 11873 – Frequently Asked Questions
1) What roof pitch can this No-Calk vent flashing be used on?
Pitch up to 40 degrees. Above that you need a steep-pitch or adjustable flashing, not this one.
2) Can I use the Oatey 11873 on a hot-mopped or built-up roof?
No. The 11873 is not for hot-mopped or built-up roofs. For those assemblies use a flashing made for bitumen application. The 11873 is intended for shingle or similar sloped roof coverings where the base is nailed in and shingled over.
3) How big is the base on the Oatey 11873, and will it tuck under my shingle courses?
The stamped steel base measures 11 x 14.5 inches, which gives you enough flange to nail off on the up-slope side and lap the next shingle course over it. Lay out your opening against those dimensions before you cut the deck penetration.
4) Can I paint the Oatey 11873 flashing to match my roof?
The steel base already comes black, and you should not put paint or any petroleum based product on the rubber collar. Those products break the rubber down and you lose the seal at the stack.
5) Is this Oatey flashing approved for a Type B gas vent?
Yes, the 11873 is approved for Type B installations as well as standard DWV vent stacks in the 1.5 to 3 inch range.
6) Will the galvanized base on this Oatey flashing rust out on a dark roof?
The base is 29 gauge stamped galvanized steel with a black painted finish, so it resists rust and blends with dark shingles. The sealing collar is non-fading rubber.
7) What is the Oatey part number for the black 11 x 14.5 inch No-Calk roof flashing?
Order Oatey 11873. That is the All-Flash No-Calk unit with the black painted 29 gauge galvanized base and the 1.5 to 3 inch collar.
How fast can I get the OATEY 11873 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the OATEY 11873 come with a warranty?
Absolutely. The OATEY 11873 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the OATEY 11873?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the OATEY 11873 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.