You may also like
PDQ XGT205 Grade 1 Double Dummy Cylindrical Lever Lock
Grade 1 Extra Heavy Duty Cylindrical Lock
The PDQ XGT205 is the Double Dummy function of the PDQ XGT Series Grade 1 Extra Heavy Duty Cylindrical Lock.
The PDQ XGT Series is an extra heavy duty cylindrical lock certified to ANSI/BHMA A156.2 Grade 1 and cycle tested to over 3 times the BHMA standard. A 2:1 latch bolt throw allows a 41 degree lever rotation with the 2-3/4" backset, which reduces torque and lengthens the life of the lock.
XGT is the step up from the GT Series for doors that face heavy abuse, with 3,000 lbf-in of lever torque resistance and a 13-gauge steel anti-rotation plate. It is assembled in Lancaster, PA.
Key Features
- Heavy duty diecast chassis with investment cast, cold rolled steel and stainless steel mechanism
- 13-gauge steel anti-rotation plate for added stability
- 3,000 lbf-in lever torque resistance, about 4 times the ANSI/BHMA standard
- Solid diecast Philadelphia, Boston or Miami levers on 3-3/8" wrought brass roses with concealed screws
- Non-handed; fits doors 1-3/4" to 2-1/4" thick with through-bolted mounting and a standard ANSI A156.115 (161) prep
- Keyed functions take a Schlage C compatible conventional cylinder, small format IC cores compatible with Best, Falcon and Arrow, or Schlage large format IC cores (Philadelphia lever only)
- UL 10C listed for 3-hour fire doors, single doors up to 4' x 8', and approved for the Florida High Velocity Hurricane Zone
- Complies with ADA and ICC/ANSI 117.1; Limited Lifetime Warranty on the mechanical lock
Technical Specifications
- Grade: Grade 1
- Lock Function: Double Dummy
- Keyed Function: Non-Keyed
- Lock Type: Cylindrical
- Backset (Distance): 2-3/4"
- Door Hand Direction: Non-Handed
- Fire Rated: Yes
- Warranty: Limited Lifetime
- ANSI Standard: A156.2
- Fire Rating: UL 10C 3-hour, single doors up to 4' x 8'
- Door thickness: 1-3/4" to 2-1/4" thick, preset for 1-3/4" door
- Application: Through door thru-bolting
- Door prep: Standard ANSI A156.115 (161) for cylindrical locks
- Backset: 2-3/4" standard, 2-3/8" optional
- Chassis: Heavy duty diecast, investment cast, chromated cold rolled steel and stainless steel mechanism; billet steel spindles for locking functions
- Front: 2-1/4" x 1-1/8", stainless steel or wrought brass, beveled 1/8" in 2"
- Strike: ASA standard; T-Strike or Full Lip Strike optional; stainless steel or wrought brass
- Levers: Philadelphia (SFL and LFL), Boston (SFL), Miami (SFL); solid diecast
- Rose: 3-3/8" DIA wrought brass, concealed screws
- Latchbolt: 1/2" throw for 2-3/8" backset, 9/16" throw for 2-3/4" backset
- Hand: Non-handed
- Lever rotation: 41 degree standard with 2-3/4" backset; 65 degree with 2-3/4" latch for double doors
- Keys: Two (2) per lock
- Keyways: SCC standard (Schlage C compatible); keyways of other manufacturers available
Available Options
- Finish: 605 - Bright Brass, 606 - Satin Brass, 613E - Dark Oxidized Satin Bronze, 619 - Satin Nickel, 622 - Flat Black, 625 - Bright Chrome, 626 - Satin Chrome
- Lever Style: Philadelphia, Boston, Miami
- Also selected when ordering: Backset, Strike, Tactile Abrasive Coating, Split Finishes, Lead-Lined Rose, Dust Box, Antimicrobial Coating, Request to Exit, Molex Connector, Weatherized Finish
Each configuration has its own PDQ part number, for example XGT205PHL605.
Certifications
- UL listed for 3 hrs, for single doors up to 4'0" x 8'0"
- Certified to ANSI/BHMA A156.2, Grade 1
- California Education Code compliant (functions XGT135, XGT135LED, XGT145)
- Federal Specification FF-H-10C (superseded by A156.2)
- Approved for Florida HVHZ, PDQ Product Approval FL 21376, design load +/- 70.0 PSF for single door (3' x 7')
- Complies with ADA and ICC/ANSI 117.1
Typical Applications
- High-traffic exterior entries
- Stairwells
- Doors facing heavy abuse or vandalism risk
Frequently Asked Questions
What is the difference between the PDQ XGT and GT cylindrical locks?
Both are ANSI/BHMA Grade 1. XGT is rated for 3,000 lbf-in of lever torque resistance, about 4 times the ANSI/BHMA standard, versus 2,200 lbf-in for GT. XGT also uses a 13-gauge steel anti-rotation plate and is cycle tested to over 3 times BHMA standards.
Is the XGT lock fire rated?
Yes. XGT is UL listed for 3-hour fire doors on single doors up to 4'0" x 8'0", meeting UL 10C requirements.
What door thicknesses and backsets fit the XGT lock?
XGT fits doors 1-3/4" to 2-1/4" thick (preset for 1-3/4") with a 2-3/8" or 2-3/4" backset, and it is non-handed, so one unit installs on any door hand.
