You may also like
Manufacturer Resources
Spec Sheet
Product Specs
- Cable Type:
- PVC
- Connection:
- 4 Pin M12 Connector
- Contact Configuration:
- Isolated Solid State Relay
- Amperage Rating:
- 80 mA at 132 Vac / 110 mA at 132Vdc
- Cord Length:
- 8 IN
- Enclosure Material:
- Lens: Polycarbonate Cable Jacket: PVC Body: Structural Polyurethane Foam
- Environmental Rating:
- NEMA 1,3,4,4X,6,6P,12,13
- Input Voltage:
- 10-30 Vdc
- Led Indicators:
- Red output status
- Maximum Ac Current:
- 80 mA
- Maximum Dc Current:
- 110 mA
- Notes:
- For complete system; order sensor and retroreflector. Retroreflector not included
- Operating Mode:
- Non Polarized Retroreflective
- Operating Temperature:
- -13° to 131°F (-25° to 55°C)
- Protection:
- Current Limited for loads less than 32V AC or DC
- Sensor Type:
- Retroreflective
- Department:
- Electrical
- Product Length:
- .47 IN
- Product Diameter:
- .71 IN
- Switch Classification:
- Photoelectric
- Product Height:
- 2.75 IN
- Product Weight:
- .1313 LB
- Product Width:
- .71 IN
B-LINE 14150RL07 – Frequently Asked Questions
1) Does the B-Line 14150RL07 photoelectric sensor come with a reflector?
No. The 14150RL07 is a retroreflective sensor, which means it needs a separate retroreflector mounted opposite it to bounce the beam back. The retroreflector is not included, so order the sensor and the reflector together if you are building a complete system.
2) How does the 14150RL07 sensor wire in, and is there a pigtail or a plug?
Termination is a 4 pin M12 connector on an 8 inch PVC-jacketed pigtail. You supply the mating M12 cordset to run back to the panel, which means the sensor can be swapped without pulling new cable.
3) Can the B-Line Prism Series 14150RL07 be used in a washdown or outdoor location?
Yes. The sensor carries NEMA 1, 3, 4, 4X, 6, 6P, 12 and 13 environmental ratings, which covers washdown, corrosion, dust and temporary submersion duty. Operating range is -13 to 131 F (-25 to 55 C), so unheated docks and cold storage vestibules are within spec.
4) Is the 14150RL07 polarized, and will it see shiny or reflective targets?
It operates in non-polarized retroreflective mode. That matters on the job: a non-polarized head can be triggered by a shiny target or a reflective surface in the beam path, so if you are detecting mirror-finish product, wrapped pallets or glossy sheet, a polarized retroreflective sensor is the better choice.
5) How big is the 14150RL07 sensor body and will it fit a tight mounting bracket?
It is a tubular sensor measuring .71 inch diameter, .71 inch width, 2.75 inch height and .47 inch length, weighing about .13 lb. That small barrel footprint is what lets it tuck into door frames, conveyor rails and guarding where a rectangular block sensor won't go.
6) Can the 14150RL07 switch a 120 Vac load directly?
The output is an isolated solid state relay rated 80 mA at 132 Vac and 110 mA at 132 Vdc, so it can switch a small AC or DC load within those limits, such as a relay coil or PLC input. Maximum AC current is 80 mA and maximum DC current is 110 mA, so anything above that needs an interposing relay or contactor.
7) How do I tell if the B-Line 14150RL07 sensor is actually seeing its reflector?
There is a red LED on the sensor that shows output status. Aim the head at the retroreflector and watch the LED change state as you break and clear the beam, which is how you confirm alignment before buttoning up the guard or frame.
8) What is the 14150RL07 housing made of, and will it hold up to chemicals or impact?
The lens is polycarbonate, the body is structural polyurethane foam and the cable jacket is PVC. There is no metal barrel here, so it will not corrode in wet or chemically aggressive areas, but it is not the choice where the head takes direct mechanical impact.
How fast can I get the B-LINE 14150RL07 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 14150RL07 come with a warranty?
Absolutely. The B-LINE 14150RL07 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 14150RL07?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 14150RL07 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.