Orca Hardware FTST Series Double Door Kit For Cabinet Track for Standard Drop Hangers

No track. The FTST-MINI-DDK double door kit supplies only the second-door hardware: two hangers, end stops, anti-jump blocks, door guides and all fasteners. Track comes with the single door kit (which includes a 5 foot track, hangers, spacers, end stops, anti-jump blocks, guides and fasteners). So for a two-door cabinet opening you order a single door kit plus this double door kit, and add track length if 5 feet won't span both panels.

1-3/8 inches maximum. The standard drop hangers in the FTST kit are drilled for panels at or under that thickness, which covers typical 3/4 inch cabinet doors and thinner decorative panels. A 1-3/4 inch door will not mount on this hardware.

No handing to specify. The FTST hardware is non-handed, so the same kit works whichever way the panels slide, and the two hangers can be mounted on either door of a pair.

Sidewall mount. The track fastens to the vertical face above the opening, cabinet frame or wall, rather than to a soffit or the underside of a shelf. Spacers supplied with the single door track kit set the standoff so the panel clears the cabinet face.

Anti-jump blocks in the kit keep the hangers from lifting off the track, and door guides at the floor or shelf line keep the bottom of each panel from swinging away. End stops set the travel limits at each end. All four pieces ship with the double door kit along with the fasteners.

It is rated for commercial use. Orca lists the FTST mini flat track as commercial-grade decorative interior sliding door hardware in steel, which covers casework in offices, hospitality millwork and multi-family unit cabinetry as well as residential. Stay within the 60 lb per panel and 1-3/8 inch thickness limits.