Manufacturer Resources
PDQ XGT Series Architectural Submittal Sheet
Product Specs
- Department:
- Door Hardware
- Product Group:
- Mechanical Locks
- Product Subgroup:
- Bored Locksets
- Product Type:
- Leverset
- Product Category:
- Mechanical Locks
- Product Model:
- XGT205
- Commercial/Residential:
- Commercial
- Series:
- XGT Series
- Grade:
- Grade 1
- Lock Function:
- Double Dummy
- Keyed:
- No
- Electronic:
- No
- Door Hand Direction:
- Non-Handed
- Warranty:
- Limited Lifetime
- Tags:
- pdq xgt205, xgt205 pdq, xgt205
- Subcategory:
- Cylindrical Locks
- Duty Level:
- Extra Heavy Duty
- Product Attribute:
- Cylindrical Locks
- Lock Type:
- Cylindrical
- Handle Type:
- Lever
- Product Function:
- Double Dummy
- Keyed Function:
- Non-Keyed
- Backset (Distance):
- 2-3/4"
- Standard Latch:
- 1/2" Throw
- Standard Strike:
- ASA standard
- Fire Rated:
- Yes
- ADA Compliant:
- Yes
PDQ XGT205BSN626 – Frequently Asked Questions
1) Does the PDQ XGT205 double dummy lever have a latch or any working mechanism?
No. The XGT205 is the double dummy function of the PDQ XGT Series, so it is a pull-only trim: fixed levers on both faces of the door with no latchbolt, no cylinder and no key. It is non-keyed. Use it on an inactive leaf of a pair, a closet or a surface-bolted door where you only need something to pull on and nothing to latch. If the door has to latch, you need a latching XGT function instead.
2) Will a PDQ XGT205 dummy lever match the keyed XGT levers already on my other doors?
Yes, that is the point of it. The XGT205 uses the same XGT Series lever styles (Philadelphia, Boston, Miami) on the same 3-3/8 inch wrought brass rose with concealed screws as the keyed and passage XGT functions, in the same seven finishes. Spec the same lever style and finish code and the dummy leaf reads identically to the working doors.
3) Does the XGT205 need a 161 bore prep, or can I mount it on an undrilled door?
The XGT Series installs in the standard ANSI A156.115 (161) cylindrical prep and fits doors 1-3/4 to 2-1/4 inches thick, preset for 1-3/4 inch. For a dummy leaf that means you can drop it into an existing 161 bore left by an old cylindrical lock. On a door with no prep, you still bore to 161 to match the rest of the XGT openings.
4) Can I use the PDQ XGT205 on a 3-hour fire rated opening?
The XGT Series is UL 10C listed for 3-hour fire doors on single doors up to 4 feet by 8 feet. Note that a dummy lever does nothing to latch the door, so on a fire assembly the leaf still has to be held closed by other listed hardware, such as flush or automatic bolts on an inactive leaf.
5) What finishes and lever styles can I get the XGT205 dummy lever in?
Seven finishes: 605 bright brass, 606 satin brass, 613E dark oxidized satin bronze, 619 satin nickel, 622 flat black, 625 bright chrome and 626 satin chrome. Each comes with a Philadelphia, Boston or Miami lever, so 21 combinations in all. The part number carries both, for example XGT205PHL605 is a Philadelphia lever in bright brass.
6) Is the XGT205 handed? I have both left and right swing doors in the building.
Non-handed. One XGT205 installs on either hand, so a property manager stocking spares only needs one part number per lever style and finish rather than a left and a right.
7) Is a dummy lever strong enough for a high-abuse door, or will it get torn off?
The XGT Series is the extra heavy duty step up from PDQ's GT Series, built for doors facing heavy abuse, with 3,000 lbf-in of lever torque resistance and a 13-gauge steel anti-rotation plate behind the rose. Trim mounts through-bolted through the door rather than with wood screws into the face, which is what usually fails on an abused dummy leaf.
8) Does the XGT205 meet ADA lever requirements for a school or healthcare corridor?
The XGT Series complies with ADA and ICC/ANSI 117.1, and the lever shape itself satisfies the no-tight-grasping requirement. For low-vision applications you can add tactile abrasive coating on the inside only, outside only, or both sides. A lead-lined rose option is also available, which is what imaging suites usually need.
9) What do I have to specify when ordering a PDQ XGT205 besides finish?
Lever style and finish set the base part number. Beyond that the order form asks for backset and strike (which only matter on latching functions, not on the dummy), plus optional tactile abrasive coating, split finishes (designate outside trim first, then inside), lead-lined rose, dust box, antimicrobial coating (626 only) and weatherized finish (626 only). Split finishes are worth noting if the corridor side and room side of the opening use different finishes.
10) Is the XGT205 approved for Florida High Velocity Hurricane Zone work?
Yes. The XGT Series carries PDQ Product Approval FL 21376 for the Florida HVHZ, with a design load of plus or minus 70.0 PSF on a single 3 by 7 foot door. For exterior coastal openings the weatherized finish option is available in 626 satin chrome.
11) Is the XGT205 electrified or does it support request to exit?
The XGT205 itself is a mechanical, non-electronic product. A request to exit (REX) switch and an industry standard Molex connector appear as XGT Series order options, but a double dummy has no latch retraction or key cylinder to monitor, so electrified monitoring belongs on a latching function in the series rather than on the dummy trim.
How fast can I get the PDQ XGT205BSN626 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the PDQ XGT205BSN626 come with a warranty?
Absolutely. The PDQ XGT205BSN626 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the PDQ XGT205BSN626?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the PDQ XGT205BSN626 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.